SHOW ME YOUR RACK! Miner Porn Thread

[a18kiska]

let us see that rack

[philipma1957]

8 slot onda b 250

https://i.imgur.com/BmO8cmm.jpg






pcie wire free rx 460 build

[a18kiska]

Nice!

Here is the inside of one of ours as it is being built...they're mostly 1070ti and 1080ti combos

[fanatic26]

I dont normally do this, but for you ill let you see my rack.

[BaNgTHai]

I dont normally do this, but for you ill let you see my rack.

Fkn Badass

[Rody81]

My outdoor mining box (credit to TwoTonHashing for the idea):

https://www.youtube.com/watch?v=pA47BG6XPOY&lc=z23fhpfhgpeagtzexacdp430nfj3uazgfkvwnxx3j11w03c010c

[CryptoMiner4Life]

Nice....


a18kiska - Im running the same 4u case as you on my 6th 8gpu build now..... Firstly sweeet build can i ask you a few questions...

What rack rails are you using for the 4u mining racks?
Whats the config of the 3 front internal fans blow out? or blow in? Take it you upgraded these? I went 3000rpm for those.
Whats the config of the AC Infinity using about each miner? Is the lid off? and what direction is the airflow?

Cheers

[a18kiska]

Nice....


a18kiska - Im running the same 4u case as you on my 6th 8gpu build now..... Firstly sweeet build can i ask you a few questions...

What rack rails are you using for the 4u mining racks?
Whats the config of the 3 front internal fans blow out? or blow in? Take it you upgraded these? I went 3000rpm for those.
Whats the config of the AC Infinity using about each miner? Is the lid off? and what direction is the airflow?

Cheers

Rails: https://www.amazon.com/gp/product/B01D3FJ5HC/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

All airflow goes in the front and out of the back.

The 3 front fans blow out at 5200RPM/240CFM. There are also two in the back running at 9000RPM/132CFM.

The lids are on, AC Infinity fans are reversed so they also blow out the back and remove any heat radiating from the lid. All of the heat is exhausted through the ceiling and, depending on success of this ICO, cold air will be moved through the floor and pulled up by the miners.

[gotminer]

[Shnikes101]

Only miners I have on a rack are the Vegas in the garage

[Yars]

Have some old photos of some server cases I built.
Since there no possibility to buy mining server cases in my country, I converted some old HP ML350/370 G3 and G4 servers I got for free into this :

https://imgur.com/a/b0lX8
https://imgur.com/a/30UVB

And there is some of them in a rack :

https://imgur.com/a/FiqLd

I know it's really ugly, but it works.
And sorry for bad quality photos, had a broken camera phone.

[a18kiska]

Only miners I have on a rack are the Vegas in the garage

Are the rest zip tied to a shoe rack?

Very nice. Nicest open air we've stumbled across so far

[a18kiska]

Have some old photos of some server cases I built.
Since there no possibility to buy mining server cases in my country, I converted some old HP ML350/370 G3 and G4 servers I got for free into this :

https://imgur.com/a/b0lX8
https://imgur.com/a/30UVB

And there is some of them in a rack :

https://imgur.com/a/FiqLd

I know it's really ugly, but it works.
And sorry for bad quality photos, had a broken camera phone.

ay whatever works, right? nice -- the enclosed cases are just sooooo much cleaner

[Dumpfdoesel]

https://i.imgur.com/Sit37Dr.jpg

Very clean setup!

[Subutai]

https://i.imgur.com/Sit37Dr.jpg

This is honestly super nice for an at-home setup. Very clean and well setup.

[whitrzac]

My wire management sucks, or maybe I just dgaf...

[Alyeska]

My First intention was to completely max out one rig before expanding rig two and then eventually three, but after placing 13 GPU's on the first frame and gauging the power consumption and what my wiring should be able to consistently handle running 24 hours a day, I spread my cards out over three rigs and then spread them around the home, so as to have no single rig running over 1100 watts, well under the home 110 volt wiring specs, since my circuit breakers are all 30 amp fuses, I am using less than half of what the breakers would pop at this way,

these are 20 EVGA 1070 ti SC Hybrids, with a random single 1070 ti, and an old GTX 970 that I put to work as the far left card on the first rig, 11,000 Sol/s (Equihash) combined for the three rigs,

with room to expand some if desired,

[charlie137]

niiice!

[Shnikes101]

Are the rest zip tied to a shoe rack?

Haha yes, they actually are. Got to start somewhere!

[mochaaa]

https://imgur.com/a/peKkr
https://imgur.com/a/dXUBi
https://imgur.com/a/isx9y