Zotac P106-100 heat issue

[Wipro]

Securing the Blockchain Ecosystem

|| | | |

Blocksafetech team offering 6 percent BSAFE tokens through this Bounty Program. This Bounty Campaign will start on the 16.05.2019 and proceed till the 15.08.2019.

1 BSAFE token = 0.50 USD

BOUNTY ALLOCATION

• 25% - Facebook campaign
• 25% - Twitter campaign
• 10% - Article campaign
• 10% - Youtube campaign
• 20% - Translation campaign
• 10% -  Telegram campaign

GENERAL RULES

• 1. Every participants must join our official group in Telegram HERE. Do not leave the group before the end of this campaign.
• 2. Every participant must sign up using the given proper form. Submission of an application on the thread without proper signup will result in no match within our counting application.
• 3. BlokSafe Tech team reserves the right to adjust the reward amount, depending on the number of applicants in each of the bounty campaigns.
• 4. Any application with improper information will be disqualified without notice (i.e. Multiple alts, scam and etc...)
• 5. Please check your wallet address which you submit via form, this cannot be changed till the end of the bounty.
• 6. When the bounty ends, you will have 7 days for any questions/complaints
• 7. You can request changes to update your weekly stake status within 7 days after each week's review(above-mentioned campaigns). We will not make any adjustments if the deadline is passed.
• 8. We count your activities in stakes and generate the ratio between stakes and coins in the final calculation. All final rewards will be in BSAFE Token.

If you are disqualified for any reason, you will NOT receive any bounty rewards.
 
All rights reserved by BlokSafe Tech team, Team can make any changes to rules or terms and conditions, if applicable.
For Bounty related support during the bounty campaign, to ask questions about bounty please PM us at anytime and wait for the response.
 
By signing up for the bounty, you're accepting these above terms

Rules

• Participant should like and share official Facebook page: https://www.facebook.com/BlockSafeTech/
• Must like and share every post published by the official Facebook page.
• Minimum 2 posts and 3 shares with Hash tags #BlockSafe #BSAFE #STO required to get the stakes
• Participant's every share post must be public.
• Every week you need to submit the report on this bounty thread
• Don't create a new post for further weeks, just edit the previous week submission and post it

NOTE: Minimum(Total:5) 2 original posts and 3 shares must share with above mentioned Hashtags throughout the week.
 
Rewards

• 100-500 Followers/Friends : 3 Stakes per week.
• 500-1500 Followers/Friends : 5 Stakes per week.
• 1500-3000 Followers/Friends : 7 Stakes per week.
• 3000 Plus Followers/Friends : 10 Stakes per week.

Reporting Format (must reply to thread)

Code:

Week: 1 (mm/dd/yyyy)-(mm/dd/yyyy)
BitcoinTalk Name: 
Your Facebook Account Name:
Your Facebook Profile Link: 

Links to the shares&likes: 

1- (mm/dd): 
2- (mm/dd): 

 

How to join:

1. To sign up follow the link:

2. Spreadsheet:

Rules

• You must follow the official twitter account: https://twitter.com/blocksafetech
• You must retweet and like all tweets by @blocksafetech and use hash tags #BlockSafe #BSAFE #STO. (use all 3 tags every week).
• You must tweet at least 2 of your original tweet about BlockSafe and use hash tags #BlockSafe #BSAFE #STO.
• Twitter accounts must be cryptocurrency related, real and have at least 90% of real followers (twitter audit).
• Every week you need to submit the report on this bounty thread
• Don't create a new post for further weeks, just edit the previous week submission and post it

NOTE: Minimum(Total:5) 2 original tweets and 3 retweets must share with above mentioned Hashtags throughout the week.
 
Rewards

• 500-1500 Followers : 3 Stakes per week.
• 1500-3000 Followers : 5 Stakes per week.
• 3000-5000 Followers : 7 Stakes per week.
• 5000 and above Followers : 10 Stakes per week.

Reporting Format (must reply to thread)

Code:

Week: 1 (mm/dd/yyyy)-(mm/dd/yyyy)
BitcoinTalk Name: 
Your Twitter Account Name:
Your Twitter Profile Link: 

Links to the shares&likes: 

1- (mm/dd): 
2- (mm/dd): 

How to join:

1. To sign up follow the link:

2. Spreadsheet:

Rules

• Blogs and Sites eligible for this bounty campaign are:
  -Blogger
  -Medium
  -Quora
  -Reddit
  -Wordpress
  -Websites with Alexa Traffic Rank of less than 1,000,000 (and Regional Traffic Rank less than 250,000)
• The blog/article must be focused on the relevant topic. It must convey positively about Blocksafe technologies.
• Blog posts must have at least 500 words.
• Only original content will be accepted.
• Articles must be available until the end of this campaign. Removal/deletion of the post prior to that will result in disqualification and no stakes.
• The article must have a link to our website, telegram channel and Bitcointalk Ann thread.
• URL Shortener links (TinyURL, Bit.ly, etc.) will not be valid
• Please provide your bitcointalk username and profile at the end of the article so that the authenticity can be verified and easy to define a stakes for you.
• maximum submissions by any participant = 5 articles + 5 forum posts

Rewards

• Low Quality : 1 stakes
• Average Quality : 3 stakes
• High Quality : 6 stakes

How to join:

1. To sign up follow the link:

2. Spreadsheet:

Produce a good review video of the BlockSafe project by following the below norms:

Rules

• All content will be judged by the criteria: quality, views and effects.
• Video must be at least 2 minute, videos shorter are not accepted.
• Your channel has at least 50 subscribers.
• You should make the video in English languages only.
• You will receive a reward at the end of the week, depending on the quality and popularity of your work.
• The video must be original. Copying graphics, text and other content are not allowed. (You can use official images, logos, images posted on websites, ANN-topic, Twitter and Facebook)
• To prove authorship, your Bitcointalk profile must be added to the video description.

Rewards

• Low Quality : 3 stakes
• Average Quality : 7 stakes
• High Quality : 10 stakes

How to join:

1. To sign up follow the link:

2. Spreadsheet:

Earn stakes for translating our Website, Whitepaper, Announcement+Bounty Thread and actively moderating it
How to join: Apply on this thread with link to your previous links and submit with the required details on below given form. Participants will be picked manually.
 
Rules

• Translations must be original. The use of any translation tools, such as Google Translator, WordLens and etc, are strictly prohibited. (FAILING THAT, you will be blacklisted and will NOT receive any reward)
• The translation should be done by own, should not be use any translation tool. Using automated translation tools (e.g.Google Translate, WordLens, etc.) will result in disqualification.
• For stake counting, only the posts of the OP should be moderated in the translator's language. Translators should be active, if OP(you) becomes inactive, another Moderator will be replaced for updating and moderating the thread.
• The BlockSafe Team reserves their right to change these terms or apply new ones.

Rewards

• ANN thread+Bounty Thread+Moderation/Management: 10 Stakes
• White Paper translation: 6 Stakes
• Website translation: 4 Stakes

List of Translators

NOTE: Will be updated upon acceptance.

Arabic
Chinese
English
Farsi
French
Hindi
Italian
Indonesian
Japanese
Korean
German
Polish
Greek
Portuguese
Romanian
Russian
Slovenian
Spanish
Tagalog
Thai
Turkish
Vietnamese

How to join:

1. To sign up follow the link:

2. Spreadsheet:

Rules

• You must Stay in the group until the final calculation of this campaign to receive your stakes.
• You must be active in the group at least once per week

Rewards

• Join the telegram Group - 3 Stake / week
• Wear The Avatar - 2 Stakes / week
• Add "BlockSafe Supporter" to your telegram username - 5 Stakes / week

Avatar for Telegram:

https://i.imgur.com/krvMe5B.png

 

How to join:

1. To sign up follow the link:

2. Spreadsheet:

| | | |

[1715296981]

1715296981

[1715296981]

1715296981

[1715296981]

1715296981

[smoolae]

I have made the 8 cards Rx 470 cards rig for mining ethereum. I did not get any issue so far mining with these cards. No heat or riser problem everything went perfect.
Yesterday I bought Zotac P106-100  6GB 2 cards after I have connected those card with the newly added 1000 watts power supply. I am getting heat almost 84deg C. I am really worry this is moderate heat or not.

If this is too high. I want some experts advice to solve it.

I use perfectmine OS, Nanopool Ethhash mining. Please advice bros.

Yeah, 84C is a bit high for sure. You should widen the gaps between GPUs or turn up the fan speed. Do you have any software that can alter the GPU fan speed?

[Howardroid]

I have zotac 1080 and I use standup fan to blow directly from front (gpu fan sides) from 6 feet away.  https://i.imgur.com/UAjSuNl.png
Custom fan, mostly run at 70%-75%

[Elder III]

It sounds like they are running at the default fan profile. As far as I know all of the GTX 10xx series are set to go up to ~83C or so before the fan ramps up much. Generally you're better off just setting a static fan speed of 50-80% depending on your how hot it is. You will typically get allot better efficiency and the close to the same or even higher hashrate by running 70-80% power limit and a bit of an overclock. This makes your GPUs run allot cooler too and prolongs their lifespan.

[Wipro]

I have made the 8 cards Rx 470 cards rig for mining ethereum. I did not get any issue so far mining with these cards. No heat or riser problem everything went perfect.
Yesterday I bought Zotac P106-100  6GB 2 cards after I have connected those card with the newly added 1000 watts power supply. I am getting heat almost 84deg C. I am really worry this is moderate heat or not.

If this is too high. I want some experts advice to solve it.

I use perfectmine OS, Nanopool Ethhash mining. Please advice bros.

Yeah, 84C is a bit high for sure. You should widen the gaps between GPUs or turn up the fan speed. Do you have any software that can alter the GPU fan speed?

Thanks for the idea mate. Let me try and inform you how it works for me. You know that other Rx 470 cards does not have these issue. I did not over clocked these cards also but that cards maximum goes upto 65deg Celsius only.

I am using the perfectmine to monitor control it. To have a fan control option they asks me to update the licence for 30 USD per month. I have heard that hive os would works better and cost of licence also very cheap. If have any suggestion to control the fan please let me. I will try that buddy.

[shibob]

What's your fan speed setting? I'm mining with a lot P106-100 as well, but they never go above 67C, even some of my 106-100 are from Asus which doesnt have good cooling design: https://www.asus.com/Graphics-Cards/MINING-P106-6G/

Actually 84C is too much. You may have some tests with my setting as following: power limit - 85% (with this limit my P106-100 still could achieve 23 Mh/s), fan speed - auto (I'm using MSI afterburner for this, make sure you modify the curvature of fan speed vs. GPU's temp if GPU's temp is still high).

[smoolae]

I have made the 8 cards Rx 470 cards rig for mining ethereum. I did not get any issue so far mining with these cards. No heat or riser problem everything went perfect.
Yesterday I bought Zotac P106-100  6GB 2 cards after I have connected those card with the newly added 1000 watts power supply. I am getting heat almost 84deg C. I am really worry this is moderate heat or not.

If this is too high. I want some experts advice to solve it.

I use perfectmine OS, Nanopool Ethhash mining. Please advice bros.

Yeah, 84C is a bit high for sure. You should widen the gaps between GPUs or turn up the fan speed. Do you have any software that can alter the GPU fan speed?

Thanks for the idea mate. Let me try and inform you how it works for me. You know that other Rx 470 cards does not have these issue. I did not over clocked these cards also but that cards maximum goes upto 65deg Celsius only.

I am using the perfectmine to monitor control it. To have a fan control option they asks me to update the licence for 30 USD per month. I have heard that hive os would works better and cost of licence also very cheap. If have any suggestion to control the fan please let me. I will try that buddy.

30 USD monthly sounds like a no-go for me. You can get a free copy of Win 10 or Linux for mining. Yeah, they sometimes need more time for setting up initially but everything else later is simple to do on them.

[cryptofriendz]

I have made the 8 cards Rx 470 cards rig for mining ethereum. I did not get any issue so far mining with these cards. No heat or riser problem everything went perfect.
Yesterday I bought Zotac P106-100  6GB 2 cards after I have connected those card with the newly added 1000 watts power supply. I am getting heat almost 84deg C. I am really worry this is moderate heat or not.

If this is too high. I want some experts advice to solve it.

I use perfectmine OS, Nanopool Ethhash mining. Please advice bros.

Yeah, 84C is a bit high for sure. You should widen the gaps between GPUs or turn up the fan speed. Do you have any software that can alter the GPU fan speed?

Thanks for the idea mate. Let me try and inform you how it works for me. You know that other Rx 470 cards does not have these issue. I did not over clocked these cards also but that cards maximum goes upto 65deg Celsius only.

I am using the perfectmine to monitor control it. To have a fan control option they asks me to update the licence for 30 USD per month. I have heard that hive os would works better and cost of licence also very cheap. If have any suggestion to control the fan please let me. I will try that buddy.

30 USD monthly sounds like a no-go for me. You can get a free copy of Win 10 or Linux for mining. Yeah, they sometimes need more time for setting up initially but everything else later is simple to do on them.

Dude its way too much. Your GPUs should run between 40-50 C. Otherwise the lifespan is screwed...

[Wipro]

I have made the 8 cards Rx 470 cards rig for mining ethereum. I did not get any issue so far mining with these cards. No heat or riser problem everything went perfect.
Yesterday I bought Zotac P106-100  6GB 2 cards after I have connected those card with the newly added 1000 watts power supply. I am getting heat almost 84deg C. I am really worry this is moderate heat or not.

If this is too high. I want some experts advice to solve it.

I use perfectmine OS, Nanopool Ethhash mining. Please advice bros.

Yeah, 84C is a bit high for sure. You should widen the gaps between GPUs or turn up the fan speed. Do you have any software that can alter the GPU fan speed?

Thanks for the idea mate. Let me try and inform you how it works for me. You know that other Rx 470 cards does not have these issue. I did not over clocked these cards also but that cards maximum goes upto 65deg Celsius only.

I am using the perfectmine to monitor control it. To have a fan control option they asks me to update the licence for 30 USD per month. I have heard that hive os would works better and cost of licence also very cheap. If have any suggestion to control the fan please let me. I will try that buddy.

30 USD monthly sounds like a no-go for me. You can get a free copy of Win 10 or Linux for mining. Yeah, they sometimes need more time for setting up initially but everything else later is simple to do on them.

Dude its way too much. Your GPUs should run between 40-50 C. Otherwise the lifespan is screwed...

This is right! Even when go to overclock the card we need to maintain it under air conditioner if you do the average OC.
Some people do changes on BIOS setting and make the mining rig efficient to give the high rate of hashes but I am not looking for that to put my card on trash.

Is there any OS preferably used for mining purpose only like perfectmine. I do not want to pay more 10 USD for license.