Faster and Autonomous Large Bitcoin Collider upgrade

[Andzhig]

Here is a list of address's. But I cant get it to work inside the program. How do either A) change the limit inside of the program to a higher range than only 33 or 34 characters, or is there any fast way to edit this list to only 33-34 characters?

https://raw.githubusercontent.com/userghost123/BTC-Address-6-7-18/master/README.md

Sometimes this is buggy (?), You can try to replace it with copy by one address by replacing the already written. Was going to hunt millions of Satoshi? why would not he still be a deceased person (?).

***

Is it the last hex that automatically picks up from lastkey.txt or does it have to be added manually from there? Does the entire address list check the specified or the first one from the list?

[Sokolik4]

Upload somebody to the topic of the compiled file

[Andzhig]

The program exactly works correctly?

Let's start with the address 0000000000000000000000000000000000000000000000000000000000000001 (hex 01) he finds it for us KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M7rFU73sVHnoWn.

but what kind of bulkhead does it do after from the updated lastkey.txt

KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M7rFU73sVHnoWn 1
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M7xi8un3t62wBb
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M85dZv9TJssePg
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M8AUa2CqP9oedm
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M8EdRppsqMADSs
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M8JYuXdodLgKyv
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M8LriXkwQ9iWRv
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M8PPudhBmA42fj

FU7 has already flown or has not reached yet?

KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M7rFU74sHUHy8S 3
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M7rFU76rnZwVdz 7
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M7rFU77MfhviY5 8
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjgd9M7rFU7Dq8Au4Pv 21

[holy_ship]

I do not understand what exactly you complain about.
VG from NDV goes DOWN - in opposite direction to LBC.

If you want to check it, pick for example 17E6C640 hex and it should
find first 29 bounties in several seconds (on GPU like 1070).

[Andzhig]

That is he is walking the other way. And when we give him 54 he to 53 begins to stamp (and not to 55, 56), ok. I was looking for a few days in another direction.

If you want to check it

Yeah i already checked wrote about this.

[Sokolik4]

That is he is walking the other way. And when we give him 54 he to 53 begins to stamp (and not to 55, 56), ok. I was looking for a few days in another direction.

If you want to check it

Yeah i already checked wrote about this.

Good day. I understand it is necessary to compile the files from here - https://github.com/ndv/vanitygen
Can you leave a link to an already compiled and ready to run program?

[Andzhig]

That is he is walking the other way. And when we give him 54 he to 53 begins to stamp (and not to 55, 56), ok. I was looking for a few days in another direction.

If you want to check it

Yeah i already checked wrote about this.

Good day. I understand it is necessary to compile the files from here - https://github.com/ndv/vanitygen
Can you leave a link to an already compiled and ready to run program?

So you already downloaded it from there, there already exe is oclvanitygen.exe https://github.com/ndv/vanitygen  green button "clone or download".

[Sokolik4]

That is he is walking the other way. And when we give him 54 he to 53 begins to stamp (and not to 55, 56), ok. I was looking for a few days in another direction.

If you want to check it

Yeah i already checked wrote about this.

Good day. I understand it is necessary to compile the files from here - https://github.com/ndv/vanitygen
Can you leave a link to an already compiled and ready to run program?

So you already downloaded it from there, there already exe is oclvanitygen.exe https://github.com/ndv/vanitygen  green button "clone or download".

Well, yes, I downloaded it, only it does not start on Windows 10 64 bit)

[Andzhig]

and the 55 winner iiis https://bitcointalk.org/index.php?topic=1306983.msg39808009#msg39808009 some Spaniard Portuguese Gespani

55
KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYjidyYKE5NcJQZYvknA
000000000000000000000000000000000000000000000000006ABE1F9B67E114
https://lbc.cryptoguru.org/dio/234729613217731

[Sokolik4]

In general, the script downloaded again and it started. Magic pancake. But I can not run 2 video cards in 1 window. Only 2 copies of the program are allowed to run, one for each video card.
The command does not work.
-D 1:1 -D 1:0

[darito21]

Hi
Im trying to make it run in a fresh ubuntu 14 vps without luck!
I get lot of errors after compile

Any input here?
I was able tu successfully run the standard vanitygen version, but no way with this one.
I have installed all necessary dependences too.

Is anyone running it in an ubuntu 14 machine?
Thanks

[holy_ship]

VPS ? 

[darito21]

VPS ? 

 
Just for testing, I create an ubuntu virtualbox server from scratch with 16gb of ram and 8threads just to install and test, because if something goes wrong with dependencies then I just clone the original "fresh" setup and start again.
I was able to successfully run some modified versions of Vanitygen but not luck with this.

[holy_ship]

>run some modified versions of Vanitygen but not luck with this

Maybe it's a bit confusing, but NDV didn't do any mods to vanitygen. Only oclvanitygen.

Only weakminded do LBC on CPU, as even with good GPU with 50-100MKeys one needs several years to check puzzle56 range. And gazillion years to find any real wallet.

[sensimilia]

Getting something better without any benefit is a hard thing. People want to have real money if you need something from them. And one more thing about contacting, it can be better to give some link.

[Yahkinator]

Hello,
I have it up and running, but want to test that it is working correctly.

I run

oclvanitygen -f addresses.txt -o found.txt -k lastkey.txt 000000000000000000000000000000000000000000000000000006bd3b27c500

and would expect it to find the private key to 1PiFuqGpG8yGM5v6rNHWS3TjsG6awgEGA1 almost immediately since the private key is 6bd3b27c591.

It doesn't.  It blows past that private key without logging anything.

It is likely I'm doing something wrong, but I can't see the trees from the forest right now.  Can you advise?

Thanks!

[Andzhig]

he goes the other way from bigger to smaller. take that 000000000000000000000000000000000000000000000000000006bd3b27c800.

to start multiple cards you can create cmd file bablabla.cmd

@echo off

cd "C:\Users\***\Desktop\your program folder"
start oclvanitygen.exe -D 0:0 -f addresses.txt -o found.txt -k lastkey.txt 000000000000000000000000bcab2d0d6efd742d4526094aca3b2bafa0315dc9

cd "C:\Users\***\Desktop\your program folder"
start oclvanitygen.exe -D 1:0 -f addresses.txt -o found.txt -k lastkey.txt 000000000000000000000000e66dd7d60bea90d43de86c199cd2d2a7ab82cd82

exit

so that the window turns off after start /min can add.

[Yahkinator]

he goes the other way from bigger to smaller. take that 000000000000000000000000000000000000000000000000000006bd3b27c800.

Still doesn't find it.  This mean anything to you?

oclvanitygen -v -f addresses.txt -o found.txt -k lastkey.txt 000000000000000000000000000000000000000000000000000006bd3b27c800
Start with 000000000000000000000000000000000000000000000000000006bd3b27c800
Searching for 160 addresses
Device: Intel(R) HD Graphics 4600
Vendor: Intel(R) Corporation (8086)
Driver: 20.19.15.4531
Profile: FULL_PROFILE
Version: OpenCL 1.2
Max compute units: 20
Max workgroup size: 512
Global memory: 1708759450
Max allocation: 427189862
OpenCL compiler flags: -DDEEP_PREPROC_UNROLL -DLOCAL_MEM_SIZE=65520
Loading kernel binary a278d6da1e690bf2f16f62f7f94db316.oclbin
allocsize=427189862, memsize=1708759450
Grid size: 1280x2048
Modular inverse: 10240 threads, 256 ops each
Bitmap size (bytes): 427189862

Start a thread81920/131072

Copy 1280 sequential points to the device
Copy the row stride array to the device
Move the row increments forward
Copy 1280 sequential points to the device
[1.52 Mkey/s][total 2621440]
Move the row increments forward
Copy 1280 sequential points to the device
Wait for the GPU to complete its job
Found -4593 candidadtes, check on CPU
CPU check failed
[1.62 Mkey/s][total 5242880]
Move the row increments forward
Copy 1280 sequential points to the device
Wait for the GPU to complete its job
Found -4593 candidadtes, check on CPU
CPU check failed
[1.65 Mkey/s][total 7864320]
Move the row increments forward
Copy 1280 sequential points to the device
Wait for the GPU to complete its job
Found -4593 candidadtes, check on CPU
CPU check failed
[1.66 Mkey/s][total 10485760]
Move the row increments forward
Copy 1280 sequential points to the device
Wait for the GPU to complete its job
Found -4592 candidadtes, check on CPU
CPU check failed
[1.68 Mkey/s][total 13107200]
save the priv. key to a file
Copy 1280 sequential points to the device
Copy the row stride array to the device
Move the row increments forward
Copy 1280 sequential points to the device
Wait for the GPU to complete its job
Found -4597 candidadtes, check on CPU
CPU check failed

[Andzhig]

why should you -v replace with -D 0:0 or -D 1:0

Intel(R) HD Graphics 4600

it seems like you're running on a CPU card I do not know if it works fine.

[Yahkinator]

why should you -v replace with -D 0:0 or -D 1:0

Intel(R) HD Graphics 4600

it seems like you're running on a CPU card I do not know if it works fine.

It's an integrated video card.  It won't be the final machine I'll be using...just testing.

@holy_ship do you have an opinion?