Can I get some help with my blade please?

[phazon307]

that's my ip you typed so I add my ip to the server address on the blade then what do I put in the command line for instance if I want to add
stratum+tcp://us1.eclipsemc.com:333

[sidehack]

Is BFG already pointed at your eclipsemc pool?

What's the contents of the shortcut? Like when you right-click-> properties, what's the "target" line read?

[phazon307]

bfgminer -0 http://us1.eclipsemc.com:8337-uxxxxx_xxxxx -p xxxxxx -G -S then the scrypt for the Icarus settings for the USB block erupters.

[sidehack]

According to 7queue in an earlier reply, you need to tuck a "--http-port 8332" in there somewhere. Put that in the line, restart BFG using that shortcut, and point your blades to server 192.168.0.3, port 8332 and see if they light up.

[7queue]

If you create an emcmine.bat this may work, I haven't verified it:

Code:

timeout /t 3
bfgminer -o http://us2.eclipsemc.com:8337 -u your-username -p your-password -S all --icarus-options 115200:1:1 --scan-serial erupter:all --icarus-timing 3.0=100 --no-submit-stale --http-port 8332

8 )

Edit: just realize you need to replace bfgminer with the path to the .exe - C:\someplace\bfgminer.exe

Easier to do what sidehack said and tack that onto the end of your shortcut

[phazon307]

ok can't I just put that in the command line though? I tried running it the way the user above you said and it just opens and closes bfg miner. I set the server ip on the configuration page to my ip and added --http-port 8337 in bfg miner and it just opens and closes.

[phazon307]

 -o http://us1.eclipsemc.com:8337 -u phazon307_myminer -p djdsfdf  -G -Sflall --icarus-options 115200:1:1 --icarus-timing 3.0=100 --http-port 8332
Here is an image of configuration page.
http://s15.postimg.org/i3g25zpdn/DSCF6228.jpg

[phazon307]

Tried that command line you suggested and it opens BFGminer but it only shows my 4 usb miners.

[phazon307]

Do I change the gateway and dns from 192.168.1.x to 192.168.0.x?

[sidehack]

Yes, you'll want the gateway and DNS set to your 0.x subnet

[phazon307]

Ok I tried that did you look at the image I posted can you contact me on yahoo so we can get this done and over with faster my yahoo id is evil1stardragon@yahoo.com I add --http-port 8332 in bfgminer it still only shows my 4 usb miners and not the blade.

[sidehack]

The blade's default gateway and primary DNS are currently set to 192.168.0.1?

You put --http-port 8332 in the shortcut target line and restarted BFG using that shortcut?

[phazon307]

yes and it just opens then closes.

[sidehack]

What happens if you run it straight from a command line?

'cd' to the folder where bfgminer.exe is, then type in the same as your target line in that shortcut link.

[phazon307]

I am thinking I should just download the new bfgminer mine uses the command line version to start it. I have no bat file for bfgminer as it is all done with a script typed into the location section of the properties.

[sidehack]

How old is your current version? That could be the issue - if it predates stratum proxy implementation, the unrecognized command might be throwing it for a loop.

[phazon307]

I have connected to stratum before I do have a different version of bfg miner but I could never get it to work with my usb erupters

[sidehack]

Newer versions of BFG probably use something different than --icarus for Block Erupters.

[phazon307]

I am using bfgminer 3.3.0 windows 64

[sidehack]

If you were on cgminer and slush proxy I'd have you going already. Darn this learning new software stuff...