Built new rig GPu's not overclocking or using full performance.

[MylesRow]

Hi everyone.

Apologies for the limited knowledge if I say anything that sounds stupid.
So within the last week a friend of mine has invested in 2 rigs and has paid someone to build them for her. Each rig has 6 1080ti's that are overclocked and running at 1800MHz according to msi according to MSI after burner. The problem is on task manager every gpu comes up as being used at 0% apart from GPU 0 which uses anyway between 1-7%
So from 6 1080ti's overclocked the daily estimated sits at around 12USD which quite frankly doesnt seem correct, I can post pictures and try to reply to every message to help fix this problem as fast as possible, thank you

[1715536494]

1715536494

[1715536494]

1715536494

[1715536494]

1715536494

[1715536494]

1715536494

[1715536494]

1715536494

[theodrim]

The problem is on task manager every gpu comes up as being used at 0% apart from GPU 0 which uses anyway between 1-7%

Unless you looking at compute load (in task manager) you won't see anything when mining.
Which algo/miner software are you using? Did you check usage in other utilities (gpuz, hwinfo, even afterburner)?

So from 6 1080ti's overclocked the daily estimated sits at around 12USD which quite frankly doesnt seem correct

Again, without info on what coin you are mining no estimate can be drawn.

[MylesRow]

Oh sorry forgot to mention, equihash and as we speak its sitting at 3.4 KH/s

[Alibatant]

Oh sorry forgot to mention, equihash and as we speak its sitting at 3.4 KH/s

So that is about 560H/s each. It is slow. If you use 100% TDP, should be 750 or over.

[MylesRow]

How do I increase each card to TDP 100%

[crypticj]

How do I increase each card to TDP 100%

every card by default is at 100% TDP

you need msi afterburner or similar utility to fine tune your TDP/overclock etc.