nanofury nf1 mit raspberry pi - nicht kompatibel?

[Haribo1980]

Hallo Zusammen,

gibt es hier jemanden der es schon geschafft hat nanofury nf1 USB miner mit dem Raspberry Pi zum laufen zu bekommen?

Ich habe schon überall gesucht aber alle Tips wie, Spannung des Hub halbieren oder den nanofury manuell anzusteuern funzen nicht weder mit rasbian noch mit minepeon... Ich verzweifle... Normale blockeruper laufen, nur der nanofury nicht.

Hilfeeeee...

[vs3]

Is this what you're looking for:  ?

Hello,

could anyone sent me a kind of tutorial how to get the nanofury working on rasberry pi? I dont know much about linux.

Raspian ist still installed, and networkspeed ist reduced like in your messages. But which bfgminer version should I install (link?). What do you mean with "after comiling"

are there any other settings do do? ... I tryed lots of versions but nothing works... A small tutorial would save my next 5 evenings

Greetings from Germany

First you need to install needed library

Code:

1. sudo aptitude update
2. sudo aptitude install libudev-dev libusb-1.0-0-dev libfox-1.6-dev autotools-dev autoconf automake libtool libncurses-dev yasm curl libcurl4-openssl-dev libjansson-dev pkg-config uthash-dev make pkg-config yasm 

Second download HIDAPI from git

Code:

1. git clone git://github.com/signal11/hidapi.git hidapi
2. cd hidapi
3. ./bootstrap
4. ./configure --prefix=/usr
5. make
6. sudo make install 

Third download bfgminer to some directory(in this example is "miner")

Code:

1. mkdir miner
2. cd miner
3. wget http://luke.dashjr.org/programs/bitcoin/files/bfgminer/3.8.1/bfgminer-3.8.1.tbz2
4. tar xvf bfgminer-3.8.1.tbz2
5. cd bfgminer-3.8.1
6. ./configure 
7. make

You can enable or disable some miner while run ./configure bfgminer with this options
Example: ./configure --enable-bfsb --disable-bitforce

Code:

	--disable-avalon        Compile support for Avalon (default enabled)
	--enable-cpumining      Build with cpu mining support(default disabled)
	--enable-opencl         Compile support for OpenCL (default disabled)
	--disable-adl           Build without ADL monitoring (default enabled)
	--disable-bitfury       Compile support for Bitfury (default enabled)
	--enable-bfsb           Compile support for BFSB (default disabled)
	--disable-bigpic        Compile support for Big Picture Mining USB (default enabled)
	--disable-littlefury    Compile support for LittleFury (default enabled)
	--disable-nanofury      Compile support for NanoFury (default enabled)
	--disable-hashbuster    Compile support for HashBuster Nano (default enabled)
	--disable-hashbuster2   Compile support for HashBuster Micro (default if libusb)
	--enable-metabank       Compile support for Metabank (default disabled)
	--disable-bitforce      Compile support for BitForce (default enabled)
	--disable-icarus        Compile support for Icarus (default enabled)
	--disable-klondike      Compile support for Klondike (default enabled)
	--enable-knc            Compile support for KnC (default disabled)
	--disable-modminer      Compile support for ModMiner (default enabled)
	--disable-x6500         Compile support for X6500 (default enabled)
	--disable-ztex          Compile support for ZTEX (default if libusb)
	--enable-scrypt         Compile support for scrypt mining (default disabled)
	--with-system-libblkmaker  Use system libblkmaker rather than bundled one (default disabled)
	--without-sensors       Build with libsensors monitoring (default enabled)
	--without-curses        Compile support for curses TUI (default enabled)
	--without-libmicrohttpd Compile support for libmicrohttpd getwork server (default enabled)
	--without-libevent      Compile support for libevent stratum server (default enabled)
	--without-libusb        Compile using libusb (default enabled)
	--without-libudev       Autodetect FPGAs using libudev (default enabled)

Then change usb speed to usb 1 with text editor nano

Code:

1. sudo nano /boot/cmdline.txt
then add dwc_otg.speed=1 at the end of line

To run bfgminer just go to the directory

Code:

1. cd miner
2. cd bfgminer-3.8.1
3. sudo ./bfgminer

That was the summary i colected from other thread since i am also linux noob 

[cagrund]

Hallo Zusammen,

gibt es hier jemanden der es schon geschafft hat nanofury nf1 USB miner mit dem Raspberry Pi zum laufen zu bekommen?

Ja, ich habe das am laufen, sogar in Kombi mit 40 USB Eruptoren. - Aber nur mit viel Mühe und 2 Tage Internet-Recherche. - Dafür läuft der NF1 jetzt mit ~2,6 GH.  

Du kannst mit Linux/Minepeon umgehen? - Wenn noch Bedarf besteht könnte ich hier ein Tutorial posten.

Gruss Carsten.