hashrateproducts (OP)
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 560
Merit: 143
Active 24/7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 01:22:42 AM |
|
Just received 4 in the mail. Two looked nice, the other two had a lot of glue on sticking out between the board and the aluminium plate, which I was surprised to find (not great quality control). Plugged em in to my 7 port anker usb hub and they were recognized right away. Loaded up bfgminer and all four worked, pretty simple. However, I had trouble with setting the oscillator command in my config file. osc 50 and 51 worked, but 52, 53 crashed it. I had to change it manually through bfgminer (as shown in their setup guide). All hovering around 2.3-2.4 Ghs at Osc53 with hardware errors ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) . Not too bad, but not great either. Hey, Sorry about this. A few of them had thermal paste that had squeezed out the sides and we tried to clean it of the best we could. We have asked the manufacturer to include this in their quality check. We also wanted to get these out to you guys as quickly as possible so that you could get hashing right away. This paste won't affect the hash rate. Could you please email us at info@hashrateproducts.com and we will find a solution for you.
|
Free space
|
|
|
hashrateproducts (OP)
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 560
Merit: 143
Active 24/7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 01:23:43 AM |
|
I received my first order today. Works great. Went from Customs USSFOA to delivered in 1 day, so I assume I was very fortunate. Currently hashing at 2.17~2.35 no overclock.
Awesome! Glad to hear it! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
Free space
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 04:17:18 AM |
|
Just received 4 in the mail. Two looked nice, the other two had a lot of glue on sticking out between the board and the aluminum plate, which I was surprised to find (not great quality control). Plugged em in to my 7 port anker usb hub and they were recognized right away. Loaded up bfgminer and all four worked, pretty simple. However, I had trouble with setting the oscillator command in my config file. osc 50 and 51 worked, but 52, 53 crashed it. I had to change it manually through bfgminer (as shown in their setup guide). All hovering around 2.3-2.4 Ghs at Osc53 with hardware errors ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) . Not too bad, but not great either. couple of questions to see if i can guide ya to better hashes: 1) what os/host are you using. 2) waht is the amperage of the hubs supply 3) if host is a pi or other small arm device, hows it powered. 4) at osc53 what is the error rate compared to osc51-2
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
sinnyc
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 04:54:53 AM |
|
I received my 3 today. 2 worked perfectly - almost plug and play. Overclocked to 53 with negligible rejects and HW errors around 0.35%. The 3rd unit registers as a USB device but can't be found by bfgminer. My hub hasn't arrived yet so these are plugged directly into the computer but I've tried every usb port and no dice.
I am very new to this so I wouldn't be at all surprised to find out I'd missed something simple. Any thoughts?
|
|
|
|
sinnyc
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 08:28:18 PM |
|
I received my 3 today. 2 worked perfectly - almost plug and play. Overclocked to 53 with negligible rejects and HW errors around 0.35%. The 3rd unit registers as a USB device but can't be found by bfgminer. My hub hasn't arrived yet so these are plugged directly into the computer but I've tried every usb port and no dice.
I am very new to this so I wouldn't be at all surprised to find out I'd missed something simple. Any thoughts?
Got a response via email and will do more troubleshooting tonight.
|
|
|
|
ThBitCollective
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 11:46:38 PM |
|
I received my 3 today. 2 worked perfectly - almost plug and play. Overclocked to 53 with negligible rejects and HW errors around 0.35%. The 3rd unit registers as a USB device but can't be found by bfgminer. My hub hasn't arrived yet so these are plugged directly into the computer but I've tried every usb port and no dice.
I am very new to this so I wouldn't be at all surprised to find out I'd missed something simple. Any thoughts?
Got a response via email and will do more troubleshooting tonight. Curious to find out what you come up with. Mine showed up and is hashing @ 1.97-2.06 at the stock clock but is so hot you can smell it. With active cooling I can get a fairly stable 2.3 with the clock @ 52 anything more than that it a mess. This is tested directly on a few different MOBOs. Might see if I can carve this heatsink off to see what really is going on under it. ( really does look like a 5 year old mashed a s'more together)
|
|
|
|
AmGfxMarty
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 63
Merit: 10
Hi, I'm Marty.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2014, 12:05:03 AM |
|
Received mine today. Works fine, a little slow but its all good. OC'ing helps a little. These definitely run a bit hot, they need to be cooled. Seems like a good product.
|
|
|
|
ithd
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2014, 04:50:00 AM |
|
Just received a response from hashratestore regarding the product. Excellent customer service! I'll be looking out for future products from them. Great company.
|
|
|
|
tmu
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2014, 06:58:43 PM |
|
Received my two units Tuesday. First I tried to install latest version of cgminer and then bfgminer (ubuntu), no connection. Now I have them running under RaspberryPi / Minepeon 2.4.3 with HexU/cgminer with steady ~2.4MH/s per unit, bit hot and rejects (minepeon) 0.3% I also had some issues with my powered usb-hub but after I changed it to D-link DUP-H7 I have had no power issues. Next I should build some kind of support thingy with cooling fan and RPi-slot. And then mayby order three more
|
|
|
|
hashrateproducts (OP)
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 560
Merit: 143
Active 24/7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2014, 10:41:42 PM |
|
I received my 3 today. 2 worked perfectly - almost plug and play. Overclocked to 53 with negligible rejects and HW errors around 0.35%. The 3rd unit registers as a USB device but can't be found by bfgminer. My hub hasn't arrived yet so these are plugged directly into the computer but I've tried every usb port and no dice.
I am very new to this so I wouldn't be at all surprised to find out I'd missed something simple. Any thoughts?
Got a response via email and will do more troubleshooting tonight. Curious to find out what you come up with. Mine showed up and is hashing @ 1.97-2.06 at the stock clock but is so hot you can smell it. With active cooling I can get a fairly stable 2.3 with the clock @ 52 anything more than that it a mess. This is tested directly on a few different MOBOs. Might see if I can carve this heatsink off to see what really is going on under it. ( really does look like a 5 year old mashed a s'more together) Hey, could you please email us? Sorry about this. Could you please email us at info@hashrateproducts.com and we will find a solution for you.
|
Free space
|
|
|
sinnyc
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2014, 05:14:20 AM |
|
I received my 3 today. 2 worked perfectly - almost plug and play. Overclocked to 53 with negligible rejects and HW errors around 0.35%. The 3rd unit registers as a USB device but can't be found by bfgminer. My hub hasn't arrived yet so these are plugged directly into the computer but I've tried every usb port and no dice.
I am very new to this so I wouldn't be at all surprised to find out I'd missed something simple. Any thoughts?
Got a response via email and will do more troubleshooting tonight. Once I plugged all 3 into my hub, they worked fine. Customer service was great!
|
|
|
|
hashrateproducts (OP)
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 560
Merit: 143
Active 24/7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2014, 06:10:55 PM |
|
I received my 3 today. 2 worked perfectly - almost plug and play. Overclocked to 53 with negligible rejects and HW errors around 0.35%. The 3rd unit registers as a USB device but can't be found by bfgminer. My hub hasn't arrived yet so these are plugged directly into the computer but I've tried every usb port and no dice.
I am very new to this so I wouldn't be at all surprised to find out I'd missed something simple. Any thoughts?
Got a response via email and will do more troubleshooting tonight. Once I plugged all 3 into my hub, they worked fine. Customer service was great! Awesome, thanks again!
|
Free space
|
|
|
hashrateproducts (OP)
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 560
Merit: 143
Active 24/7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2014, 12:44:17 AM |
|
|
Free space
|
|
|
iarsenaux
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2014, 12:53:01 AM |
|
PM and email sent.
|
|
|
|
davideak
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2014, 08:34:24 AM |
|
Nothing to post - Still haven't received my units ... ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
AmGfxMarty
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 63
Merit: 10
Hi, I'm Marty.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2014, 01:33:22 PM |
|
Well, been mining with my yellowjacket for 3 days now and since day two I have been getting this a lot: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fdl.dropboxusercontent.com%2Fu%2F69698375%2Fyellowjacket%2520dropout.jpg&t=665&c=icJmd0dcMAtRFA) I have been running at stock speed most of the time and it is fan cooled. Any suggestions?
|
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2014, 03:32:40 PM |
|
Well, been mining with my yellowjacket for 3 days now and since day two I have been getting this a lot: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fdl.dropboxusercontent.com%2Fu%2F69698375%2Fyellowjacket%2520dropout.jpg&t=665&c=icJmd0dcMAtRFA) I have been running at stock speed most of the time and it is fan cooled. Any suggestions? why is your difficulty set to 32 it should be like 2 or 4 for the amount of hashrate you have. also what pool?
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
AmGfxMarty
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 63
Merit: 10
Hi, I'm Marty.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2014, 01:38:04 PM |
|
That was on Multipool and I am set to a diff of 4 but you see my results. Ultimately I left it running for the rest of the day and it seems to have cleared up but was stuck running 1.09 ghs.
|
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2014, 09:19:02 PM |
|
That was on Multipool and I am set to a diff of 4 but you see my results. Ultimately I left it running for the rest of the day and it seems to have cleared up but was stuck running 1.09 ghs.
Try bfgminer with --benchmark on the end. But otherwise it seems to be running well. The frequency drop is just because it doesn't return a diff 32+ nonce in a certain time period so bfg tries to reinit the device. Nothing appears wrong other than that ridiculous diff multipool has you set at Edit. Stupid autocorrect
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
hashrateproducts (OP)
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 560
Merit: 143
Active 24/7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 05:06:26 AM |
|
Nothing to post - Still haven't received my units ... ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Hey! Send us an email ( info@hashrateproducts.com) or a PM with your order number and we can look into it. Thanks!
|
Free space
|
|
|
|