RX570 GPUs installed but not recognized by miner I will give you 1 day of mining

[QuantMiner]

If someone can help me get this rig mining I will give you 1 day of mining. Seriously, I've spent days trying to fix this. The first person who can tell me how to fix this, I will mine for you for one day.

I built an ethereum mining rig on Windows 10 that has an H270 Pro4 mobo, 4GB Ram, 120GB SSD, 850W PS, 5 RX570's. I can't get any mining app to start mining and it is driving me crazy. The cards are all recognized by the computer (device manager and Gpu-z), but none of the miners will start mining.

Here you can see the commands I'm running for Claymore, along with the device manager and GPU-z both recognizing my cards... https://m.imgur.com/a/3ai7Xir
https://imgur.com/a/3ai7Xir
This is the full output. As you can see there is not an error reported for claymore. I looked for a verbose option but didn’t see one.

I have tried the following:

1. Claymore 11.7 - EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0x0fAea99B63369dc4eaeB50217e1DED7FDb91F551 -epsw x -allpools 1
2. Ethminer 0.13.0 - ethminer.exe --farm-recheck 200 -U -S us1.ethermine.org:4444 -FS eu1.ethermine.org:4444 -O 0x0fAea99B63369dc4eaeB50217e1DED7FDb91F551.Miner1
    a. Error - No CUDA driver found
3. PhoenixMiner 2.9e - PhoenixMiner.exe -pool us1.ethermine.org:4444 -pool2 eu1.ethermine.org:4444 -wal 0x0fAea99B63369dc4eaeB50217e1DED7FDb91F551.Miner1 -proto 3
    a. No CUDA driver found

I (believe) I have set all required system variables, turned off microsoft features, set TOLUD to 3.5, made PciE the main graphics, changed the bus from Auto to Gen1/Gen2 and then back to Auto. I have also tried mining with only 1,2, and 3 cards (to verify it’s not a power issue).

If someone can help me get this rig mining I will give you 1 day of mining. Seriously, I've spent days trying to fix this. The first person who can tell me how to fix this I will mine for you for one day.

[leonix007]

If someone can help me get this rig mining I will give you 1 day of mining. Seriously, I've spent days trying to fix this. The first person who can tell me how to fix this, I will mine for you for one day.

I built an ethereum mining rig on Windows 10 that has an H270 Pro4 mobo, 4GB Ram, 120GB SSD, 850W PS, 5 RX570's. I can't get any mining app to start mining and it is driving me crazy. The cards are all recognized by the computer (device manager and Gpu-z), but none of the miners will start mining.

Here you can see the commands I'm running for Claymore, along with the device manager and GPU-z both recognizing my cards...

I have tried the following:

1. Claymore 11.7 - EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0x0fAea99B63369dc4eaeB50217e1DED7FDb91F551 -epsw x -allpools 1
2. Ethminer 0.13.0 - ethminer.exe --farm-recheck 200 -U -S us1.ethermine.org:4444 -FS eu1.ethermine.org:4444 -O 0x0fAea99B63369dc4eaeB50217e1DED7FDb91F551.Miner1
    a. Error - No CUDA driver found
3. PhoenixMiner 2.9e - PhoenixMiner.exe -pool us1.ethermine.org:4444 -pool2 eu1.ethermine.org:4444 -wal 0x0fAea99B63369dc4eaeB50217e1DED7FDb91F551.Miner1 -proto 3
    a. No CUDA driver found

I (believe) I have set all required system variables, turned off microsoft features, set TOLUD to 3.5, made PciE the main graphics, changed the bus from Auto to Gen1/Gen2 and then back to Auto. I have also tried mining with only 1,2, and 3 cards.

If someone can help me get this rig mining I will give you 1 day of mining. Seriously, I've spent days trying to fix this. The first person who can tell me how to fix this I will mine for you for one day.

The error seems incomplete, kindly post the entire miner error encountered.

its normal to have a CUDA driver to be missing since you have no NVIDIA cards.

[cudapop]

For ethminer: do not use the "-U" switch, that makes ethminer use CUDA which is for nvidia cards only, instead use the "-G" switch which will make ethminer use OpenCL for your AMD cards.

[carlosgeorge]

Which driver did you use?.

Contact me by directly if you want free remote help.

[sergioheadache]

i can help, just install temaviewer,

i have many rigs all are 570 / 580 card. much experience with settinng them up.
you can cantact me with PM

[SpceGhst]

Add "-mode 1" to your Claymore config line.

[TGJ]

850w PSU, is that enough power?

[SpceGhst]

850w PSU, is that enough power?

Good point.  Probably not enough power.  OP, try removing one of the cards as you might be able to run 4 with that PSU, but not 5.

[squallw]

You need to verify all the things related like, drivers, miner, command line, risers, psu, etc.

Your cards are STOCK? or did you biosmod?
Driver version?
What the error message?

Do not accept remote 'free' help from newbies, it smells like scam.

[alikait]

I've had this problem, usually let it sit for 3-4 minutes and if nothing happens I just hit the 's' key.  All GPU's then pop up, don't know if it'll work but might help.

[yrk1957]

Do not accept remote 'free' help from newbies, it smells like scam.

^^^ This.

Get all advice you want, but allow no one access to your system, do everything yourself.

[carlosgeorge]

Do not accept remote 'free' help from newbies, it smells like scam.

^^^ This.

Get all advice you want, but allow no one access to your system, do everything yourself.

And there is the bad thing on trying help just for fun.

I hope he solved the issue..

[QuantMiner]

For ethminer: do not use the "-U" switch, that makes ethminer use CUDA which is for nvidia cards only, instead use the "-G" switch which will make ethminer use OpenCL for your AMD cards.

Updated... still no go

[QuantMiner]

I've had this problem, usually let it sit for 3-4 minutes and if nothing happens I just hit the 's' key.  All GPU's then pop up, don't know if it'll work but might help.

I would do this, but the command executes and then the program exits. If you take a look at the pic https://imgur.com/a/3ai7Xir you will see that the command prompt is ready for a new command. If I hit the s key, it will just be a string on a command line with no executable.

[s0ftcorn]

did you install the chipset drivers? are all drivers (especially chipset) up to date? dont use any DriverCleaner or whatever tools for that, check directly on the manufacturers website.
Also: is your windows up to date and which drivers for your graphics card are you using?

[QuantMiner]

You need to verify all the things related like, drivers, miner, command line, risers, psu, etc.

Your cards are STOCK? or did you biosmod?
Driver version?
What the error message?

Do not accept remote 'free' help from newbies, it smells like scam.

Your cards are STOCK? or did you biosmod?
The cards are stock.

Driver version?
Amd 22.19.659.0 Crimson Beta pute-Release-Notes.aspx]https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

What the error message?
I have posted the only two error messages that I get. When I run Claymore, I don't get an error message.

[s0ftcorn]

why are you using a beta driver instead of the newest one? https://support.amd.com/de-de/download/desktop?os=Windows%2010%20-%2064

[QuantMiner]

did you install the chipset drivers? are all drivers (especially chipset) up to date? dont use any DriverCleaner or whatever tools for that, check directly on the manufacturers website.
Also: is your windows up to date and which drivers for your graphics card are you using?

No updates available... https://imgur.com/a/RLJNy5Q
But Intel ALSO sees my GPU?! WTF

[QuantMiner]

I've had this problem, usually let it sit for 3-4 minutes and if nothing happens I just hit the 's' key.  All GPU's then pop up, don't know if it'll work but might help.

I would do this, but the command executes and then the program exits. If you take a look at the pic https://imgur.com/a/3ai7Xir you will see that the command prompt is ready for a new command. If I hit the s key, it will just be a string on a command line with no executable.

[s0ftcorn]

did you install the chipset drivers? are all drivers (especially chipset) up to date? dont use any DriverCleaner or whatever tools for that, check directly on the manufacturers website.
Also: is your windows up to date and which drivers for your graphics card are you using?

No updates available... https://imgur.com/a/RLJNy5Q
But Intel ALSO sees my GPU?! WTF

intel gets detailed info about your rig.
I guess you reinstalled windows multiple times, right?
Also: check https://www.asrock.com/mb/Intel/H270%20Pro4/index.asp#Download instead of intel. You want especially the INF Driver aka chipset.
Also please try the latest adrenaline drivers from AMD, instead of the older crimson beta blockchain driver thingy.