|
fabry1999 (OP)
|
 |
March 07, 2018, 10:39:13 AM |
|
How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?
Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?
thx
|
Fabrizio
|
|
|
|
|
|
|
|
Be very wary of relying on JavaScript for security on crypto sites. The site can change the JavaScript at any time unless you take unusual precautions, and browsers are not generally known for their airtight security.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
RapBTC1
Jr. Member
 Offline
Activity: 95
Merit: 1
|
|
March 07, 2018, 10:55:33 AM |
|
Hi,
do you have try with CMD ? command prompt ?
|
Equihash/DCR Discord Disscusion (WITH EFUDD) Discord (https://discord.gg/srNt6py) |
|
|
Njeroe
Newbie
Offline
Activity: 48
Merit: 0
|
|
March 07, 2018, 11:55:30 AM |
|
How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?
Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?
thx
Atiflash only supports one digit numbers, so turn off half the cards, then flash the other half... |
|
|
|
|
RYXES
Member
Offline
Activity: 140
Merit: 10
Merit me or don't.
|
|
March 07, 2018, 01:32:29 PM |
|
How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?
Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?
thx
For risk against bricking your GPUs, it is much better to flash your GPU cards one at a time. I know it is a long and slow process but you only have to do it once each and then you're done to mine indefinitely. Try and not cut corners when you're setting up your mining rig. |
Merit me or don't.
|
|
|
yaaisinile
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 14, 2018, 09:45:22 AM |
|
How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?
Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?
thx
use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support) like: atiflash -pa -fa -fm -fs -fp asus588.rom |
|
|
|
|
|
fabry1999 (OP)
|
|
March 14, 2018, 09:56:18 AM |
|
How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?
Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?
thx
use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support) like: atiflash -pa -fa -fm -fs -fp asus588.rom I can't do in this way, as I wrote I have different card that use different bios |
Fabrizio
|
|
|
|
baga105
|
|
March 14, 2018, 10:37:55 AM |
|
Then flash it 1 by 1. And you won't screw up  The slowest but the best way to do it. |
Ass, Gas or Grass! No one rides for free!
|
|
|
hack4love
Newbie
Offline
Activity: 152
Merit: 0
|
|
March 14, 2018, 11:51:57 AM |
|
Can you tell me what driver you using and what OS
|
|
|
|
|
yaaisinile
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 15, 2018, 01:36:34 AM |
|
How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?
Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?
thx
use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support) like: atiflash -pa -fa -fm -fs -fp asus588.rom I can't do in this way, as I wrote I have different card that use different bios There's no way around it.,The tool could not identify more than 9 digits. |
|
|
|
|
Bigdrago
Newbie
Offline
Activity: 312
Merit: 0
|
|
April 01, 2018, 10:50:26 AM |
|
Anyone solved this? I have 13 gpu I need to flash.
|
|
|
|
|
Bigdrago
Newbie
Offline
Activity: 312
Merit: 0
|
|
April 01, 2018, 11:08:02 AM |
|
How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?
Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?
thx
use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support) like: atiflash -pa -fa -fm -fs -fp asus588.rom How is this going to discover more than 10 gpu? -fa Force flashing bypassing already-programmed check. -fm Force flashing bypassing BIOS memory config check. -fs Force flashing bypassing BIOS SSID check. -fp Force flashing bypassing BIOS P/N check. |
|
|
|
|
|
jmigdlc99
|
|
April 01, 2018, 12:27:31 PM
Last edit: April 03, 2018, 04:37:06 PM by jmigdlc99 |
|
I was previously in the same boat as you and similarly wasn't able find any documentation on how to do this with more than 9 GPUs as well. Save yourself all the trouble and simply just do it on another PC with less GPUs. You could borrow a PC if you don't have an extra one lying around. Much easier than flashing the wrong GPU, then have to deal with all the trouble of not being able to boot and all that.
|
0xacBBa937A57ecE1298B5d350f40C0Eb16eC5fA4B
|
|
|
Bigdrago
Newbie
Offline
Activity: 312
Merit: 0
|
|
April 01, 2018, 12:57:45 PM |
|
Can't find any documentation on how to do this with more than 9 as well. Save yourself all the trouble and simply just do it on another PC with less GPUs. Borrow a PC if you dont have an extra one lying around. Much easier than flashing the wrong GPU, then have to deal with all the trouble of not being able to boot and all that.
Ok. I am unable to attach a monitor since all is remote. Guess I have to disable 6 cards in device manager and flash 6+7 cards. All cards have same memory. |
|
|
|
|
samet_9511
Jr. Member
Offline
Activity: 81
Merit: 7
|
|
October 08, 2018, 02:14:02 AM |
|
I have 12 GPU in a rig. All graphic cards are the same. How could I flash all of them in one shot ?
|
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
October 08, 2018, 07:11:21 AM |
|
How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?
Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?
thx
use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support) like: atiflash -pa -fa -fm -fs -fp asus588.rom How is this going to discover more than 10 gpu? -fa Force flashing bypassing already-programmed check. -fm Force flashing bypassing BIOS memory config check. -fs Force flashing bypassing BIOS SSID check. -fp Force flashing bypassing BIOS P/N check. Those forced commands are just bypassing safety checks. Don't use them unless you are completely sure that you know what you're doing. The only necessary argument is -pa which flashes all cards with the selected bios. |
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
October 08, 2018, 08:37:25 AM |
|
All you need to do is just unplug the riser from the Mobo PCIe slot and alternate to get the rest of the GPUs. Your GPUs don't need to be physically unplugged as that would require too much work if it's a tight setup when they are right next to each other.
If you can't stick your hand in the motherboard then you can also disconnect the GPU by unplugging the USB from the GPU side of the riser.
|
|
|
|
|
huntingthesnark
|
|
October 08, 2018, 11:44:56 AM |
|
Can't find any documentation on how to do this with more than 9 as well. Save yourself all the trouble and simply just do it on another PC with less GPUs. Borrow a PC if you dont have an extra one lying around. Much easier than flashing the wrong GPU, then have to deal with all the trouble of not being able to boot and all that.
Ok. I am unable to attach a monitor since all is remote. Guess I have to disable 6 cards in device manager and flash 6+7 cards. All cards have same memory. As others have said, I really wouldn't try flashing a multi-card rig remotely. It is 'possible', but inevitably you'll flash the wrong bios and all hell will break loose. Really is better to do one at a time. |
|
|
|
|
wtfonly16
|
|
October 08, 2018, 07:15:15 PM |
|
i know how to flash 13 gpu system!!!
unplug 12 gpus and flash one by one.
EZ
!!!bonus points!!! if you have some beat up old pc, use that as a test bench. just slot ur gpu that needs to be flashed in and go! this pc can be ultra portable and compact so you can put it right beside ur rig, then just take usb slider cable and powercables from testbench and plug it in!!! dont even have to move the gpu!
|
ye i aint bares
|
|
|
fenixlz
Newbie
Offline
Activity: 39
Merit: 0
|
|
May 12, 2021, 03:40:25 AM |
|
For risk against bricking your GPUs, it is much better to flash your GPU cards one at a time.
I know it is a long and slow process but you only have to do it once each and then you're done to mine indefinitely.
Try and not cut corners when you're setting up your mining rig.
This is complete bullshit. You are talking about risks but then suggesting to switch off ALL the safety checks before flashing? I was flashing cards remotely for years and did not a single card was screwed up. For the inital question. Just use new version, it is called AMDVBFLASH version 4.69. It flashes 10, 11, 12, etc. cards no problem. |
|
|
|
|
|
Bitbtc8
|
|
May 12, 2021, 06:29:39 AM |
|
You are doing it wrong, I've been warned several times to never have another GPU on board when you plan to flash bios because the app can be confused and you will end up bricking the GPUs, so do it one after the other, insert Just one GPU in your motherboard and flash it, repeat this process to be on safer side
|
|
|
|
|
