Pietdagamer (OP)
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 29, 2013, 07:03:07 PM |
|
I'm curious if my I have a high or low kH/s. Please post your kH/s here and the specs of your mining rig.
(I'm mining an altcoin with a GTX 760 at an average of 200 kH/s)
|
|
|
|
xconder
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 29, 2013, 07:06:31 PM |
|
Im mining at 700 kh/s.
And also use my laptop for testing with cpu mining coins.
|
|
|
|
yugpun
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 29, 2013, 07:14:31 PM |
|
I have an average of 70 kh/s. I usually mine alt coins. I did not mine bitcoins.
|
|
|
|
pattmarr
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 29, 2013, 07:56:28 PM |
|
Im at 880 kh/s with a R9 290, was quite an upgrade from a GTX 680 that i had before which only had around 220
|
|
|
|
Olly_K
|
|
December 29, 2013, 07:58:09 PM |
|
~400 kH/s with a 780 GTX and cudaminer
|
|
|
|
cyruss322
Newbie
Offline
Activity: 37
Merit: 0
|
|
December 29, 2013, 08:00:31 PM |
|
I have 2400 khs. an r9 270x,7970,7950, 6950, and a 7850. all the cards are pretty reliable. I obviously do scrypt mining, mostly DOGE. but right now I'm messing around with new scrypt coins that have come out recently. I do have an interesting tidbit, my sapphire 7950 fan bearing went bad and it started making terrible noises. While I was waiting on a new fan to come in from ebay, I let the fan continue to run at full blast. to my suprise, the fan motor (not the gpu) got so hot that one of the blades got hot enough that the plastic blade flung off ! luckily I had a spare cpu fan to put in front of it while I removed the bad fan and waited only 2 more days for the new fan to come in hahah !
|
|
|
|
Armoks
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 29, 2013, 08:01:03 PM |
|
So I recently bought a new Gigabite Radeon R9 270 for around $230. With proper config, I reached 450 kH/s.
"setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS=1
cgminer --scrypt -o xxx -u xxx -p xxx -I 19 -g 1 -w 512 --thread-concurrency 15232 --temp-target 63 --temp-cutoff 85 --lookup-gap 2 --gpu-memdiff 0"
My question is, should I believe my cgminer or pool stats with kH/s?
|
|
|
|
Aguiler
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 29, 2013, 08:04:16 PM |
|
I have one R9 280x and mining at 1050 core/1500 memory 384 worksize 20992 thread concurency 20 agression cgminer 3.6.6 - 735 Kh/s
|
|
|
|
pattmarr
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 29, 2013, 08:05:03 PM |
|
So I recently bought a new Gigabite Radeon R9 270 for around $230. With proper config, I reached 450 kH/s.
"setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS=1
cgminer --scrypt -o xxx -u xxx -p xxx -I 19 -g 1 -w 512 --thread-concurrency 15232 --temp-target 63 --temp-cutoff 85 --lookup-gap 2 --gpu-memdiff 0"
My question is, should I believe my cgminer or pool stats with kH/s?
Your cgminer will have a more accurate representation of what you are mining at. You would be able to obtain more kh's with intensity on 20 but you would have to change other settings to accommodate it so no HW errors occur.
|
|
|
|
krazey
Newbie
Offline
Activity: 28
Merit: 0
|
|
December 29, 2013, 08:15:11 PM |
|
about 8600 kh/s with a R9 290. i highly recommned this card!
|
|
|
|
Olly_K
|
|
December 29, 2013, 08:16:00 PM |
|
about 8600 kh/s with a R9 290. i highly recommned this card!
overclocked much
|
|
|
|
Kenshin
|
|
December 29, 2013, 08:17:06 PM |
|
3960 KH/s
|
|
|
|
JuAnAuJ69
Newbie
Offline
Activity: 20
Merit: 0
|
|
December 29, 2013, 08:36:24 PM |
|
Mining with a 7950, I can't make it go over 500Kh/s :-(
|
|
|
|
think_alien
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 29, 2013, 09:16:19 PM |
|
mine are 7970: 625kh/s 900mhz core 1375mhz mem 70c temp --intensity 13 --shaders 2048 --thread-concurrency 8192 -g 2 --lookup-gap 2 --vectors 1 --temp-cutoff 80 6950: 330kh/s 870mhz core 1250mhz mem 60c temp --intensity 13 --shaders 1408 --thread-concurrency 6144 -g 1 --lookup-gap 2 --vectors 1 --temp-cutoff 80 Fx-4100: about 500kh/s on quark, 4.4Ghz core clock 40c temp
System spec: CPU fx-4100, 4.4GHz x22 multi 40c full load (Corsair H40 CPU cooler) Mobo: Asus m5a97 Evo 38c temp Bus speed: 200mhz FSB 2200mhz NB: 2400mhz Mem: 16gb 1600mhz 11-11-11-32 Primary hard drive: 128GB PCI-E SSD Raid 0 PSU: Corsair GS700 (700watt)
|
|
|
|
nastybit
Newbie
Offline
Activity: 42
Merit: 0
|
|
December 29, 2013, 09:18:09 PM |
|
Mining at 630kh/s with the only gigabyte 7950 left. Already sold all my miners a few months ago, not sure that was the right choice
|
|
|
|
StopSmoking
Newbie
Offline
Activity: 11
Merit: 0
|
|
December 29, 2013, 09:19:43 PM |
|
800 kh/s, very annoying compare to other miners here
|
|
|
|
J4bberwock
|
|
December 29, 2013, 09:35:41 PM |
|
around 9000Kh/s with 5850x3,5870x8, 5970x4 7870x2 and R9 270X x2 assembled on 2x ASROCK 970 extreme4 and one ASROCK 990 FX extreme4 plus a few old motherboards only accepting 2 graphic cards Powered by 3x Antec TPQ1200, one Antec TPQ 850, one Antec HCG850 and one Antec HCG900
Waiting for one 970 extreme4 to put on 3x 5850 that are waiting to hash
BTW, it's hot in my room, even with the window half open in winter.
|
|
|
|
AGSTeixeira
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 29, 2013, 10:08:31 PM |
|
750KH/s @ Asus 280x Direct CU2 TOP
|
|
|
|
Johnnydoge
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 29, 2013, 10:24:50 PM |
|
A whopping 580khash with 2x gtx 670's. Even with the improvement with cudaminer, it's not enough to be profitable mining anything unless it's a new coin on day one.
|
|
|
|
AGSTeixeira
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 29, 2013, 10:28:11 PM |
|
around 9000Kh/s with 5850x3,5870x8, 5970x4 7870x2 and R9 270X x2 assembled on 2x ASROCK 970 extreme4 and one ASROCK 990 FX extreme4 plus a few old motherboards only accepting 2 graphic cards Powered by 3x Antec TPQ1200, one Antec TPQ 850, one Antec HCG850 and one Antec HCG900
Waiting for one 970 extreme4 to put on 3x 5850 that are waiting to hash
BTW, it's hot in my room, even with the window half open in winter.
Well you dont need a heater in the winter!!
|
|
|
|
|