NEW Bitmain Antminer L3++ 596 MH RELEASE MAY

[sil2222]

Its real Antminer L3++

Be careful the new Bitmain Antminer L3++ is less efficient than the L3+ 1.762j/Mh vs 1.587j/Mh and also noisier!

https://www.asicminervalue.com/miners/bitmain/antminer-l3-596mh

https://twitter.com/ASICMinerValue/status/989872239960092673

CHECK DATA SHEET ON LINK

update:

BITMAIN HAS ALREADY LISTED L3++ specifications and other information on the Antminer L3+. Specifications of L3++ maybe slightly higher than L3+.

DELIVERY MAY PRICE IS $ 750.00.

[cod3gen]

596 Mh/s on 1050w? Yes, its less efficient. My L3+`s runs at ~630Mh/s with between 950w - 1000w on wall.

[Manhcoin86]

information is not incorrect?

[dutchlincoln]

596 Mh/s on 1050w? Yes, its less efficient. My L3+`s runs at ~630Mh/s with between 950w - 1000w on wall.

hi,

How do you get 630 out of your L3+? Im curious...

[KashHappy]

596 Mh/s on 1050w? Yes, its less efficient. My L3+`s runs at ~630Mh/s with between 950w - 1000w on wall.

hi,

How do you get 630 out of your L3+? Im curious...

I'm sure he's overclocked. I'm curious to know the settings and steps as well.

[hawkfish007]

Simply changing frequency to 475 or 500 will increase hash rate over 600 MH/s, default is 384. Keep an eye on for temp and Xs, most L3+s should be able to mine at over 600 MH/s at 475 MHz.

[jstefanop]

This is not new or news...its just an overclocked L3+...

[sil2222]

This is not new or news...its just an overclocked L3+...

Well if you were waiting for L4 from Bitmain this is what they are going to offer instead.

[HagssFIN]

It is most likely still using the same 28nm process chip BM1485.

And maybe there is even the same total amount of chips.

The only new thing looks to be that it is overclocked a little.