yorchi5m (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 08, 2018, 10:13:49 PM |
|
HI MY name is Jorge and I'm new into mining, I been mining for about a month now and been doing it so with nice hash, I believe on ethereum and want to min it, but I been running to some issues, I started using mining pool hub but run into some security issues, like OPT key that I never save =\. 1. So I started to mine with ethermine running Claymore's miner, checking my stats on the website, I was able to see my hash rates, earnings etc, one day, it show my worked offline, and try upgrading the IP address and my worker came back online, a few hours latter return to find my worker offline, and when I updated the IP address it replay with a message of invalid IP address, and now Every time I try to connect my rig running claymore's, it show my hash rate, temp, and everything else on the mining program but in the website is offline. 2. Running into those issues, I started using nano pool, same story it was running fine, after a while my worker show offline in nano pool website, but in the program is still mining, and don't know hot to bring it back online, so I stop mining ethereum and continue mining with nicehash. Has anyone else experience the same issues, I'm I missing anything?
|
|
|
|
Geraldo
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 09, 2018, 04:57:39 AM |
|
I don't get it, what you mean with upgrading IP address?That what you mean IP address on the Ethermine setting section? If it yes, it doesn't relate to your pool worker going off. That setting (public IP) related to securing your pool account, just it. If you get a message saying that " invalid IP address". Try to point your rig to that pool (Ethermine) at least until one share, then check your public IP through https://whatismyipaddress.com/ or something else, then put it on Ethermine settings section. Technically, when your mining software (in your case, Claymore) showing hashes then giving a valid share to the pool, mining pool must be showing your mining stat (Ethermine, Nanopool). I have no idea with your case. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
|
leonix007
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1008
Merit: 297
Grow with community
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 09, 2018, 05:32:46 AM |
|
HI MY name is Jorge and I'm new into mining, I been mining for about a month now and been doing it so with nice hash, I believe on ethereum and want to min it, but I been running to some issues, I started using mining pool hub but run into some security issues, like OPT key that I never save =\. 1. So I started to mine with ethermine running Claymore's miner, checking my stats on the website, I was able to see my hash rates, earnings etc, one day, it show my worked offline, and try upgrading the IP address and my worker came back online, a few hours latter return to find my worker offline, and when I updated the IP address it replay with a message of invalid IP address, and now Every time I try to connect my rig running claymore's, it show my hash rate, temp, and everything else on the mining program but in the website is offline. Are you sure you are looking at the correct eth wallet? you can check what has been define in Claymore's config, my assumptions is that after it goes offline, your configs are pointed at different ETH wallet. 2. Running into those issues, I started using nano pool, same story it was running fine, after a while my worker show offline in nano pool website, but in the program is still mining, and don't know hot to bring it back online, so I stop mining ethereum and continue mining with nicehash. Has anyone else experience the same issues, I'm I missing anything?
same as the above, check your ETH wallet if not changed
|
|
|
|
ivakar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 09, 2018, 06:06:49 AM |
|
Dude, your IP address has nothing to do with the problems of your miner, IP address is needed if you want to configure payments amounts or time when payments will be proceed on the pool side. but pool knows and recognize you through your ETH address which you save in the bat file for claymor miner
|
|
|
|
Geraldo
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 09, 2018, 06:41:09 AM |
|
Are you sure you are looking at the correct eth wallet? you can check what has been define in Claymore's config, my assumptions is that after it goes offline, your configs are pointed at different ETH wallet.
OP said, was able to see mining status in the pool, before. But then, when OP's worker goes off, even after connected again, OP can't see mining stat on the pool. (that's what I get) Seem like not a wallet address issue, except OP changes the address itself. Or maybe changed itself, like you said, but can it be? OP- did you know how to check your mining stat through your wallet address? Use the same wallet address in the bat file. Maybe you need to double check your wallet address like leonix said. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
yorchi5m (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 09, 2018, 03:38:36 PM |
|
I checked my wallet address and is the same one (exodus) I been using since I start it mining, nothing have change. this is the configuration I'm running on claymore.
POOL: eth-us-east1.nanopool.org:9999, WALLET: 0x97b10ccc19bf63c1e72333557ef7895f24723e26.rig1/gdljorgecrypto@outlook.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
I got this configuration from nano pool, but still after a few hours my stats still not show in their website, am I missing anything in there?
|
|
|
|
swogerino
Legendary
Offline
Activity: 3262
Merit: 1244
Top Crypto Casino
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 09, 2018, 03:44:48 PM |
|
I checked my wallet address and is the same one (exodus) I been using since I start it mining, nothing have change. this is the configuration I'm running on claymore.
POOL: eth-us-east1.nanopool.org:9999, WALLET: 0x97b10ccc19bf63c1e72333557ef7895f24723e26.rig1/gdljorgecrypto@outlook.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
I got this configuration from nano pool, but still after a few hours my stats still not show in their website, am I missing anything in there?
I mine in Ethermine.org which is the same as Nanopool, you can try to switch to that pool just to see if things will change. Just change the address of the pool with the ethermine one. Maybe the reason is that nanopool is not synchronizing in time your worker stats, this have happened a few times also in Ethermine but lately I have been having no problems mining on ethermine. If the same happens then it must be some problem with your internet connection stability.
|
|
|
|
vikstar1000
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 09, 2018, 03:47:42 PM |
|
I also find this with some of the pools especially nanopool. Your workers do show offline for some reason but they are still mining. Its always goes on and off. if you not losing any mining I would not worry about it. I now use https://ethermine.org. thanks
|
|
|
|
yorchi5m (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 09, 2018, 07:10:29 PM |
|
I checked my wallet address and is the same one (exodus) I been using since I start it mining, nothing have change. this is the configuration I'm running on claymore.
POOL: eth-us-east1.nanopool.org:9999, WALLET: 0x97b10ccc19bf63c1e72333557ef7895f24723e26.rig1/gdljorgecrypto@outlook.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
I got this configuration from nano pool, but still after a few hours my stats still not show in their website, am I missing anything in there?
I mine in Ethermine.org which is the same as Nanopool, you can try to switch to that pool just to see if things will change. Just change the address of the pool with the ethermine one. Maybe the reason is that nanopool is not synchronizing in time your worker stats, this have happened a few times also in Ethermine but lately I have been having no problems mining on ethermine. If the same happens then it must be some problem with your internet connection stability. my apologies, this config is the one I was using on nano pool: POOL: eth-us-east1.nanopool.org:9999, WALLET: 0x97b10ccc19bf63c1e72333557ef7895f24723e26.rig1/gdljorgecrypto@outlook.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 and this is for ethermine: # POOL: us1.ethermine.org:4444, WALLET: 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr, PSW: x, ESM: 1, ALLPOOLS: 0 as far as I know this is all I need on the config, but still can't see any stats on ether miner or nano pool, aslo I had the similar problem in super nova cc, run Claymores dual miner ETH/DCR and the program seem to work fine, yet again in supernova website, I have no balance or earnings, while on ethermine and nano pool I do. any advice to a possible solution will be gladly appreciated. Mining ethereum has proven complicated to me, I'm sure I missing out some simple that a newbie has miss out
|
|
|
|
|
yorchi5m (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 10, 2018, 05:17:52 AM |
|
AYE, I deleted my old claymore software and reinstall it and I got connection for now, I haven't try nano pool yet, and I also try dual mining with supernova and till got nothing, I'm gonna let it mine some more ethereum thanks to you all for your help! has anyone else experience problems with dual mining ETH & DRC with claymore dual miner?
|
|
|
|
yorchi5m (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 10, 2018, 05:37:51 PM |
|
my apologies, this config is the one I was using on nano pool:
POOL: eth-us-east1.nanopool.org:9999, WALLET: 0x97b10ccc19bf63c1e72333557ef7895f24723e26.rig1/gdljorgecrypto@outlook.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
and this is for ethermine:
# POOL: us1.ethermine.org:4444, WALLET: 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr, PSW: x, ESM: 1, ALLPOOLS: 0
So, you are using pool config, would be better if you were using (bat) file. But first, need to explain a bit info about pool config on Claymore. This sign in front of config (#) means that config wouldn't read by apps (inactive). Since I suggest you using (bat) file, so give that sign in the front of your pool config (in your case e-pool), so that config wouldn't be active. Creating (bat) file. On Claymore folder, find default (bat) file named start, right click then pick edit, your default text editor will appear, mostly using notepad. Then replace whatever on those text editor with this. (I only gave you simple bat file, you can learn how to use another parameter). Single miningETH (Ethermine)EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr -epsw x ETH (Nanopool)EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr -epsw x Dual MiningAnd when you want to try Dual Mining. Let's say you are doing dual mining ETH and DCR (ETH Ethermine - DCR Suprnova). Then your simple (bat) file would be like this. EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal yorchi6mr.1 -dpsw x I assume yorchi6mr is your Suprnova username, and you have created pool worker on Suprnova with this detail. worker: yorchi6mr.1 Password: x You can create worker on Suprnova pool in My Account section, then pick My Workers. Edit: Forget, you can double click that (bat) file to starting mining process. Hi! thanks Geraldo for your replay, I honestly don't know what my issue was, I change the file -epool and dpool, created a new start file with different configurations, and that is when I started to have problems, so I deleted the hole claymore's file and reinstalled and now im mining ehtereum on ehtermine, I will try the config code for dual mining, I have not been able to make that one work... yes my user name is yorchi6m, rig1 (worker) 1.- Now this code I assume is gonna go into the -epool text, right? EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal yorchi6mr.1 -dpsw x 2.- now is it like this? A) EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal yorchi6mr.1 -dpsw x B) us1.ethermine.org:4444 -ewal 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal yorchi6mr.1 -dpsw x
|
|
|
|
Geraldo
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2018, 03:56:15 AM |
|
Now this code I assume is gonna go into the -epool text, right?
Nop, that code must be applied to file named start (bat file). Located in Claymore folder (same as epool/dpool text) the last one in below. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FXvXbg8A.jpg&t=665&c=ExxPq_Lt8HJChg)
yes my user name is yorchi6m, rig1 (worker)
Your code for dual-mining must be:EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal yorchi6mr.rig1 -dpsw x
|
|
|
|
yorchi5m (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2018, 07:52:25 AM |
|
Now this code I assume is gonna go into the -epool text, right?
Nop, that code must be applied to file named start (bat file). Located in Claymore folder (same as epool/dpool text) the last one in below. https://i.imgur.com/XvXbg8A.jpg
yes my user name is yorchi6m, rig1 (worker)
Your code for dual-mining must be:EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x97b10ccc19bf63c1e72333557ef7895f24723e26.yorchi6mr -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal yorchi6mr.rig1 -dpsw x Thanks so much Geraldo, as of now 12.46 am I copy/paste the code into the very last start bat file like you suggested, is working in the mining program, I"m getting ETH&&DCR hash speeds etc, I'm getting stats in ethermine, I just log in on super nova cc, I haven't got nothing yet, I'm gonna let it run for the night and see if is mining DCR
|
|
|
|
yorchi5m (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2018, 08:01:51 AM |
|
PS!!! how do I post pics here? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) I want to post some screenshots I have questions on after I start it claymore it show me a message that goes like this ETH: authorized (green color) DCR: authorization failed (red color) : (null) (red color) DCR 04/11/18-00 share found (green) DCR: share rejected (red color) any idea what is happening ?
|
|
|
|
yorchi5m (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 03:55:22 AM |
|
https://dcr.suprnova.cc/index.php?page=dashboard this is what I see after running claymore dual miner for a few hours, ethermine is wotking just fine, I copy the code Geraldo post above on the start bat file...
|
|
|
|
Geraldo
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 06:22:55 AM |
|
That's your dashboard, and people wouldn't be able to see it (need to log in). You can use pics to show us what happens to your DCR at Suprnova. That bat file code (that I write above) just an example, you can change it according to your needs.
|
|
|
|
yorchi5m (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 06:41:20 AM |
|
That's your dashboard, and people wouldn't be able to see it (need to log in). You can use pics to show us what happens to your DCR at Suprnova. That bat file code (that I write above) just an example, you can change it according to your needs. I have not figure out how to upload pics into the forum... I did change the code a few times, editing the worker but I still get nothing from supernova, Geraldo, do you know where to contact super nova? I went into contact section on their website and send 3 emails regarding this issue, no answer from them yet, I'm wonder if there is another way to contact them?
|
|
|
|
Geraldo
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 07:12:10 AM |
|
I have not figure out how to upload pics into the forum...
I did change the code a few times, editing the worker but I still get nothing from supernova, Geraldo, do you know where to contact super nova? I went into contact section on their website and send 3 emails regarding this issue, no answer from them yet, I'm wonder if there is another way to contact them?
Oh yeah, user under member-rank can't do it except you are copper member. You can upload your pics then copy link to that pics on your post. Tbh, we can help you with more info that you need to gave us. But would be better you can explore it by yourself. So, next time you troubled, you can handle it. Trust me, you can do it. do you know where to contact super nova? You can contact ocminerhttps://bitcointalk.org/index.php?action=profile;u=43526
|
|
|
|
claymore008
Jr. Member
Offline
Activity: 177
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2018, 08:53:29 AM |
|
if you want to use SSL on ethermine pool with claymore miner, use port 5555 and place "stratum+ssl://eu1.ethermine.org" in front of your comand line.
|
|
|
|
|