hack4love (OP)
Newbie
Offline
Activity: 152
Merit: 0
|
|
March 26, 2018, 09:12:32 PM |
|
my rig 7 rx560
2pus
850 seasonic bronze
650 seasonic gold
i plug the mB and the 7 x risers and 4 gpu in to 850 pus
i plug the 7 riser in to 850 pus
3 in single sata cable and other 3 in other sata cable and one in sata cable
i use 6 pin riser
and other 3 gpus plug to 650 pus
|
|
|
|
minfet
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 26, 2018, 09:19:39 PM |
|
it could cause you issues, try to connect max 2 risers per cable
|
|
|
|
hack4love (OP)
Newbie
Offline
Activity: 152
Merit: 0
|
|
March 26, 2018, 09:23:48 PM |
|
issues like what
|
|
|
|
EricJH801
Jr. Member
Offline
Activity: 210
Merit: 1
|
|
March 26, 2018, 09:29:11 PM |
|
The main issue would be they overheat and start on fire. I agree with previous poster, no more than 2 per chain and 1 if possible. issues like what
|
|
|
|
fanatic26
|
|
March 26, 2018, 09:32:19 PM |
|
it could cause you issues, try to connect max 2 risers per cable
Remember on a Sata connector there is only a single 20-18 AWG wire actually providing 12v. You should do what the person I quoted said and just run 2 per cable run. I have hundreds of miners runnning 2 per with no issues whatsoever, if you bump that up to 3 you will eventually have fires/failures/sadness of some sort.
|
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
smoolae
|
|
March 26, 2018, 09:33:48 PM |
|
my rig 7 rx560
2pus
850 seasonic bronze
650 seasonic gold
i plug the mB and the 7 x risers and 4 gpu in to 850 pus
i plug the 7 riser in to 850 pus
3 in single sata cable and other 3 in other sata cable and one in sata cable
i use 6 pin riser
and other 3 gpus plug to 650 pus
Please do not!Not my rig
|
|
|
|
Dlikrot
|
|
March 26, 2018, 09:35:45 PM |
|
Melted connector, short circuit, fire etc Only 1 sata riser on each cable. Buy risers with gpu/pcie molex connector or what it’s called. Add second power supply with breakout board (with 12v in so both start at same time. Cable riser and gpu with separate cables from psu. Riser and gpu must always get power from the same psu. Go pro and safe. Don’t cheap out.
|
BTC and KFC
|
|
|
hack4love (OP)
Newbie
Offline
Activity: 152
Merit: 0
|
|
March 26, 2018, 09:42:20 PM |
|
i have only 5 sata cable how i run 1 sata 1 riser
|
|
|
|
dhouse
Jr. Member
Offline
Activity: 266
Merit: 2
|
|
March 26, 2018, 09:55:18 PM |
|
Melted connector, short circuit, fire etc Only 1 sata riser on each cable. Buy risers with gpu/pcie molex connector or what it’s called. Add second power supply with breakout board (with 12v in so both start at same time. Cable riser and gpu with separate cables from psu. Riser and gpu must always get power from the same psu. Go pro and safe. Don’t cheap out. this
|
|
|
|
Johny101010
|
|
March 26, 2018, 09:55:51 PM |
|
As long as you liquid cool that sata cable you should be fine.
|
|
|
|
hack4love (OP)
Newbie
Offline
Activity: 152
Merit: 0
|
|
March 26, 2018, 10:04:12 PM |
|
i mix the sata cables from two pus now
2 2 1 1 1
|
|
|
|
hack4love (OP)
Newbie
Offline
Activity: 152
Merit: 0
|
|
March 26, 2018, 10:07:26 PM |
|
As long as you liquid cool that sata cable you should be fine.
the sata plug was cold the cable was A little bit worm
|
|
|
|
BCCrypto68
Newbie
Offline
Activity: 27
Merit: 0
|
|
March 26, 2018, 10:07:48 PM |
|
Going to have to confirm the no. I did it without much thought or foresight - melted the end of the sata cable that went into my PSU - so the cable and the port on the PSU are now no longer usable. I got lucky that's all that happened.
|
|
|
|
AlecMe
|
|
March 26, 2018, 10:17:33 PM |
|
my rig 7 rx560
2pus
850 seasonic bronze
650 seasonic gold
i plug the mB and the 7 x risers and 4 gpu in to 850 pus
i plug the 7 riser in to 850 pus
3 in single sata cable and other 3 in other sata cable and one in sata cable
i use 6 pin riser
and other 3 gpus plug to 650 pus
Please do not!Not my rig Just wow. I have changed mine NOW ! Thank you
|
|
|
|
gsrcrxsi314
Member
Offline
Activity: 367
Merit: 34
|
|
March 26, 2018, 10:55:50 PM |
|
Meh. Been running 4 Sata risers per PSU cable for months now. No problems.
8 GPUs (Rx 500) 8 V006c risers 8 SATA to 6-pin adapters 2 PSU SATA chains (4 per) 1 1200w plat PSU with metal barrel connectors
It’s fine.
|
|
|
|
|
abhiseshakana
Legendary
Offline
Activity: 2268
Merit: 2256
From Zero to 2 times Self-Made Legendary
|
|
March 27, 2018, 01:56:50 AM Last edit: March 29, 2019, 07:06:55 PM by abhiseshakana |
|
Judging from my experience, the sata cable that is melted or burned is always the sata cable from the riser. So it would be fine to put 3 riser on a single sata Line (single rail PSU), if you have a good quality sata cable for a riser such as built-in sata cable from PSU (Original 18AWG Cable with a better socket).
|
| | | . .Duelbits. | | | █▀▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄▄ | TRY OUR
NEW UNIQUE GAMES! | | . ..DICE... | ███████████████████████████████ ███▀▀ ▀▀███ ███ ▄▄▄▄ ▄▄▄▄ ███ ███ ██████ ██████ ███ ███ ▀████▀ ▀████▀ ███ ███ ███ ███ ███ ███ ███ ███ ▄████▄ ▄████▄ ███ ███ ██████ ██████ ███ ███ ▀▀▀▀ ▀▀▀▀ ███ ███▄▄ ▄▄███ ███████████████████████████████ | . .MINES. | ███████████████████████████████ ████████████████████████▄▀▄████ ██████████████▀▄▄▄▀█████▄▀▄████ ████████████▀ █████▄▀████ █████ ██████████ █████▄▀▀▄██████ ███████▀ ▀████████████ █████▀ ▀██████████ █████ ██████████ ████▌ ▐█████████ █████ ██████████ ██████▄ ▄███████████ ████████▄▄ ▄▄█████████████ ███████████████████████████████ | . .PLINKO. | ███████████████████████████████ █████████▀▀▀ ▀▀▀█████████ ██████▀ ▄▄███ ███ ▀██████ █████ ▄▀▀ █████ ████ ▀ ████ ███ ███ ███ ███ ███ ███ ████ ████ █████ █████ ██████▄ ▄██████ █████████▄▄▄ ▄▄▄█████████ ███████████████████████████████ | 10,000x MULTIPLIER | │ | NEARLY UP TO .50%. REWARDS | | | ▀▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄▄█ |
|
|
|
bucketofsocks
Member
Offline
Activity: 83
Merit: 11
|
|
March 27, 2018, 02:00:54 AM |
|
I had a sata cable burn up with only 2 risers connected on an older cooler master M2 1000w
all depends on the power draw and the quality of the cables, that one lasted a few months before letting the factory smoke out
|
|
|
|
hack4love (OP)
Newbie
Offline
Activity: 152
Merit: 0
|
|
March 27, 2018, 08:22:52 AM |
|
I had a sata cable burn up with only 2 risers connected on an older cooler master M2 1000w
all depends on the power draw and the quality of the cables, that one lasted a few months before letting the factory smoke out
Yes this must happened to you coz cooler master is a shity company
|
|
|
|
Piskeante
Member
Offline
Activity: 924
Merit: 15
|
|
March 27, 2018, 08:57:32 AM |
|
max 1 riser per sata cable.
Why? because risers can use up to 75W. But a cable of SATA can only provide up to 56W more or less.
If you have normal cards, one riser per sata cable is just fine. two i wouldn't recomend it (the cable will get hot, really hot). If you have RX VEGA or 1080 or 1080ti mining with overclock, than SATA cable is a no go.
so it is safe 3 risers??? NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
|
BTC no more than 6k by end of 2019. ETH no more than 300$ by end 2019. Huge market manipulation, huge amount of scammers and hypers.
|
|
|
|