MindMiner v6.21 - miner manager program with online monitoring

[ltc_bilic]

MRR calculations...where it says in red if the hashrates differ - which is usefull when you're upgrading.

[Quake4]

Do you want to see a request to update the speed of the rig on MRR for each algo with different speed?

[ltc_bilic]

Do you want to see a request to update the speed of the rig on MRR for each algo with different speed?

Yes that would be helpful.

When there's a new miner update hashrates usually don't match,...so to bring this up on demand would be very helpful:

[ltc_bilic]

hi,

can you pls add new VTC fork - VerthashMiner (Verthash algo) and also add MRR support on it.

Thanks

[Quake4]

can you pls add new VTC fork - VerthashMiner (Verthash algo) and also add MRR support on it.

No. No api port for read speed of miner.

[ltc_bilic]

OK, Thanks.

Here's anothe one for you: there's an issue with MRR if two orders are submited to the same rig within 2 min of time frame,...one order if left out. This happens to me quite frequently and it's annoying. I've reached out to MRR support and this is their response: "you should look into using the rig group api, it will make sure that only 1 gets rented at a time". So is it possible to implement group api so this doesn't happen in the future?

[ltc_bilic]

Another annoyance: every now and then I get following warning when MM restarts "MRR: Not authorized! Check Key and Secret."
Then to speed up, I change something - any value in MRR.txt config, restart MM and usually it connects again. Sometimes it takes 2 or 3 tries...few times the reconnect was too late and already lost a client because of 20 min no hash policy on MRR. How does that work? Can we improve it and make it more reliable? Or is it just coincidence that their servers are having issues?

[Quake4]

Another annoyance: every now and then I get following warning when MM restarts "MRR: Not authorized! Check Key and Secret."
Then to speed up, I change something - any value in MRR.txt config, restart MM and usually it connects again. Sometimes it takes 2 or 3 tries...few times the reconnect was too late and already lost a client because of 20 min no hash policy on MRR. How does that work? Can we improve it and make it more reliable?

use different keys for each rig

[Quake4]

Here's anothe one for you: there's an issue with MRR if two orders are submited to the same rig within 2 min of time frame,...one order if left out. This happens to me quite frequently and it's annoying. I've reached out to MRR support and this is their response: "you should look into using the rig group api, it will make sure that only 1 gets rented at a time". So is it possible to implement group api so this doesn't happen in the future?

Thanks, I'll take a look.

[ltc_bilic]

Another quirk probably related to group api,...you need to bring rig down for maintenance, you set the "Enabled" flag as false, and you exit MM throught Alt+Q...when it's shutting down it lists as the algos are disabled when you shut down,...but in reallity they are not. If you go to MRR it still says "Available". So I had quite often problems when servicing rigs,...well on the plus side it definitely made me work faster But another quirk, that might be worth looking into.

[Quake4]

you set the "Enabled" flag as false, and you exit MM throught Alt+Q...

Do not disable Enabled for MRR. Just press Alt+Q.
only in this case, the rigs will be disabled.

[ltc_bilic]

you set the "Enabled" flag as false, and you exit MM throught Alt+Q...

Do not disable Enabled for MRR. Just press Alt+Q.
only in this case, the rigs will be disabled.

OK, but if everything is dynamic (when you edit configs, or hashrates, power consumption...etc), don't see a reason why this part is different.

It's very useful for diagnosing problems on rigs. Example:
1) waiting for rent to stop
2) ALT + q
3) edit MRR config file to disable
4) rerun MM - to see the rig in action

By improving it you cut down 2 steps, it's much faster.

[Quake4]

1) waiting for rent to stop

Before, You must wait for MM look at end rent:
active mining on MRR must go off (and MM must be enable all algos at MRR and do price increase).

[lcorail]

Greetings, about MindMiner 7.19, who knows how to configure the 2Miners.config.txt file, since I added a parameter but it did not work. Is there an example how to do it?
And I also get an MRR error and in the POOL config file for MRR add the Key and secret from the MRR site.

Errror 1:
Pool(s) request ...
Set coin symbol from list (ETH, ETC) in '2Miners.config.txt' file.
Setted default coin as ETH.


Error 2:
MRR: Not authorized! Check Key and Secret.

[Quake4]

read `config.md`

1. its warning
2. copy past values from mmr into this config

Code:

{
    "Enabled": true,
    "Key":  "key",
    "Secret":  "secret"
}

[lcorail]

Hello, thank you very much for the information. and apologies for not being able to figure out how to fix this error when mining: "Error send state to online monitoring: null value in column "Key ID" violates not-null constraint".
I would really appreciate if I could correct that.

[Quake4]

Hello, thank you very much for the information. and apologies for not being able to figure out how to fix this error when mining: "Error send state to online monitoring: null value in column "Key ID" violates not-null constraint".
I would really appreciate if I could correct that.

Your API key was purge (due one week no any activity). Generate the new one.

[lcorail]

Dear, greetings and I tell you to download the latest version of MindMiner 7.93, configure it according to the script step by step, in the MRR Pool I created my RIGS and its respective API KEY, but after a while the script is executing and working, the error "MRR: Not authorized! Check Key and Secret." begins to appear, I generate another API KEY again and it works again, but after a while the error begins, also after configuring and doing When running the script, the message "Error send state to online monitoring: null value in column "Key ID" appears. I don't know what I'm doing wrong. Does anyone have any tips, video or other document that can configure everything well without the one in the internet portal?