Antminer S9 works subpar and incredibly erratically, hardware or firmware?

[Pleasebitmain]

One of my Antminer S9s has been working extremely inconsistently for the past months and on average at about 1/3 the rate that it is meant to.

It stops working sporadically and requires several daily reboots and the hashboards work at wildly fluctuating rates.

Sometimes a hashboard will display way too high rates like 5000 GH/S.

Here are some pictures:

https://imgur.com/a/4r8qcTe

(sorry for the pictures taken of the screen, I'm trying to fix this remotely and the people by the miners are not computer savvy,
if anyone has a good idea of how to control the miners without having to buy an absurdly priced router I'm all ears)

The temperatures are also strange, in one of the pictures above one is 17 degrees.

I know this isn't just that the antpool graph is inaccurate as it really has just produced 1/3 of the btc the other miners have.

I'm using Bitmain's PSU.

Is this a firmware or a hardware problem?

How do I copy and include the kernel log in this post in case you need to see it?

Should I send it in for repair?

I am still under warranty.

Also, does the Antminer still use 1300 watts at all times even when it is not working at full capacity?

Thank you.

[fanatic26]

Are you running on 220v power with that PSU or 110v? That kind of inconsistency is usually power related.

[OgNasty]

The temperature on the middle board would lead me to believe it wasn't operating.  This could be causing the strange readings you're seeing.  The age old question is...  Have you tried restarting it?

[Pleasebitmain]

Yes, I am running on 220 v power.

Yes, I have tried restarting it, both by pulling the plug and by rebooting the operating system.

I don't think there's a specific hashboard that doesn't work. As you can see from the pictures, at times it does indeed
work at 13.5 TH/s or above but at other times it goes to zero or somewhere in the middle, oscillating up and down.

Maybe I'm wrong in my reasoning, I really am not as intimate as I wish I was with how these miners work.

[MinerMEDIC]

A quick glance at the log will tell you what the problem is. Be a sport and post it. Don't forget to use "#" above " ".

[Pleasebitmain]

A quick glance at the log will tell you what the problem is. Be a sport and post it. Don't forget to use "#" above " ".

That's the thing, how do I post the kernel log in a post in this thread the way I see others do it where you can scroll within the window?

I can't just copy paste the whole thing or?

I would figure out how with trial and error but I'm far away from the actual miner meaning I have to troubleshoot through my 55 year-old
relative who has physical access to the miner.

Also, I have no idea what you mean by "Don't forget to use "#" above " " "

[MinerMEDIC]

In the forum post editor[does the editor look allot different on other OSs, maybe # isn't exactly above that emoji ?] You'll see a button that is a hashtag. Clicking that creates "[c0de][/c0de]". You cut and paste the log text between "[c0de]" AND "[/c0de]". That puts your whole log in a nice little box.

[fanatic26]

A quick glance at the log will tell you what the problem is. Be a sport and post it. Don't forget to use "#" above " ".

That's the thing, how do I post the kernel log in a post in this thread the way I see others do it where you can scroll within the window?

I can't just copy paste the whole thing or?

I would figure out how with trial and error but I'm far away from the actual miner meaning I have to troubleshoot through my 55 year-old
relative who has physical access to the miner.

Also, I have no idea what you mean by "Don't forget to use "#" above " " "

The # icon is how you encapsulate your code into the scrolling windows so you dont spam the forum. When you are replying, look up at the icons for it, just above the emojis on the right side.

[OgNasty]

I don't think there's a specific hashboard that doesn't work. As you can see from the pictures, at times it does indeed
work at 13.5 TH/s or above but at other times it goes to zero or somewhere in the middle, oscillating up and down.

Look at the pics, it is very clear that one of the hashboards is not working.  The reading it is showing is impossible at that temperature.

[Pleasebitmain]

Here is the kernel log I finally managed to get from the person at the location.

Taking a quick look myself I notice the obvious "Fatal Error: network connection lost!".

Could it simply be a faulty ethernet cable as all the other miners connected through the same router are working flawlessly?

I will try replacing the ethernet cable.

Do you guys agree or can you see anything else fishy in the kernel log that could indicate what the problem is?

Thank you for the replies btw, I appreciate it and notice that you're a very helpful community.

Code:

[17:23, 5/25/2018] Amo Behnam: Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000307] ps7-ttc #0 at df804000, irq=43
[    0.000615] Console: colour dummy device 80x30
[    0.000646] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040210] pid_max: default: 32768 minimum: 301
[    0.040429] M…
[17:23, 5/25/2018] Amo Behnam: Injoori khoobeh?
[16:56, 5/26/2018] Amo Behnam: Salam
Emrooz sefid ghat nashode. Har 5 ta miner kaar mikonan.
[17:00, 5/26/2018] Amo Behnam: Kernel log befrestam ya bayad sabr konam bad az  trip kardan befrestam?
[17:19, 5/26/2018] MO: Are, lotfan kernel log az avalin khat ta akharin khat copy paste kon
[17:19, 5/26/2018] MO: Hamin baraye emrooz kafie
[17:20, 5/26/2018] MO: Reboot ya restart am nakon dige aslan
[17:20, 5/26/2018] MO: Merci
[17:27, 5/26/2018] Amo Behnam: Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000307] ps7-ttc #0 at df804000, irq=43
[    0.000615] Console: colour dummy device 80x30
[    0.000646] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040210] pid_max: default: 32768 minimum: 301
[    0.040429] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040449] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042574] CPU: Testing write buffer coherency: ok
[    0.042909] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042968] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043193] L310 cache controller enabled
[    0.043213] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121035] CPU1: Booted secondary processor
[    0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210359] Brought up 2 CPUs
[    0.210379] SMP: Total of 2 processors activated.
[    0.210387] CPU: All CPU(s) started in SVC mode.
[    0.211050] devtmpfs: initialized
[    0.213457] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214672] regulator-dummy: no parameters
[    0.222361] NET: Registered protocol family 16
[    0.224657] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226952] cpuidle: using governor ladder
[    0.226965] cpuidle: using governor menu
[    0.234410] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235937] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235950] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.236063] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257712] bio: create slab <bio-0> at 0
[    0.259120] vgaarb: loaded
[    0.259826] SCSI subsystem initialized
[    0.261303] usbcore: registered new interface driver usbfs
[    0.261495] usbcore: registered new interface driver hub
[    0.261718] usbcore: registered new device driver usb
[    0.262250] media: Linux media interface: v0.10
[    0.262406] Linux video capture interface: v2.00
[    0.262649] pps_core: LinuxPPS API ver. 1 registered
[    0.262660] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262783] PTP clock support registered
[    0.263135] EDAC MC: Ver: 3.0.0
[    0.264187] Advanced Linux Sound Architecture Driver Initialized.
[    0.267016] DMA-API: preallocated 4096 debug entries
[    0.267029] DMA-API: debugging enabled by kernel config
[    0.267103] Switched to clocksource arm_global_timer
[    0.287965] NET: Registered protocol family 2
[    0.288629] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.288686] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288771] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288817] TCP: reno registered
[    0.288835] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288867] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.289105] NET: Registered protocol family 1
[    0.289456] RPC: Registered named UNIX socket transport module.
[    0.289469] RPC: Registered udp transport module.
[    0.289477] RPC: Registered tcp transport module.
[    0.289486] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289498] PCI: CLS 0 bytes, default 64
[    0.289931] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291937] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.294028] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.294225] msgmni has been set to 967
[    0.295008] io scheduler noop registered
[    0.295020] io scheduler deadline registered
[    0.295061] io scheduler cfq registered (default)
[    0.307147] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.307167] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.431100] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.998886] console [ttyPS0] enabled
[    1.003170] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.010824] [drm] Initialized drm 1.1.0 20060810
[    1.027906] brd: module loaded
[    1.037276] loop: module loaded
[    1.046655] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.052465] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.060256] libphy: XEMACPS mii bus: probed
[    1.064630] ------------- phy_id = 0x3625e62
[    1.069576] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.078320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.084944] ehci-pci: EHCI PCI platform driver
[    1.092230] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.099067] usbcore: registered new interface driver usb-storage
[    1.105901] mousedev: PS/2 mouse device common for all mice
[    1.112037] i2c /dev entries driver
[    1.118991] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.124471] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.130409] Xilinx Zynq CpuIdle Driver started
[    1.135257] sdhci: Secure Digital Host Controller Interface driver
[    1.141466] sdhci: Copyright(c) Pierre Ossman
[    1.145734] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.152561] mmc0: no vqmmc regulator found
[    1.156578] mmc0: no vmmc regulator found
[    1.197122] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205825] usbcore: registered new interface driver usbhid
[    1.211340] usbhid: USB HID core driver
[    1.216061] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222358] nand: Micron MT29F2G08ABAEAWP
[    1.226322] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232274] Bad block table found at page 131008, version 0x01
[    1.238522] Bad block table found at page 130944, version 0x01
[    1.244575] 3 ofpart partitions found on MTD device pl353-nand
[    1.250346] Creating 3 MTD partitions on "pl353-nand":
[    1.255447] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263506] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270821] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279779] TCP: cubic registered
[    1.283012] NET: Registered protocol family 17
[    1.287730] Registering SWP/SWPB emulation handler
[    1.293623] regulator-dummy: disabling
[    1.298017] UBI: attaching mtd1 to ubi0
[    1.827087] UBI: scanning is finished
[    1.838896] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.845952] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.852749] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.859424] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.866262] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.872272] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.879383] UBI: max/mean erase counter: 408/120, WL threshold: 4096, image sequence number: 1283732989
[    1.888761] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.897978] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.897984] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.901913] ALSA device list:
[    1.901917]   No soundcards found.
[    1.918352] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.992022] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.997976] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.007063] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.016970] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.022037] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[    2.033761] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.041189] devtmpfs: mounted
[    2.044292] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.886704] random: dd urandom read with 0 bits of entropy available
[    3.277137] 
[    3.277137] bcm54xx_config_init
[    3.887149] 
[    3.887149] bcm54xx_config_init
[    7.887986] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.894073] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   22.586636] In axi fpga driver!
[   22.589702] request_mem_region OK!
[   22.593093] AXI fpga dev virtual address is 0xdf9fc000
[   22.598230] *base_vir_addr = 0x8c510
[   22.613248] In fpga mem driver!
[   22.616315] request_mem_region OK!
[   22.619945] fpga mem virtual address is 0xe2000000
[   23.426532] 
[   23.426532] bcm54xx_config_init
[   24.056447] 
[   24.056447] bcm54xx_config_init
[   28.057110] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   28.063127] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  683.064088] random: nonblocking pool is initialized
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 803285896600881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[9] has core num=15
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[44] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-5,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-4,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-5,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1375 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 803285896600881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[5] speed=6240
get fan[2] speed=4440
get fan[5] speed=6240
get fan[2] speed=4440
get fan[5] speed=6240
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[9] has core num=15
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[44] has core num=2
miner total rate=13741GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-5
Chain:5 base freq=662
Asic[ 0]:662 
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662 
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662 
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662 
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662 
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662 
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662 
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662 
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:5 max freq=662
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-4
Chain:6 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:7 max freq=631
Chain:7 min freq=631


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-5
Chain:5 base freq=662
Asic[ 0]:643 
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643 
Detect a bad chip=9 on chain[5], fixed to 400M
Asic[ 9]:662 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643 
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643 
Asic[25]:643 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650 
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 
Chain:5 max freq=662
Chain:5 min freq=643

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-4
Chain:6 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:7 max freq=631
Chain:7 min freq=631

max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,-5,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
Chain[J6] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[5] chip[244] local:33 remote:36 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,-4,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-4 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
Chain[J7] use default temp chip[244] 
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9C)
Warning: Chain[6] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[6] chip[244] local:-64 remote:0 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=00
Chain[J8] PIC temp offset=62,-5,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[7] chip[244] local:34 remote:37 offset:28 
Chain[J8] chip[244] get middle temp offset=28 typeID=55
single board rate=4574 voltage limit=890 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 890
single board rate=4531 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
single board rate=4530 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
Chain[J6] set working voltage=870 [125]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=912	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=643	freq[01]=643	freq[02]=643	freq[03]=643	freq[04]=643	freq[05]=643	freq[06]=643	freq[07]=643	
freq[08]=643	freq[09]=662	freq[10]=643	freq[11]=643	freq[12]=643	freq[13]=643	freq[14]=643	freq[15]=643	
freq[16]=643	freq[17]=643	freq[18]=643	freq[19]=643	freq[20]=643	freq[21]=643	freq[22]=643	freq[23]=643	
freq[24]=643	freq[25]=643	freq[26]=650	freq[27]=650	freq[28]=650	freq[29]=650	freq[30]=650	freq[31]=650	
freq[32]=650	freq[33]=650	freq[34]=650	freq[35]=650	freq[36]=650	freq[37]=650	freq[38]=650	freq[39]=650	
freq[40]=650	freq[41]=650	freq[42]=650	freq[43]=650	freq[44]=650	freq[45]=650	freq[46]=650	freq[47]=650	
freq[48]=650	freq[49]=650	freq[50]=650	freq[51]=650	freq[52]=650	freq[53]=650	freq[54]=650	freq[55]=650	
freq[56]=650	freq[57]=650	freq[58]=650	freq[59]=650	freq[60]=650	freq[61]=650	freq[62]=650	

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26333
last_nonce_num:41604
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=912	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=631	freq[01]=631	freq[02]=631	freq[03]=631	freq[04]=631	freq[05]=631	freq[06]=631	freq[07]=631	
freq[08]=631	freq[09]=631	freq[10]=631	freq[11]=631	freq[12]=631	freq[13]=631	freq[14]=631	freq[15]=631	
freq[16]=631	freq[17]=631	freq[18]=631	freq[19]=631	freq[20]=631	freq[21]=631	freq[22]=631	freq[23]=631	
freq[24]=631	freq[25]=631	freq[26]=631	freq[27]=631	freq[28]=631	freq[29]=631	freq[30]=631	freq[31]=631	
freq[32]=631	freq[33]=631	freq[34]=631	freq[35]=631	freq[36]=631	freq[37]=631	freq[38]=631	freq[39]=631	
freq[40]=631	freq[41]=631	freq[42]=631	freq[43]=631	freq[44]=631	freq[45]=631	freq[46]=631	freq[47]=631	
freq[48]=631	freq[49]=631	freq[50]=631	freq[51]=631	freq[52]=631	freq[53]=631	freq[54]=631	freq[55]=631	
freq[56]=631	freq[57]=631	freq[58]=631	freq[59]=631	freq[60]=631	freq[61]=631	freq[62]=631	

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25859
last_nonce_num:41598
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=912	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=631	freq[01]=631	freq[02]=631	freq[03]=631	freq[04]=631	freq[05]=631	freq[06]=631	freq[07]=631	
freq[08]=631	freq[09]=631	freq[10]=631	freq[11]=631	freq[12]=631	freq[13]=631	freq[14]=631	freq[15]=631	
freq[16]=631	freq[17]=631	freq[18]=631	freq[19]=631	freq[20]=631	freq[21]=631	freq[22]=631	freq[23]=631	
freq[24]=631	freq[25]=631	freq[26]=631	freq[27]=631	freq[28]=631	freq[29]=631	freq[30]=631	freq[31]=631	
freq[32]=631	freq[33]=631	freq[34]=631	freq[35]=631	freq[36]=631	freq[37]=631	freq[38]=631	freq[39]=631	
freq[40]=631	freq[41]=631	freq[42]=631	freq[43]=631	freq[44]=631	freq[45]=631	freq[46]=631	freq[47]=631	
freq[48]=631	freq[49]=631	freq[50]=631	freq[51]=631	freq[52]=631	freq[53]=631	freq[54]=631	freq[55]=631	
freq[56]=631	freq[57]=631	freq[58]=631	freq[59]=631	freq[60]=631	freq[61]=631	freq[62]=631	

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25846
last_nonce_num:41603
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=172 total_tv_end_sys=173
restartNum = 2 , auto-reinit enabled...
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000 
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000 
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000 
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000 
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000 
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000 
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=6040.02 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=6040.17 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000 
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000 
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000 
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[02]=6040.020000
Asic[26]=6040.170000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=65
Chain[5] Chip[62] middle Temp=74
Special fix Chain[5] Chip[62] middle Temp = 80
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[6] Chip[62] local Temp=0
read failed on Chain[6] Chip[62] middle Temp old value:15
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
Chain[7] Chip[62] local Temp=67
Chain[7] Chip[62] middle Temp=81
Special fix Chain[7] Chip[62] middle Temp = 82
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

[fanatic26]

Everything else looks pretty good from what I am seeing. Get that network cable swapped out, maybe aget a different port on the router side and lets see if it hashes.