yaya79
Newbie
Offline
Activity: 6
Merit: 0
|
|
July 01, 2018, 09:59:08 PM |
|
|
|
|
|
Bucheran
Newbie
Offline
Activity: 11
Merit: 0
|
|
July 01, 2018, 11:25:26 PM |
|
|
|
|
|
400acres
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 02, 2018, 12:05:26 AM |
|
Is there a monitoring port in TDXMiner so I can monitor hash/production in awesome miner?
|
|
|
|
gumso
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 02, 2018, 04:42:20 AM |
|
Fist of all i should thank the dev for making the vega very profitable again Here is what i did 6x Vega 56 (MSI Airboost OC) Asus B250 Mining Expert Mobo with PCI-E 1x risers and Gen3 in BIOS 1. Freshly Installed Ubuntu 16.04 Desktop ( http://releases.ubuntu.com/16.04/) 2. Followed the ROCM AMD Driver Installation ( https://github.com/RadeonOpenCompute/ROCm) Created a Fan Control Script (amd-fan.sh) #!/bin/bash /opt/rocm/bin/rocm-smi -d 0 --setfan 150 /opt/rocm/bin/rocm-smi -d 1 --setfan 150 /opt/rocm/bin/rocm-smi -d 2 --setfan 150 /opt/rocm/bin/rocm-smi -d 3 --setfan 150 /opt/rocm/bin/rocm-smi -d 4 --setfan 150 /opt/rocm/bin/rocm-smi -d 5 --setfan 150 exit 0 No other Overclocking as it does not improve my hashrate but the Power consumption but with the stock settings and fan limit each card is consuming 150W so total 900W https://imgur.com/xzGT0SkAt present getting 35Mhs and miner is very stable, actually impressed with it https://imgur.com/B6XQGK1Will play with OCs soon and update I must say Vega is pretty stable on linux, i have been mining Haven, Loki on windows and i know how hard to keep watching the miner crash, thanks a lot Dev @todxx Hi Victor, thanks for sharing, using your guide here i got my rig working after a few tweaks. Did you have any luck with OCs?
|
|
|
|
artful
Newbie
Offline
Activity: 59
Merit: 0
|
|
July 02, 2018, 09:08:43 AM |
|
i have rx580 and vegafe in one case ==================== ROCm System Management Interface ==================== ================================================================================ GPU Temp AvgPwr SCLK MCLK Fan Perf SCLK OD 1 25.0c 33.166W 300Mhz 300Mhz 56.86% auto 0% 0 69.0c 219.0W 1440Mhz 945Mhz 14.9% auto 0% ================================================================================ ==================== End of ROCm SMI Log ====================
root@free:/opt/tdxminer# ./tdxminer -a lyra2z -o stratum+tcp://lyra2z.eu.nicehash.com:3365 -u 3LHhV4w59LbXNFJrmTSyzBVW6iUC7dAjTv.aaa -d 3 tdxminer version 0.2.2.2 This is a beta release and may be unstable on some hardware. [2018-07-02 12:02:39] Device number 3 is out of range. root@free:/opt/tdxminer# ./tdxminer -a lyra2z -o stratum+tcp://lyra2z.eu.nicehash.com:3365 -u 3LHhV4w59LbXNFJrmTSyzBVW6iUC7dAjTv.aaa -d 2 tdxminer version 0.2.2.2 This is a beta release and may be unstable on some hardware. [2018-07-02 12:02:40] Device number 2 is out of range. root@free:/opt/tdxminer# ./tdxminer -a lyra2z -o stratum+tcp://lyra2z.eu.nicehash.com:3365 -u 3LHhV4w59LbXNFJrmTSyzBVW6iUC7dAjTv.aaa -d 1 tdxminer version 0.2.2.2 This is a beta release and may be unstable on some hardware. [2018-07-02 12:02:41] Device number 1 is out of range. root@free:/opt/tdxminer# ./tdxminer -a lyra2z -o stratum+tcp://lyra2z.eu.nicehash.com:3365 -u 3LHhV4w59LbXNFJrmTSyzBVW6iUC7dAjTv.aaa -d 0 tdxminer version 0.2.2.2 This is a beta release and may be unstable on some hardware. [2018-07-02 12:02:42] Successfully initialized GPU 0: Vega with 64 CU [2018-07-02 12:02:42] Pool lyra2z.eu.nicehash.com successfully subscribed.
the miner does not see RX580 whitch ROCm 1.8.1
|
|
|
|
|
SimpleM
Newbie
Offline
Activity: 11
Merit: 0
|
|
July 02, 2018, 08:56:52 PM |
|
i have rx580 and vegafe in one case ==================== ROCm System Management Interface ==================== ================================================================================ GPU Temp AvgPwr SCLK MCLK Fan Perf SCLK OD 1 25.0c 33.166W 300Mhz 300Mhz 56.86% auto 0% 0 69.0c 219.0W 1440Mhz 945Mhz 14.9% auto 0% ================================================================================ ==================== End of ROCm SMI Log ====================
root@free:/opt/tdxminer# ./tdxminer -a lyra2z -o stratum+tcp://lyra2z.eu.nicehash.com:3365 -u 3LHhV4w59LbXNFJrmTSyzBVW6iUC7dAjTv.aaa -d 3 tdxminer version 0.2.2.2 This is a beta release and may be unstable on some hardware. [2018-07-02 12:02:39] Device number 3 is out of range. root@free:/opt/tdxminer# ./tdxminer -a lyra2z -o stratum+tcp://lyra2z.eu.nicehash.com:3365 -u 3LHhV4w59LbXNFJrmTSyzBVW6iUC7dAjTv.aaa -d 2 tdxminer version 0.2.2.2 This is a beta release and may be unstable on some hardware. [2018-07-02 12:02:40] Device number 2 is out of range. root@free:/opt/tdxminer# ./tdxminer -a lyra2z -o stratum+tcp://lyra2z.eu.nicehash.com:3365 -u 3LHhV4w59LbXNFJrmTSyzBVW6iUC7dAjTv.aaa -d 1 tdxminer version 0.2.2.2 This is a beta release and may be unstable on some hardware. [2018-07-02 12:02:41] Device number 1 is out of range. root@free:/opt/tdxminer# ./tdxminer -a lyra2z -o stratum+tcp://lyra2z.eu.nicehash.com:3365 -u 3LHhV4w59LbXNFJrmTSyzBVW6iUC7dAjTv.aaa -d 0 tdxminer version 0.2.2.2 This is a beta release and may be unstable on some hardware. [2018-07-02 12:02:42] Successfully initialized GPU 0: Vega with 64 CU [2018-07-02 12:02:42] Pool lyra2z.eu.nicehash.com successfully subscribed.
the miner does not see RX580 whitch ROCm 1.8.1 prefix your miner like this and try again: root@free:/opt/tdxminer# HSA_ENABLE_SDMA=0 ./tdxminer -a lyra2z -o stratum+tcp://lyra2z......
|
|
|
|
Bakchiadai
Newbie
Offline
Activity: 6
Merit: 0
|
|
July 03, 2018, 10:43:48 AM |
|
Guys, how much is a fee for this miner?
I am mining gin on bsod and get around 1 coin from 33MH, however, I am supposed to get around 1.4. So, is the fee here so high or bsod stealing part of mining?
Author says about 3% devfee In real life your estimated earnings will be lower around 20% of what you expect by calculator Confirmed, my shares are roughly 25% lower than expected, I took 3 days of almost non-interrupted mining (few hours downtime on one of my 4 rigs). Results are as follows: Rig 1: 12x MSI Gaming X 570 - reported hashrate 39 mh/s (HiveOS) Rig 2: 8x Sapphire Nitro 570 - reported hashrate 24.5 mh/s (EthOS) Rig 3: 6x mixed Rx 480 -reported hashrate 19.2 mh/s (HiveOS) Rig 4: 6x Radeon Vega 64 - reported hashrate 35 mh/s (ubuntu 16.04, 4 hours downtime) Total Hashrate, 117,5 mh/s, let's say my average was 110 mh/s, then the calc says I should have earned 4.6 GIN. Here are my results from Angrypool. https://imgur.com/d7PZbPg - Hashrate reported by Angrypool, pretty much inline with my miners' reported hashrates https://imgur.com/kAUH6Zt - Payout of 3.6 GIN which is ~27% under the expected 4.6 GIN...and the difficulty has GONE UP over the last 24 hours. I don't have rejected shares and when I mine ETH or XMR I am usually only 3-4% under the calculator's predictions. The same happened over the last 3 days, considering that Angrypool has a fee of only 0.5% I think its pretty much confirmed, the calculator is wrong and miners are being drawn to the network by inaccurate profit predictions. Making it a lose-lose situation for all of us.
|
|
|
|
MountainMining
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 03, 2018, 04:45:47 PM |
|
Guys, how much is a fee for this miner?
I am mining gin on bsod and get around 1 coin from 33MH, however, I am supposed to get around 1.4. So, is the fee here so high or bsod stealing part of mining?
Author says about 3% devfee In real life your estimated earnings will be lower around 20% of what you expect by calculator Confirmed, my shares are roughly 25% lower than expected, I took 3 days of almost non-interrupted mining (few hours downtime on one of my 4 rigs). Results are as follows: Rig 1: 12x MSI Gaming X 570 - reported hashrate 39 mh/s (HiveOS) Rig 2: 8x Sapphire Nitro 570 - reported hashrate 24.5 mh/s (EthOS) Rig 3: 6x mixed Rx 480 -reported hashrate 19.2 mh/s (HiveOS) Rig 4: 6x Radeon Vega 64 - reported hashrate 35 mh/s (ubuntu 16.04, 4 hours downtime) Total Hashrate, 117,5 mh/s, let's say my average was 110 mh/s, then the calc says I should have earned 4.6 GIN. Here are my results from Angrypool. https://imgur.com/d7PZbPg - Hashrate reported by Angrypool, pretty much inline with my miners' reported hashrates https://imgur.com/kAUH6Zt - Payout of 3.6 GIN which is ~27% under the expected 4.6 GIN...and the difficulty has GONE UP over the last 24 hours. I don't have rejected shares and when I mine ETH or XMR I am usually only 3-4% under the calculator's predictions. The same happened over the last 3 days, considering that Angrypool has a fee of only 0.5% I think its pretty much confirmed, the calculator is wrong and miners are being drawn to the network by inaccurate profit predictions. Making it a lose-lose situation for all of us. Has anyone figured out what is causing this problem? I have five rigs with mostly Sapphire RX 580s. I am using tdxminer, integrated with HiveOS, to mine two different coins on two separate pools. I am not earning anything close to what the calculators estimated. Is there a problem with the Lyra2z algo?
|
|
|
|
PKBO
Newbie
Offline
Activity: 118
Merit: 0
|
|
July 03, 2018, 09:45:16 PM |
|
No, there is no problem, you just mining small shitcoins with low market cap + low hashrate, whitch is really really unpredictable and volatile to calculate earnings... Becouse once it will show nice profit, all miners jump into it and dificulty goes higher...
You need to understand that only 0,01 % of all GPUS mining lyra2z, so even little higher number of active miners mean really big impact into earnings.
|
|
|
|
Anthony42
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 04, 2018, 02:52:11 AM |
|
confirm, the problem is on lyra2z. On phi2 or any other algorithm 3-4% deviation with calculators but not 27%... And about the fact that the calculators specifically do it - it's not exactly, just the Lira was apparently not designed for such a power network, and now there is an error in the calculation of complexity.... Generally when podseti arrived at лиpe2з necessary from the final profit take 27%
|
|
|
|
squallw
|
|
July 04, 2018, 05:37:26 AM Last edit: July 04, 2018, 05:54:33 AM by squallw |
|
I tested bsod and got arount -30% reward. So i decided to change to another one, i tested angry pool, for some hours the reward was good, but in 24h reward was -40% that calc says. Finally i tested https://www.pickaxe.pro and got arount +50% in the first 24h(maybe lucky), but average in 1 week is more than the calc says for me. Today was a bad day because the pool hash rate wasn't good.
|
|
|
|
zientarski
Newbie
Offline
Activity: 8
Merit: 0
|
|
July 04, 2018, 04:10:59 PM |
|
Do you know if there exist Linux scrypt which could connect wit Awesome Miner API and based on recieved information start predefinied software with recieved programable parameters.
I am thinking about tdxminer pool/coin switch based on Awsom Miner or any other profit switch program.
Awesome Miner support API with sgminer and ccminer so it should be possible to make this kind of script. This could be profitable to change coins/pools.
Ideally if tdxminer could have API which allow pool/coin switch.
|
|
|
|
professorkuusamo
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 04, 2018, 06:10:10 PM |
|
confirm, the problem is on lyra2z. On phi2 or any other algorithm 3-4% deviation with calculators but not 27%... And about the fact that the calculators specifically do it - it's not exactly, just the Lira was apparently not designed for such a power network, and now there is an error in the calculation of complexity.... Generally when podseti arrived at лиpe2з necessary from the final profit take 27% мyткo cтaйл
|
|
|
|
oup59
|
|
July 04, 2018, 06:31:11 PM |
|
Rig 1: 12x MSI Gaming X 570 - reported hashrate 39 mh/s (HiveOS)
Hi, Do you apply core and mem OC/DC along with voltage settings (if applicaple for AMD in HiveOS) via HiveOS or mod gpu bios and just run in HiveOS? Would you care to share your gpu,mem and voltage values to get 3.25 mh/s per RX 570? NEver used HiveOS before but I prepared an HiveOS USB integrated with TDXMiner but did not try yet. Plan to do this weekend when I get close to my rig. Thanks.
|
|
|
|
LapayN
Newbie
Offline
Activity: 18
Merit: 0
|
|
July 04, 2018, 08:59:29 PM |
|
How has rate in nvdiai 1080ti?
|
|
|
|
deksa
Newbie
Offline
Activity: 94
Merit: 0
|
|
July 05, 2018, 04:52:18 AM |
|
Please share some OC settings for RX 580 8gb. Do I need to bios mod it or what? Using HiveOS and getting 1.6 mh/s only. Any way to OC via the terminal? Thanks!
|
|
|
|
Bakchiadai
Newbie
Offline
Activity: 6
Merit: 0
|
|
July 05, 2018, 10:10:02 AM |
|
Rig 1: 12x MSI Gaming X 570 - reported hashrate 39 mh/s (HiveOS)
Hi, Do you apply core and mem OC/DC along with voltage settings (if applicaple for AMD in HiveOS) via HiveOS or mod gpu bios and just run in HiveOS? Would you care to share your gpu,mem and voltage values to get 3.25 mh/s per RX 570? NEver used HiveOS before but I prepared an HiveOS USB integrated with TDXMiner but did not try yet. Plan to do this weekend when I get close to my rig. Thanks. As requested: https://i.imgur.com/0Lrxgwd.pngActual hashrate on the rig is 38.6 mh/s Oh and referring to my previous post of making less than the calculator says, im now down to under 3 GIN, when I should be getting close to 4.5... absolute bullshit.
|
|
|
|
deksa
Newbie
Offline
Activity: 94
Merit: 0
|
|
July 05, 2018, 11:04:35 AM |
|
Please share some OC settings for RX 580 8gb. Do I need to bios mod it or what? Using HiveOS and getting 1.6 mh/s only. Any way to OC via the terminal? Thanks!
A little update: 3.1 mhs now on default voltage, 1360 core and 1100 memory... I think I can push more, also undervolt. Any suggestion? Thanks!
|
|
|
|
oup59
|
|
July 05, 2018, 05:21:15 PM Last edit: July 05, 2018, 05:39:24 PM by oup59 |
|
Actual hashrate on the rig is 38.6 mh/s Oh and referring to my previous post of making less than the calculator says, im now down to under 3 GIN, when I should be getting close to 4.5... absolute bullshit.
Thanks for the feedback. I checked 4 calculators on Lyraz2 with 111mh/s hash value and values were like 4.5-4.7 GIN per day. Either your real production is way off cuz of sth else (pool issue etc) or the calcs are way off. 3rd option is harsh truth: 111mh/s makes 3ish GIN a day currently. Which pool is that?
|
|
|
|
|