Corsair HX1200i PSU pinout

[bobix]

Hi folks!

Is here somebody using a Corsair HX1200i PSU? If I ask kindly, could you please show me the pinout diagram of this specific PSU? I did not find it anywhere on the internet. As far as I know the PSU comes with only 4 pieces of PCIE cables, albeit you could connect 6 of them to run a 6-gpu rig. Am I right?

Thanks a lot for your input in advance!

[1715417500]

1715417500

[1715417500]

1715417500

[1715417500]

1715417500

[1715417500]

1715417500

[cpmcgrat]

Hi folks!

Is here somebody using a Corsair HX1200i PSU? If I ask kindly, could you please show me the pinout diagram of this specific PSU? I did not find it anywhere on the internet. As far as I know the PSU comes with only 4 pieces of PCIE cables, albeit you could connect 6 of them to run a 6-gpu rig. Am I right?

Thanks a lot for your input in advance!

Just use a splitter cable. Should be able to run 2 GPUs off each PCIe port on the power supply without any issue.

[philipma1957]

Hi folks!

Is here somebody using a Corsair HX1200i PSU? If I ask kindly, could you please show me the pinout diagram of this specific PSU? I did not find it anywhere on the internet. As far as I know the PSU comes with only 4 pieces of PCIE cables, albeit you could connect 6 of them to run a 6-gpu rig. Am I right?

Thanks a lot for your input in advance!

you don't need the pin out you need cables

i will get you a link

type 3 dual head pcie cable only 6.99 each  one cable runs a nvidia 1080ti

http://www.corsair.com/en-us/type-3-flat-black-ribbon-cable-pcie-6-2-pin-dual-connectors-compatible-with-all-type-3-pin-out-psu

you can connect 5 dual head pcie for 5 1080ti's

you need 1 jack for the cpu cable.
six jacks 4 for pcie 2 for cpu
or 5 for pcie 1 for cpu

[jillscarbrough]

I didn't have that product but with those power capacity, it must be four PCIe cable split into eight PCIe connector (one cable with two connectors in the end). Those kinds of connector would product max power 300 Watt except one single cable with one connector in the end and we are using a Y splitter, it would produce max power 150 Watt with combined that two connectors of Y splitter.

So, if you are using 6 GPUs with single power on it (8 Pins or 6 Pins) it can be handled with those PSU without any splitter.