robrev
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 25, 2018, 11:51:14 AM |
|
Hey there, what's the results of RX 570 4GB? I gotta change my PSU before testing this maybe.
Temp/hash/consumption?
|
|
|
|
frankbuse
Newbie
Offline
Activity: 67
Merit: 0
|
|
February 25, 2018, 12:14:11 PM |
|
Anyone who can give me a good bat file for this I want to full mine XVG on, AMD rx580 Windows 10.
I am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net But I want this running asap
Thanks Claymore, for putting this online and the good work!
|
|
|
|
minerbaba
Newbie
Offline
Activity: 91
Merit: 0
|
|
February 25, 2018, 12:30:43 PM |
|
Hey there, what's the results of RX 570 4GB? I gotta change my PSU before testing this maybe.
Temp/hash/consumption?
915 kh/s at stock speed
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
February 25, 2018, 12:31:57 PM |
|
Anyone who can give me a good bat file for this I want to full mine XVG on, AMD rx580 Windows 10.
I am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net But I want this running asap
Thanks Claymore, for putting this online and the good work!
xvg doesn't have neoscrypt in multi-algo list. You can mine some neoscrypt coin and exchange it to xvg. On exchange or with miningpoolhub auto-exchange option
|
|
|
|
frankbuse
Newbie
Offline
Activity: 67
Merit: 0
|
|
February 25, 2018, 12:34:43 PM |
|
Anyone who can give me a good bat file for this I want to full mine XVG on, AMD rx580 Windows 10.
I am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net But I want this running asap
Thanks Claymore, for putting this online and the good work!
xvg doesn't have neoscrypt in multi-algo list. You can mine some neoscrypt coin and exchange it to xvg. On exchange or with miningpoolhub auto-exchange option Thank you, do you have a recommandationwhat to mine with my rx580 rig?
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
February 25, 2018, 01:11:32 PM |
|
Anyone who can give me a good bat file for this I want to full mine XVG on, AMD rx580 Windows 10.
I am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net But I want this running asap
Thanks Claymore, for putting this online and the good work!
xvg doesn't have neoscrypt in multi-algo list. You can mine some neoscrypt coin and exchange it to xvg. On exchange or with miningpoolhub auto-exchange option Thank you, do you have a recommandationwhat to mine with my rx580 rig? you can always check whattomine.com or similar sites ... and than think ...
|
|
|
|
stevascha
Member
Offline
Activity: 312
Merit: 10
|
|
February 25, 2018, 02:46:42 PM |
|
any benchmark vega 56? is the hash 2200hash like vega 64?
|
|
|
|
Nightworker88
Newbie
Offline
Activity: 64
Merit: 0
|
|
February 25, 2018, 02:53:32 PM |
|
Hello
First:
Claymore@ Thank you very much for your perfect work like always!!
Has somebody good IDEA/experience with a correct neoscrypt pool -best would be a neoscrypt autoswitch multipool??
|
|
|
|
robrev
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 25, 2018, 03:21:33 PM |
|
Claymore is an amazing and very intelligent person, thanks for another miner. Hey there, what's the results of RX 570 4GB? I gotta change my PSU before testing this maybe.
Temp/hash/consumption?
915 kh/s at stock speed Try 1300 and 2000~2100 memclock, might improve some %
|
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
February 25, 2018, 07:30:58 PM |
|
I have a 4 pcs RX580 GB in a 12 rig waiting to be populated ... 2600Watt PSU
Board not modded, Timing just adjusted for Etash.
Got an error when launching Neoscript miner:
Miner cann't take control of the GPU power control
Test done - A1,-A2 changed - No TTStop,No TT limit no Fanmin,No fan max basically I remove everything - No command after the EXE, everything is in the config 1. Install latest drivers. Done 2. Disable overclocking. Done. Back to the original timing. The only thing is that I left available only p7
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB. 64 GB, Done
5. Reboot computer. Done plenty of time
6. Check hardware, risers. Done
I run out of option / ideas
Two second after Dual mining again with XVG... because I don't know what to do
|
|
|
|
heavyarms1912
|
|
February 25, 2018, 07:48:22 PM |
|
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs. Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card. Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks.
|
|
|
|
Shnikes101
|
|
February 25, 2018, 07:53:16 PM |
|
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs. Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card. Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks. My Vegas were hanging around 60c last I checked - Similar settings 1408/1100@905mV
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
February 25, 2018, 07:59:08 PM Last edit: February 25, 2018, 08:14:17 PM by skablast |
|
Meanwhile... Real results, not only numbers but pictures of RX 570 4gb. But in Europe energy isn't cheap.. https://imgur.com/a/B3moM https://imgur.com/a/APGKG https://imgur.com/a/zYlcMRx 570 4 gb with kernel a1 around 700 undervolting core overvolting memory + 25W/board at the wall "memory controller isn't full or at least seem so" Rx 570 4 gb with kernel a2 around 800 undervolting core overvolting memory + 25W/board at the wall Rx 570 4 gb with kernel a2 around 700 stock, etash timing + 38W/board at the wall nicknamed MegaWASP by my kid. Back to dual mining, as its cheaper on the wall So, if I was able to run those, how I cannot have the pleasure to see the Rx 580 up and running?
|
|
|
|
heavyarms1912
|
|
February 25, 2018, 08:06:27 PM |
|
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs. Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card. Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks. My Vegas were hanging around 60c last I checked - Similar settings 1408/1100@905mV reference or AIB?
|
|
|
|
Shnikes101
|
|
February 25, 2018, 08:17:04 PM Last edit: February 25, 2018, 08:32:20 PM by Shnikes101 |
|
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs. Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card. Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks. My Vegas were hanging around 60c last I checked - Similar settings 1408/1100@905mV reference or AIB? Reference. Always had some sort of issue with Vega aftermarket cards. Checked again and still sitting at 60c. Fans are running at 90% though. Doing a quick restart and will grab rough power draw numbers for you. ----------- edit: power settled out at 275 watts per V64 measured at the wall. Going to need to find the time to update my table mods to Red's 900mV
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
February 25, 2018, 08:23:03 PM |
|
Decided to try out this miner on my old legacy Radeon 7970s rigs.
Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
February 25, 2018, 08:36:48 PM |
|
Decided to try out this miner on my old legacy Radeon 7970s rigs.
Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
I'm running my 7990 at 900/1500@950mv downclock, so only 700kh/s per gpu. But temps are acceptable.
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
February 25, 2018, 08:40:35 PM |
|
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs. Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card. Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks. My vega64 are liquid )) So no problems with temps. My vega56 is air-blower. It keeps 55 degrees gpu, 68 degrees hbm2 at 100% fan. But it is rather cold in that room )) There is one big concern - if downvolt settings will be f.cked of by something it can burn all around on stock voltage )) from 250 to 500 watt per card is not joke ))
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
February 25, 2018, 08:51:10 PM |
|
Decided to try out this miner on my old legacy Radeon 7970s rigs.
Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
I'm running my 7990 at 900/1500@950mv downclock, so only 700kh/s per gpu. But temps are acceptable. I haven't played around with the voltages on this also. But how is it compared to ZEC mining? I think with ZEC it was unstable at voltages so low.
|
|
|
|
|