MindMiner v6.21 - miner manager program with online monitoring

[abudfv2008]

ravenj & abudfv2008

Please, try version 2.74. I change some include. May be fixed it.

2.75 seems to work normally. But still no info from blockmasters.

[Quake4]

MindMiner 2.76

* Updated cryptodradge to version 0.8.0.

[abudfv2008]

MindMiner 2.76

* Updated cryptodradge to version 0.8.0.

MM Autoupdated. But left 2 xmrig miners opened.(I don't know why there were 2).
MM Tried to start trex - and it crashed. Because 1 xmrig was mining.
Some debug would be usefull. And also hang miners should be killed more thoroughly.
And again MM is hanging on pool request.

[Quake4]

2.75 seems to work normally.

I'm very happy. It isnt normally. ;(

2.75 seems to work normally. But still no info from blockmasters.

Try this.
create bmtest.ps1 with content in pools folder

Code:

Write-Host "BM.Test: start $([datetime]::Now)"
try {
	$RequestStatus = Get-UrlAsJson "http://blockmasters.co/api/status"
	if ($RequestStatus) { Write-Host "1: True" } else { Write-Host "1: False" }
}
catch { Write-Host "1: $_" }

Write-Host "BM.Test: 1 $([datetime]::Now)"

try {
	$RequestCurrency = Get-UrlAsJson "http://blockmasters.co/api/currencies"
	if ($RequestCurrency) { Write-Host "2: True" } else { Write-Host "2: False" }
}
catch { Write-Host "2: $_" }

Write-Host "BM.Test: 2 $([datetime]::Now)"

try {
	$res1 = Invoke-WebRequest "http://blockmasters.co/api/status" -TimeoutSec 15 -UseBasicParsing
	Write-Host "Lenght: $($res1.RawContentLength)"
}
catch { Write-Host "3: $_" }

Write-Host "BM.Test: 3 $([datetime]::Now)"

try {
	$res2 = Invoke-WebRequest "http://blockmasters.co/api/currencies" -TimeoutSec 15 -UseBasicParsing
	Write-Host "Lenght: $($res2.RawContentLength)"
}
catch { Write-Host "4: $_" }

Write-Host "BM.Test: end $([datetime]::Now)"

Aнд гo тo pyccиaн thread ...

[Quake4]

MM Autoupdated. But left 2 xmrig miners opened.(I don't know why there were 2).

Maybe you closed the window by X.

And again MM is hanging on pool request.

Yes, api not answer. Its not normal (api not answer), but you can only off this pool.

[ravenj]

For me it's perfect now.

Thank you.

Best regards

[Quake4]

MindMiner 2.77

* Updated ccminer klaust to version 8.22.
* Added support safecoin on zergpool.
* Updated ccminer t-rex to 0.5.3.

[Quake4]

Cause all my new benchmarks are mined there instead in my address as it states in the console...

Fee: MindMiner has development fee 1% and all benchmarks. https://github.com/Quake4/MindMiner#fee

[ravenj]

Equihash not reporting speed (Fails!)

[Quake4]

Equihash not reporting speed (Fails!)

What a miner?
And check windefender settings for blocked connections of programms.

[nu2mlock]

I started benchmarking but when I got back an hour later something had crashed (or otherwise stopped) and two of my rigs had restarted.

However, next time I started MindMiner, it seems to skip benchmarking. There are a LOT left to bechmark, but it doesn't seem to do it. How can I continue benchmarking? Same on both.

Also, when starting MindMiner, it seems to take, maybe 10 minutes before it starts mining. It seems to be stuck at "Pool requests", but eventually start mining.

Edit: Perhaps it fixed itself? After mining something for 17 minutes, it seems like it's started benchmarking again. I think.

Edit 2: I found another rig that seems to have stopped benchmarking, even though it's far from done. This doesn't make any sense at all.

Edit 3: Sigh.. Well, the third rig now also seem to have gone back to benchmarking again, which is good. I don't know why it mined lyra2v2 fo 40 minutes before deciding to benchmark again. I have no idea what is happening.

Edit 4: Is it supposed to show these many "Failed" tries? https://imgur.com/a/beZsFaF

[Quake4]

MindMiner 2.79

* Fixed minimum miners grow to wrong profit.

[Quake4]

I started benchmarking but when I got back an hour later something had crashed (or otherwise stopped) and two of my rigs had restarted.

However, next time I started MindMiner, it seems to skip benchmarking. There are a LOT left to bechmark, but it doesn't seem to do it. How can I continue benchmarking? Same on both.

Also, when starting MindMiner, it seems to take, maybe 10 minutes before it starts mining. It seems to be stuck at "Pool requests", but eventually start mining.

Edit: Perhaps it fixed itself? After mining something for 17 minutes, it seems like it's started benchmarking again. I think.

Edit 2: I found another rig that seems to have stopped benchmarking, even though it's far from done. This doesn't make any sense at all.

Edit 3: Sigh.. Well, the third rig now also seem to have gone back to benchmarking again, which is good. I don't know why it mined lyra2v2 fo 40 minutes before deciding to benchmark again. I have no idea what is happening.

Edit 4: Is it supposed to show these many "Failed" tries? https://imgur.com/a/beZsFaF

To run the benchmarks is needed your confirmation. If the programm is restarted, needed confirm to run benchmaks.
The long Pool request is mean that one or more is enabled pool isnt answer. Change VL by press V to Full and look on top is who offline or not answer.
Failed mean:
- miner isnt run or exit after run
- no speed readed from api
- you close miner while it is working.

[nu2mlock]

Yes, it turned out that it was pools that was the reason for it not working. I had to disable Block Masters, Hashrefinery, Zpool and Zergpool. If any of those was enabled, it would take forever to do a pool request.

[Etherion]

Please add Ethminer as it has no defveen so no stopping and is as profible as claymore

https://github.com/ethereum-mining/ethminer

[Quake4]

MindMiner 2.80

* Added support of new regional stratums on Zpool.
* Updated default value of minimum miners to 25.
* Remove old stat for pools & miners.
* Added cpuminer for cryply coin on yespower algo.
* Updated ccminer t-rex to version 0.5.5.

[LeeMcTired]

Quake4, I was benchmarking tonight after the latest update, and had two different rigs shut down whilst starting on Phi2. Is this algo sensitive to clock speeds and what do you recommend for 1080Ti?

[Quake4]

Quake4, I was benchmarking tonight after the latest update, and had two different rigs shut down whilst starting on Phi2. Is this algo sensitive to clock speeds and what do you recommend for 1080Ti?

It is individual. Try: PL 85, Core +100, Mem 0.

[LeeMcTired]

Thanks, tried a few more times but not much luck on one of the rigs. Will try it on the other one later.
PL 65, Core +100, Mem 0
PL 65, Core 0, Mem 0
PL 85, Core +100, Mem 0
PL 85, Core 0, Mem 0

The first  three settings crashed as soon as it start, and the last setting the benchmark was almost complete, however it crashed also.
I will skip this algo for mining.

Thanks for all the updates and latest miners.

[Quake4]

Thanks, tried a few more times but not much luck on one of the rigs. Will try it on the other one later.
PL 65, Core +100, Mem 0
PL 65, Core 0, Mem 0
PL 85, Core +100, Mem 0
PL 85, Core 0, Mem 0

The first  three settings crashed as soon as it start, and the last setting the benchmark was almost complete, however it crashed also.
I will skip this algo for mining.

Thanks for all the updates and latest miners.

Try: PL 85, Core -100, Mem 0

Disable in algorithms.txt: "DisabledAlgorithms": [ "Phi2" ]