sorry window 7, 64 bit OS
No problem, thought I may have missed the reply.
Let's try this.
1. Unplug your Hub(s) from your system.
2. Remove your Hub(s) and BE's from Device Manager.
3. Shutdown system and restart.
4. Unplug all of your BE's from the Hub(s).
5. After the system restarts and your logged into your desktop plug in the Hub(s).
6. Look in Device Manger and verify the drivers for the hubs got installed OK. If there are any with errors remove them again and rescan for hardware changes.
7. Plug in ONE Block Erupter.
8. If your using CGMiner now run Zadig and make sure it's using WinUSB and install it if necessary. If your using BFGMiner verify that it's a com port or install the VPC driver to make it show up as a com port.
9. Plug in the rest of your erupters and verify they have the correct driver for whichever miner your using.
If that all goes well then start up your miner and give it a minuter or two tor recognize the BE's and pools.