[ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only

[torzsy]

closed

[dodo333]

Very good support! ! !

[torzsy]

Very good support! ! !

Thank you!

I hope we can test the new daemon.

[MaGNeT]

Great! Mining there now 

Brought some people over from FOK! forum too

[torzsy]

Great! Mining there now 

Brought some people over from FOK! forum too

Thanks MaGNeT!

[Aur3]

Finally found working pool of earthcoin, thanks for creating this

[mac-coin]

I've just switch over too

How accurate are the EAC/Day on this pool

[torzsy]

I've just switch over too

How accurate are the EAC/Day on this pool

Block reward is 10.000 / block now as I know. So it should be correct. But we will see in a few hours (if we find blocks).

Thanks!

edit: previous daemon was bugged so the stats were wrong

[woutersteven]

Not working for me, getting:

2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 0 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192

2013-12-22 20:16:37: Listener for "EAC0" started
2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 1 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192

2013-12-22 20:16:37: Listener for "EAC1" started
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Started cgminer 3.1.0
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Probing for an alive pool
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:38] pool 0 JSON stratum auth failed: (null)
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers were found that could be used to get work from.
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Please check the details from the list below of the servers you have input
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Pool: 0  URL: stratum+tcp://eac.cryptominer.net:3403  User: woutersteven.eac1  Password: x
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers could be used! Exiting.
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:37] Started cgminer 3.1.0
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:38] Probing for an alive pool
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:39] pool 0 JSON stratum auth failed: (null)
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers were found that could be used to get work from.
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Please check the details from the list below of the servers you have input
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Pool: 0  URL: stratum+tcp://eac.cryptominer.net:3403  User: woutersteven.eac1  Password: x
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers could be used! Exiting.

[MaGNeT]

Getting all excited for finding that first block  

[MaGNeT]

Not working for me, getting:

2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 0 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192

2013-12-22 20:16:37: Listener for "EAC0" started
2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 1 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192

2013-12-22 20:16:37: Listener for "EAC1" started
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Started cgminer 3.1.0
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Probing for an alive pool
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:38] pool 0 JSON stratum auth failed: (null)
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers were found that could be used to get work from.
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Please check the details from the list below of the servers you have input
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Pool: 0  URL: stratum+tcp://eac.cryptominer.net:3403  User: woutersteven.eac1  Password: x
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers could be used! Exiting.
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:37] Started cgminer 3.1.0
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:38] Probing for an alive pool
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:39] pool 0 JSON stratum auth failed: (null)
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers were found that could be used to get work from.
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Please check the details from the list below of the servers you have input
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Pool: 0  URL: stratum+tcp://eac.cryptominer.net:3403  User: woutersteven.eac1  Password: x
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers could be used! Exiting.

try to change to:

-o stratum+tcp://eac.cryptominer.net:3403 -u woutersteven.eac1 -p x

?

[mac-coin]

so who's going to get the first block, lol

[torzsy]

Not working for me, getting:

2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 0 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192

2013-12-22 20:16:37: Listener for "EAC0" started
2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 1 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192

2013-12-22 20:16:37: Listener for "EAC1" started
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Started cgminer 3.1.0
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Probing for an alive pool
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:38] pool 0 JSON stratum auth failed: (null)
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers were found that could be used to get work from.
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Please check the details from the list below of the servers you have input
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Pool: 0  URL: stratum+tcp://eac.cryptominer.net:3403  User: woutersteven.eac1  Password: x
2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers could be used! Exiting.
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:37] Started cgminer 3.1.0
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:38] Probing for an alive pool
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:39] pool 0 JSON stratum auth failed: (null)
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers were found that could be used to get work from.
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Please check the details from the list below of the servers you have input
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Pool: 0  URL: stratum+tcp://eac.cryptominer.net:3403  User: woutersteven.eac1  Password: x
2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers could be used! Exiting.

Should be working now.

[HashHound]

Nice pool, thanks for putting it up.

[woutersteven]

It's working now. I'm guessing the worker wasn't ready yet. How long does it normally take for a worker after having been saved to be usable?

[mac-coin]

I had the same problem,  took about 5-10 mins until it would start.

I still think the EAC/Day is a bit optimistic

[torzsy]

It's working now. I'm guessing the worker wasn't ready yet. How long does it normally take for a worker after having been saved to be usable?

It should be fast, max 1 min.

[MaGNeT]

First block found, great payout!

[torzsy]

[mac-coin]

My works keep having to wait for work every 10mins or so

Anything you can do to fix