Vince34
Newbie
Offline
Activity: 12
Merit: 0
|
|
June 01, 2018, 10:07:22 AM |
|
Vega 56 : 1460 H/s with SRBMiner (core:1407, mem:945)
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
RyoCurrency
Copper Member
Jr. Member
Offline
Activity: 195
Merit: 1
|
|
June 01, 2018, 04:19:32 PM |
|
reference vega56 - 1350-1370hs per card (1300/950)
|
|
|
|
keksik
Jr. Member
Offline
Activity: 169
Merit: 1
|
|
June 19, 2018, 10:17:07 PM |
|
what is the best miner for rx 580 4/8gb? also what core frequency is recommended? for eth im having 1150mhz/850mV so curious how to increase... basicaly all of mine are able to go for 1360 as based, but not sure what voltage to use? stock is 1150mV but trying to underclock, or better said find the sweet spot..1200 or 1300mhz? and what voltage....ill leave memory as is because it worked for eth stable so dont touch what works there is srb, xmr and claymore i think? anything else? i dont want to play with threads for each card in xmr....
|
|
|
|
keksik
Jr. Member
Offline
Activity: 169
Merit: 1
|
|
June 20, 2018, 09:30:35 AM |
|
GPU0: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 8] GPU1: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 52.0][W: 8][T: 2][K: 1][BUS: 10] GPU2: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 52.0][W: 8][T: 2][K: 1][BUS: 4] GPU3: Radeon RX 570 Series [Ellesmere] [4096 MB][Intensity 53.0][W: 8][T: 1][K: 1][BUS: 13] GPU4: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 12] GPU5: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 14] GPU6: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 15] GPU7: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 11] GPU8: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 1]
[2018-06-20 10:57:12] GPU0 : 761 H/s [T: 59c, RPM: 2298, CC: 1250 MHz, MC: 2050 MHz][BUS:8] [2018-06-20 10:57:12] GPU1 : 1006 H/s [T: 56c, RPM: 2183, CC: 1250 MHz, MC: 2050 MHz][BUS:10] [2018-06-20 10:57:12] GPU2 : 1002 H/s [T: 60c, RPM: 1852, CC: 1250 MHz, MC: 2000 MHz][BUS:4] [2018-06-20 10:57:12] GPU3 : 686 H/s [T: 67c, RPM: 2233, CC: 1250 MHz, MC: 1950 MHz][BUS:13] [2018-06-20 10:57:12] GPU4 : 746 H/s [T: 56c, RPM: 1786, CC: 1250 MHz, MC: 2000 MHz][BUS:12] [2018-06-20 10:57:12] GPU5 : 746 H/s [T: 60c, RPM: 2156, CC: 1250 MHz, MC: 2000 MHz][BUS:14] [2018-06-20 10:57:12] GPU6 : 746 H/s [T: 61c, RPM: 2173, CC: 1250 MHz, MC: 2000 MHz][BUS:15] [2018-06-20 10:57:12] GPU7 : 757 H/s [T: 60c, RPM: 1260, CC: 1250 MHz, MC: 2150 MHz][BUS:11] [2018-06-20 10:57:12] GPU8 : 764 H/s [T: 58c, RPM: 1364, CC: 1250 MHz, MC: 2050 MHz][BUS:1]
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
June 20, 2018, 09:43:13 AM |
|
what is the best miner for rx 580 4/8gb? also what core frequency is recommended? for eth im having 1150mhz/850mV so curious how to increase... basicaly all of mine are able to go for 1360 as based, but not sure what voltage to use? stock is 1150mV but trying to underclock, or better said find the sweet spot..1200 or 1300mhz? and what voltage....ill leave memory as is because it worked for eth stable so dont touch what works there is srb, xmr and claymore i think? anything else? i dont want to play with threads for each card in xmr.... It depends on your GPUs ASIC quality how high you can go on the voltage. If you got a high ASIC quality you can run at a higher clock with a lower voltage but if you got a low ASIC quality you will need a higher voltage to run at a higher clock. Generally you won't be able to run 1360mhz core engine clock at 850mV, I couldn't even get some cards to run at 1126mhz with a voltage so low. So try to increase it while lowering the core engine clock and see what you get. Most of the time its not worth running it so high because the speed improvements are not that great.
|
|
|
|
keksik
Jr. Member
Offline
Activity: 169
Merit: 1
|
|
June 20, 2018, 06:53:06 PM |
|
what is the best miner for rx 580 4/8gb? also what core frequency is recommended? for eth im having 1150mhz/850mV so curious how to increase... basicaly all of mine are able to go for 1360 as based, but not sure what voltage to use? stock is 1150mV but trying to underclock, or better said find the sweet spot..1200 or 1300mhz? and what voltage....ill leave memory as is because it worked for eth stable so dont touch what works there is srb, xmr and claymore i think? anything else? i dont want to play with threads for each card in xmr.... It depends on your GPUs ASIC quality how high you can go on the voltage. If you got a high ASIC quality you can run at a higher clock with a lower voltage but if you got a low ASIC quality you will need a higher voltage to run at a higher clock. Generally you won't be able to run 1360mhz core engine clock at 850mV, I couldn't even get some cards to run at 1126mhz with a voltage so low. So try to increase it while lowering the core engine clock and see what you get. Most of the time its not worth running it so high because the speed improvements are not that great. thank you for your response, i pasted above my results for 9 cards. not bad,but could be better. im a bit disappointed by hash for rx580 with 4gb only.
|
|
|
|
CuChO
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 17, 2018, 01:01:24 PM |
|
I was using XMRIG AMD and my hash were only 745h/s per RX580 (8gb version) using 90% power, core 1340 , Mem 2250 I see a lot of people getting 1kh so SRBMINER claims better performance and effectively now I get 950h/s using the same settings then previous miner
|
|
|
|
crypto570
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 21, 2018, 04:56:38 PM |
|
Seeing all of your hashrates with Cryptonight Heavy I'm pretty sure I'm doing something wrong with my R9 290s. It just seems that 440H/s is a bit on the low side. Have tried XMR-Stak and xmrig
seems like same with my card 290 Was really hoping that I'm doing something wrong Well, think I keep mining CryptonightV7 then. A little late, long time lurker; new registeree, but I mine loki(cn heavy) with 2 r9 290x(trix, 3fan version) i get about 540-560 h/s stock clocks(1000core, 1300 mem) and about 600-620 h/s overclocked to (1060core, 1500 mem) runs stable @<65°c ambient temp 21°c ≈ 70°f. And about 55°c with AC ambient temp 60°f. I know the 290x have 4 more compute units than the 290, and u can unlock them in many 290s if they are only software locked, and from what I hear it isnt too intensive. Theres a progran that checks if theyre unlockable. Note: Undervolted core Voltage to 1075mV, and left mem alone. The 2 gpus and system is pulling ≈ 425ish watts from the wall.
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
July 21, 2018, 05:07:34 PM |
|
with latest srb miner i get around 1550hs/ vega56... clocks 1480/950mhz
|
|
|
|
kostepanych2
|
|
August 15, 2018, 12:03:04 PM |
|
Hello, What hashrate has RX 470 8gb on Cryptonight Heavy? Is it differ from RX 570?
|
|
|
|
|
marshmellow246
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 06, 2018, 10:19:54 PM Last edit: October 06, 2018, 10:50:50 PM by marshmellow246 |
|
1 MSI rx580 950-1000H/s, XMR-stak
GPU: 1130/850 MEMORY: 2200/850 61 watts aug blockchain driver stock bios for now. get 6 loki every 21 hours not bad for $195 from new egg 2 or 3 weeks ago.225 delivered and $30 mail in rebate. I also got strange brigade, star control origins and assassins creed odyssey for free.
|
|
|
|
koccc
Newbie
Offline
Activity: 6
Merit: 0
|
|
October 06, 2018, 10:47:04 PM |
|
480 8gb (samsung mod timing) 1200/2000/0.92v 1135 h/s miner srb 1.6.7 Intensity 58
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
BTCLife.global participant
|
|
December 11, 2018, 04:12:57 PM |
|
480 8gb (samsung mod timing) 1200/2000/0.92v 1135 h/s miner srb 1.6.7 Intensity 58
Are you sure you are talking about Cryptonight Heavy Hashrate? My result is 745 H/s on RX 480, ETH timing mod, clocks 1150/2150. XMR-AEON-STAK-2.6.0
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
December 11, 2018, 06:33:22 PM |
|
480 8gb (samsung mod timing) 1200/2000/0.92v 1135 h/s miner srb 1.6.7 Intensity 58
Are you sure you are talking about Cryptonight Heavy Hashrate? My result is 745 H/s on RX 480, ETH timing mod, clocks 1150/2150. XMR-AEON-STAK-2.6.0 polaris 8gb makes 1100-1200h/s on heavy algo easily vega does 1800-2000h/s
|
|
|
|
|