Nvidia GeForce GTX 1070

[Acido213]

Hi,

Any one know what the best mining settings are for this video card??
GTX 1070
8GB 256-Bit GDDR5
Core Clock 1506 MHz
Boost Clock 1683 MHz
1 x DVI 1 x HDMI 2.0b 3 x DisplayPort 1.4
1920 CUDA Cores
PCI Express 3.0

Thanks  

[GazWales]

Hey, i use Afterburner & set 75% power 500+ mem 50+core.

I get 490-500 SOL on equihash.

Without changing the settings i get 506 SOL.

so I loose 6 SOL for 25% power - good trade off IMO.

Is this your only card?



Cheers

[Acido213]

I also have one gtx 1060 in the same computer,

Thanks.

[GazWales]

Do you use any of them as your display card?

I found using the IGPU increased the speed of the card that was being used as a display card.

If you dont use a display i had to purchase a dummy HDMI plug to force the IGPU to think it connected incase you teamviewer into the box or RDP.

Im not sure at which point, i dont think its 2 cards in same system you will need to change the PCIE settings to Gen 1 or 2 in the BIOS.

[javier468]

I´have 3 MSI GTX 1070 Gaming X overclocked to +500mhz memory +100mhz core
I mine cryptonight with a power consumption of 95w per GPU.

[Acido213]

The gtx 1070 is my main display.

[iLoveMFB]

I think most people use it to dig the ether or zec, and that's the big coin. and the other thing is to dig up the xdag, and maybe it will explode.

[Acido213]

XDAG??

[Rough_R]

In my rig i have 6pcs Gigabyte 1070 G1 8gb
in Afterburner set 70% power,650+ mem and 50+core.
and have temp around 60C, 31,5-32,0 mh/s and about 110w from wall.
and main display card is int.Intel.
What is your VGA model?

[GazWales]

The gtx 1070 is my main display.

If you have onboard GPU i would swap to that - helped my 570 a fair amount.

I was getting 29MH then 8MH then 29MH then 8MH so effectively every other "Hash report" from claymore was loosing 2/3 Hash on the card.

Swapped to display as IGPU and now solid 29MH.