[Sold Out] ASICMiner Cubes 30gh-38gh/s - USA .25 BTC - 4+ orders Free Shipping

[CrazyGuy]

All orders before cutoff have been shipped and tracking sent. Any new orders for verified cubes will be shipped Thursday due to New Years. Through testing, we've found a few units only capable of low clock. If you are interested in a low clock unit, please send .75 BTC and PM your preference.

Can these "low clock" units do at least 32 GH/s as usual?

Yes

[visdude]

All orders before cutoff have been shipped and tracking sent. Any new orders for verified cubes will be shipped Thursday due to New Years. Through testing, we've found a few units only capable of low clock. If you are interested in a low clock unit, please send .75 BTC and PM your preference.

Can these "low clock" units do at least 32 GH/s as usual?

Yes

OK. Thanks.

[CrazyGuy]

We've built up a good amount of 38gh/s verified units, and a few 32gh/s units. All orders up to midnight will be shipped tomorrow. Hashy new year!

[novymivo]

We've built up a good amount of 38gh/s verified units, and a few 32gh/s units. All orders up to midnight will be shipped tomorrow. Hashy new year!

verified for 2 hours ?
Don't by funny OP.
My cube ran perfect for 2 weeks on high clock, after that something wrong began.
In my private opinion, Cube is too expensive, risky investment right now.
Good luck anyway .
...and that clicking noise.....

[CrazyGuy]

We've built up a good amount of 38gh/s verified units, and a few 32gh/s units. All orders up to midnight will be shipped tomorrow. Hashy new year!

verified for 2 hours ?
Don't by funny OP.
My cube ran perfect for 2 weeks on high clock, after that something wrong began.
In my private opinion, Cube is too expensive, risky investment right now.
Good luck anyway .
...and that clicking noise.....

My first batch cube has been running on high with no issues for almost a month.

[CrazyGuy]

All orders shipped. New orders placed before midnight will be shipped Friday.

[CrazyGuy]

Prices updated for high verified and low only units. Those who have paid a higher price and still not received their unit, please contact me for a refund of the difference.

[Powell]

Sent ya PM if you can get a high clock out tomorrow.

[eoakland]

Hi Crazy, happy new year!  I have PM'd you per your advert to get a price reduction difference.  thank you

[CrazyGuy]

All orders up to this point have been dropped off at the Post office.

[eoakland]

hi crazy, I received my cube a few hours ago, and I am having difficulty getting this one configured.  I have done this several times before...so it's a bit weird....I cannot access the configuration setup page on 192.168.1.254:8000.  when this cube was ran for 2 hours on your end to verify the highclock...was the ip configuration left stock or was it changed...or does that even matter ?  is there a way to reset ?

[kfactor]

eoakland, I had the same issue.. couldn't find the IP or even sniff it.

Just do a hard reset and you'll find it at 192.168.1.254.

There is a small hole next to the red LED on the back. Depress switch inside with a paper clip for a sec or two (LED will flash) and you're good to go  

[eoakland]

thank you. PM sent

[CrazyGuy]

hi crazy, I received my cube a few hours ago, and I am having difficulty getting this one configured.  I have done this several times before...so it's a bit weird....I cannot access the configuration setup page on 192.168.1.254:8000.  when this cube was ran for 2 hours on your end to verify the highclock...was the ip configuration left stock or was it changed...or does that even matter ?  is there a way to reset ?

We reset the cubes after testing, but it's possible it was missed on yours. Try a quick press of the reset button and see if it comes up. If not, try holding it down for 10 seconds before letting go. I'm not sure it makes a difference but it may be a hard reset vs soft.

[DrunkenSailor]

Payment and PM sent.

Thanks!

[Megabit monster]

Prices updated for high verified and low only units. Those who have paid a higher price and still not received their unit, please contact me for a refund of the difference.

I still have not received my unit and I paid .89. Can I please get a refund of the difference, or can you keep the refund and I send the difference in BTC for another high clock unit?

[andyatcrux]

hi crazy, I received my cube a few hours ago, and I am having difficulty getting this one configured.  I have done this several times before...so it's a bit weird....I cannot access the configuration setup page on 192.168.1.254:8000.  when this cube was ran for 2 hours on your end to verify the highclock...was the ip configuration left stock or was it changed...or does that even matter ?  is there a way to reset ?

We reset the cubes after testing, but it's possible it was missed on yours. Try a quick press of the reset button and see if it comes up. If not, try holding it down for 10 seconds before letting go. I'm not sure it makes a difference but it may be a hard reset vs soft.

I wish I read this 7 hours ago. I have been going nuts trying to figure out how to connect to the config page. Hopefully this works. I have done every step outlined in the forums to a T.

[andyatcrux]

  The reset worked to get the configuration page up.

[jml25]

Yeah, mine was set to .200, only saw it because it was on the same MAC as the wireless bridge I had it running behind.

Mine's running great for going on 24 hours. Thanks crazyguy!

[CrazyGuy]

Yeah, mine was set to .200, only saw it because it was on the same MAC as the wireless bridge I had it running behind.

Mine's running great for going on 24 hours. Thanks crazyguy!

Thanks guys, I'll make sure to notify future customers to always hit the reset button first to save some potential frustration.