gsanjin
Member
Offline
Activity: 191
Merit: 12
|
|
February 26, 2018, 11:27:16 PM |
|
Congratulations Claymore, you gave 280x's new life in those times of skyrocketing prices of new VGA's
|
|
|
|
badfad
Jr. Member
Offline
Activity: 186
Merit: 4
|
|
February 27, 2018, 01:39:17 AM |
|
I'm getting 1.95Mh on vega 56, ~1450 @ 955 v . Not sure how much W that is. So it's just as good as the 1080ti, which is nice. It can do more I think. Polaris cards seem to be capped at 1Mh, 580 or 480. Adrenalin drivers.
|
|
|
|
stevascha
Member
Offline
Activity: 312
Merit: 10
|
|
February 27, 2018, 02:29:02 AM |
|
I'm getting 1.95Mh on vega 56, ~1450 @ 955 v . Not sure how much W that is. So it's just as good as the 1080ti, which is nice. It can do more I think. Polaris cards seem to be capped at 1Mh, 580 or 480. Adrenalin drivers. need consumption watt information so it can be compared with 1080ti result
|
|
|
|
Nightworker88
Newbie
Offline
Activity: 64
Merit: 0
|
|
February 27, 2018, 02:54:27 AM |
|
Somebody knows a good pool for neoscrypt?
maybe a pool switching automatically between best neoscrypt coins?
thanks for ideas
|
|
|
|
yobigd20
Member
Offline
Activity: 170
Merit: 10
|
|
February 27, 2018, 04:07:22 AM |
|
Hopefully a fair amount of "my amd pulls 75 watts from the wall" noobs will burn out there psu's using this , knocking them out of the game and bringing difficulty back down to sane levels.
|
|
|
|
Rewqpro
Newbie
Offline
Activity: 53
Merit: 0
|
|
February 27, 2018, 07:44:22 AM |
|
850 h/s with 570 Nitro+
1520 h/s with Fury X Sapphire.
Watt consumption is around 300 W for Fury
Is that on the wall wattage? Basically, I have 650W 90+ Gold PSU for two Fury X; when I overclock GPUs more, PSU starts to switch off - so these are rough calculations, but true
|
|
|
|
dragonmike
|
|
February 27, 2018, 09:52:25 AM |
|
Nice work on this Miner, Claymore. Doing a stable 2.24mh/s @ 230w with Vega 64`s! One minor issue, i see some tendencies of the miner hangs gpu devices when quitting the miner, i have to do a hard reboot in order for the cards to get in their normal state again. This may be something to do with my current OC settings, not sure.
Can you share how you achieved this? Pretty decent hashrate/watt ratio as a matter of fact. I expect you used the 64 liquid bios?
|
|
|
|
kithanu
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 27, 2018, 12:07:29 PM |
|
Somebody knows a good pool for neoscrypt?
maybe a pool switching automatically between best neoscrypt coins?
thanks for ideas
altminer.net does this and i've been using it since getting this miner, going good so far (its user friendliness is a bit odd though, the pool addresses you have to figure out by things scattered around the page, not all in one line)
|
|
|
|
|
Unclegogi
Newbie
Offline
Activity: 44
Merit: 0
|
|
February 27, 2018, 02:04:33 PM |
|
4 x Vega56 with Vega64 BIOS with clocks 1340/1050MHz @ 900mV, hashrate is ~ 4 x 1.8 Mh/s, power consumption ~= 1050W from the wall. Same rig with same settings on XMR gives hashrate 4 x 1750MH/s, power consumption ~= 710W from the wall.
|
|
|
|
cod3gen
Member
Offline
Activity: 311
Merit: 69
PowerMining.pw
|
|
February 27, 2018, 02:57:08 PM |
|
Can you share how you achieved this? Pretty decent hashrate/watt ratio as a matter of fact. I expect you used the 64 liquid bios?
Havent given the liquid bios a try yet, maybe i should try it. Had to lower the clocks slightly. Current settings are 1625/950 and 1090/950. Power target at 20% and temp target to 60c giving about 2.215Mh/s for almost 20 hours straight. 1656/950 gave 2.24 Mh/s but the computer would hang after a couple hours. Actual GPU clock is about 1463 Mhz at 0.894v. Latest Adrenalin driver, wattage have not been confirmed on wall.
|
|
|
|
heavyarms1912
|
|
February 27, 2018, 03:43:12 PM |
|
4 x Vega56 with Vega64 BIOS with clocks 1340/1050MHz @ 900mV, hashrate is ~ 4 x 1.8 Mh/s, power consumption ~= 1050W from the wall. Same rig with same settings on XMR gives hashrate 4 x 1750MH/s, power consumption ~= 710W from the wall.
Could you share you soft_pp settings.
|
|
|
|
Unclegogi
Newbie
Offline
Activity: 44
Merit: 0
|
|
February 27, 2018, 04:44:48 PM |
|
Could you share you soft_pp settings. I have taken some shared soft PP reg file with 1408/1050 clocks and only lowered the GPU clock. Settings: GPU_P0=852;900 GPU_P1=991;900 GPU_P2=1084;900 GPU_P3=1138;900 GPU_P4=1150;900 GPU_P5=1202;900 GPU_P6=1212;905 GPU_P7=1340;905 Mem_P0=167;900 Mem_P1=500;900 Mem_P2=800;900 Mem_P3=1050;900 Fan_Min=10 Fan_Max=4900 Fan_Target=60 Fan_Acoustic=2400 Power_Temp=85 Power_Target=0 So my cards consume about 250W each with 1.8Mh/s hashrate, profit/consumption ratio is not really good.
|
|
|
|
robrev
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 27, 2018, 05:25:28 PM |
|
Meanwhile... Real results, not only numbers but pictures of RX 570 4gb. But in Europe energy isn't cheap.. https://imgur.com/a/B3moM https://imgur.com/a/APGKG https://imgur.com/a/zYlcMRx 570 4 gb with kernel a1 around 700 undervolting core overvolting memory + 25W/board at the wall "memory controller isn't full or at least seem so" Rx 570 4 gb with kernel a2 around 800 undervolting core overvolting memory + 25W/board at the wall Rx 570 4 gb with kernel a2 around 700 stock, etash timing + 38W/board at the wall nicknamed MegaWASP by my kid. Back to dual mining, as its cheaper on the wall So, if I was able to run those, how I cannot have the pleasure to see the Rx 580 up and running? Wow these are bad results Try downclocking memory and overclocking clocks, you'll get much better results.
|
|
|
|
dragonmike
|
|
February 27, 2018, 09:54:38 PM |
|
Can you share how you achieved this? Pretty decent hashrate/watt ratio as a matter of fact. I expect you used the 64 liquid bios?
Havent given the liquid bios a try yet, maybe i should try it. Had to lower the clocks slightly. Current settings are 1625/950 and 1090/950. Power target at 20% and temp target to 60c giving about 2.215Mh/s for almost 20 hours straight. 1656/950 gave 2.24 Mh/s but the computer would hang after a couple hours. Actual GPU clock is about 1463 Mhz at 0.894v. Latest Adrenalin driver, wattage have not been confirmed on wall. Impressive. I need to tweak. Just need some time to do it. Did you try with the august blockchain driver by any chance? I'm still sporting that antiquity as it's still the fastest driver for CastXMR. So I'd need a good reason to switch!
|
|
|
|
ejoe
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 27, 2018, 10:17:43 PM |
|
Vega 56 ref, blockchain driver 1.464 Mh/s (1.364 Mh/s with monitor) GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20 250 W from wall, 80 W idle
|
|
|
|
|
heavyarms1912
|
|
February 27, 2018, 11:32:42 PM |
|
Vega 56 ref, blockchain driver 1.464 Mh/s (1.364 Mh/s with monitor) GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20 250 W from wall, 80 W idle
too high volts for core on that one. Here's mine quick results Vega 56 ref. with 64 bios 1.835 MH/s @ 1375/1050 at 856mV
|
|
|
|
ejoe
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 28, 2018, 12:06:09 AM |
|
Vega 56 ref, blockchain driver 1.464 Mh/s (1.364 Mh/s with monitor) GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20 250 W from wall, 80 W idle
too high volts for core on that one. Here's mine quick results Vega 56 ref. with 64 bios 1.835 MH/s @ 1375/1050 at 856mV This sets hashrate to 1.272 Mh/s and power consumption to 244 W (80) on a device with itself 56 BIOS.
|
|
|
|
badfad
Jr. Member
Offline
Activity: 186
Merit: 4
|
|
February 28, 2018, 03:03:04 AM |
|
Further testing: Vega56: 1.95 Mh/s, 1430 Mhz, 0.9V, 212 W in Gpu-Z, so 250-260 for the whole card and riser? 580s : 1.1Mh/s @ 160 W in gpu-z - these can surely eat less W. 480s : 1Mh/s @ 90-120 W in gpu-z. 7.1Mh/s from 5 polaris + 1 vega, good
|
|
|
|
|