freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 06, 2014, 12:35:44 PM Last edit: January 11, 2014, 09:10:06 AM by freetrax |
|
LAST FIRMWARE easy overclock: 20131229 with cgminer 3.9.0 Support is available in French and English only. UPDATE AND CUSTOM FOR 300GH/S BOX: ATX POWER : more 1250W (i use for test http://ocz.com/consumer/psu/zx-series-850w-1250w-power-supply) CGMINER CONFIGURATION just change : Miner Count(Default: 24) : 16 -> 24 (because one blade is 8 , 8*3 = 24 ! Chip Frequency 1300Mhz = 300GH/S Chip Frequency 1350Mhz = 315GH/S NEVER RUN MORE 1350Mhz with 1250W or your destroy atx power, AS YOUR RISK you can run more than 1400Mhz but void warranty and you need to change atw power for more 1250W PERFORMANCE TEST running with last firmware version and box 200GH/s:I testing 4 units in my office. Chip Frequency 1300Mhz = 205GH/S – Power consummation : 850W Chip Frequency 1400Mhz = 220GH/S – Power consummation : 920W Chip Frequency 1500Mhz = 239GH/S – Power consummation : 1000W AS YOUR RISK you can run more than 1400Mhz but void warranty . If you run more 1500Mhz you can change atx power to 1250W. TECHNICAL & PARAMETERS for 2 blades box : IP address is write to box STATUS -> CGMINER CONFIGURATION :
Change pool information Avalon Chip(Default: 110nm) : Select 55nm Chip Frequency(Default: 300) : Select 1400 (300 is for 110nm avalon chip) Miner Count(Default: 24) : 16 API Allow(Default: W:127.0.0.1) : W:192.168.1.0/24,W:127.0.0.1/24 Target Temperature : 60 Overheat Cut Off Temperature : 70 More Options(Default: --quiet) : --quiet SYSTEM -> SYSTEM Change Hostname and TimeZone SYSTEM -> SCHEDULED TASKSIf you need to system restart every 45 min or other Write : 45 * * * * shutdown -r now ALL PICTURE AVAILABLE HERE : https://drive.google.com/folderview?id=0B0PEh6htZ4KAZm1fcTFMNHhwRkE&usp=sharingOr http://postimg.org/my.php?gallery=h7b4bieALL SCREENSHOOT IS NOT EDIT, you can see a data/time and informations ! VIDEO : ON VIDEO YOU SEE 300GH/S is normal because i perform a test with 3 blades. I selling same box but with 2 blades, but is very easy to made 3 blades in one box, just change atx power to 1250w or more and change Miner Count(Default: 24) : 24. http://youtu.be/1QvC6SSYebU
|
|
|
|
|
|
|
There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, but full nodes are more resource-heavy, and they must do a lengthy initial syncing process. As a result, lightweight clients with somewhat less security are commonly used.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 06, 2014, 04:38:41 PM Last edit: January 17, 2014, 07:25:11 AM by freetrax |
|
START SHIPPING : 14/01/2014 - 16/01/2014
Thank's for you order :
ORDER LIST : update every day
ORDERS QTY Process
SHIPPING 15/01/2014 BOX WITH POWER ex3ltc(web) 5 Paid (price update 2.5btc - regulation 0.75 btc) old price SHIPPING 15/01/2014 BOX WITH POWER rimbeler7(web) 1 Paid (price update 2.5btc - regulation 0.45 btc) old price SHIPPING 15/01/2014 BOX WITH POWER private (forum) 3 Paid (price update 2.5btc - regulation 0.15 btc) old price SHIPPING 15/01/2014 BOX WITH POWER EbayContact 5 Paid SHIPPING 15/01/2014 BOX WITH POWER gen7841 (web) 2 Paid SHIPPING 16/01/2014 BOX WITHOUT POWER private (forum) 10 Paid SHIPPING 16/01/2014 BOX WITH POWER johng(forum) 1 Paid SHIPPING 16/01/2014 BOX WITHOUT POWER ebr74(web) 7 Paid SHIPPING 16/01/2014 BOX WITH POWER maxximus007(forum) 2 Paid SHIPPING 16/01/2014 BOX WITHOUT POWER dang63 1 Paid SHIPPING 16/01/2014 BOX WITHOUT POWER pugano 1 Paid
|
|
|
|
gnar1ta$
Donator
Hero Member
Offline
Activity: 798
Merit: 500
|
|
January 06, 2014, 06:12:19 PM |
|
Are these the same thing btmine is selling for 2.2BTC?
|
Losing hundreds of Bitcoins with the best scammers in the business - BFL, Avalon, KNC, HashFast.
|
|
|
WinterParker
|
|
January 06, 2014, 08:45:05 PM |
|
Hey I ill take 1. Sending BTC
|
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 07, 2014, 07:45:08 AM |
|
Hey I ill take 1. Sending BTC
Hi, price is update because a bitcoin is up price now is 2.5BTC You can send payement to my adresse : 15UzpUpp7i39QGj3VDanhFfvgxMSwkz8Qi Thank's
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 07, 2014, 09:31:01 AM |
|
is it possible to clarify exactly what is on offer here?
Hi,preshpresh i'm reseller of avalon asic gen2 , i selling avalon 200GH/s box and other part of avalon (blade gen2 ,atx power board, controler ...) and i offert a strong warranty and support in world (support and warranty is based in France). if you still have questions do not hesitate to ask the following
|
|
|
|
spiccioli
Legendary
Offline
Activity: 1378
Merit: 1003
nec sine labore
|
|
January 07, 2014, 12:15:25 PM |
|
is it possible to clarify exactly what is on offer here?
Hi,preshpresh i'm reseller of avalon asic gen2 , i selling avalon 200GH/s box and other part of avalon (blade gen2 ,atx power board, controler ...) and i offert a strong warranty and support in world (support and warranty is based in France). if you still have questions do not hesitate to ask the following Hi freetrax, do I read it correctly that each unit is using 850W and delivers 200 GH/s ? spiccioli
|
|
|
|
jacoo
|
|
January 07, 2014, 12:17:17 PM |
|
Hi Can you upload short video with running machine? thanks
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 07, 2014, 01:13:14 PM |
|
Hi Can you upload short video with running machine? thanks
Hi,jacoo Yes i can made a video now and upload in few hours.
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 07, 2014, 01:40:03 PM |
|
Hi Can you upload short video with running machine? thanks
You can see video here http://youtu.be/1QvC6SSYebUPS : ON VIDEO YOU SEE 300GH/S is normal because i perform a test with 3 blades. I selling same box but with 2 blades, but is very easy to made 3 blades in one box, just change atx power to 1250w or more and change Miner Count(Default: 24) : 24.
|
|
|
|
jacoo
|
|
January 07, 2014, 01:46:39 PM |
|
Hi Thanks for that. Will check when back home. Regards
|
|
|
|
jacoo
|
|
January 07, 2014, 10:06:36 PM |
|
way to loud Shame, becouse it is a good deal
|
|
|
|
Gologuzan
|
|
January 08, 2014, 06:10:46 AM |
|
hi, what would be the price for one extra blade? and is it "plug and play". like just plug in blade(and stronger PSU) and it adds hash to miner? or do i have to buy extra pdu/control unit? way to loud Shame, becouse it is a good deal bro buy xsilence/coolermaster/noctua fan/fans and you'll listen silence....
|
|
|
|
jacoo
|
|
January 08, 2014, 06:48:08 AM |
|
Do you think, that changing fans will reduce loudness? ?
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 08, 2014, 09:01:27 AM |
|
Hi, i update price without power atx. About sound i mad video in server room who are already very noisy and i use overclock mode (fan working 100% every time) NEVER change fan but you can change parameter can easily change the configuration cgminer . Have nice day
|
|
|
|
Green Samurai
|
|
January 08, 2014, 09:11:16 AM |
|
Can You send it from France to Poland, not direct from China? If Yes - for how much?
Thanks.
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 08, 2014, 09:53:00 AM |
|
Can You send it from France to Poland, not direct from China? If Yes - for how much?
Thanks.
Hi, i can send directly to factory (china to poland) that's why I can offer the shipping costs. I have inspector (working for my society) in china which controls the sending and quality.
|
|
|
|
kmarei
Newbie
Offline
Activity: 40
Merit: 0
|
|
January 08, 2014, 12:00:52 PM |
|
Does it only need 12 volt power from the power supply? Because I'd rather use server power supplies, I have some HP ones that can put out 100amps on the 12v line I know the bitmain antminer only taps the 12v line, no 3.3v or 5v needed
|
|
|
|
Xer0
|
|
January 08, 2014, 01:39:51 PM |
|
can btmine confirm you by posting here? and the payment address like bitmain does
|
|
|
|
miter_myles
|
|
January 08, 2014, 01:50:00 PM |
|
can btmine confirm you by posting here? and the payment address like bitmain does
This. Being new to the forum offering a group buy.. really need some vetting/verification before warm fuzzies are issued
|
BTC - 1D7g5395bs7idApTx1KTXrfDW7JUgzx6Z5 LTC - LVFukQnCWUimBxZuXKqTVKy1L2Jb8kZasL
|
|
|
cannachris
Sr. Member
Offline
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
|
|
January 08, 2014, 01:55:34 PM |
|
can btmine confirm you by posting here? and the payment address like bitmain does
That would be awesome! Then you can put me down for one.
|
|
|
|
mikep2012
|
|
January 08, 2014, 03:59:22 PM |
|
can btmine confirm you by posting here? and the payment address like bitmain does
why should btmine confirm him? he is selling other stuff - not related to btmine, i think.
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
|
January 08, 2014, 08:37:27 PM |
|
Can you specify what PSU comes w/ it ... is it 110/220v capable? Brand / model Also, willing to accept escrow?
|
|
|
|
elchorizo
|
|
January 09, 2014, 01:03:46 AM |
|
Payment sent for 1 unit, email sent to your email address as well.
|
BTC: 1Chorizo6WNabZxVfQyGtvF4JiRt7Hexxb LTC: Lchorizoy8ck7Arbby8LDnw5wAmi8h6Hzb
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 09, 2014, 07:55:01 AM |
|
Can you specify what PSU comes w/ it ... is it 110/220v capable? Brand / model Also, willing to accept escrow?
Hi , psu in 110 / 220V compatible, is greatwall power supply you can see this power supply to my photo album. If you need more picture i can send to group buy annonce. thank's
|
|
|
|
preshpresh
Member
Offline
Activity: 106
Merit: 10
|
|
January 09, 2014, 08:21:47 AM Last edit: January 09, 2014, 08:37:34 AM by preshpresh |
|
in your OP you offer blades as well as rigs but then state u cannot sell blades separately.
i am confused but would appreciate clarification before making a purchase.
EG - 3 rigs + 3 blades, is this possible?
or 2 rigs and 2 blades...?
presumably u are unable to supply the PSU neccesary for powering 3 or 4 blades?
are these very similar to the bitmine rigs? they seem to have heatsinks on both sides leaveing little room for axtra modules/blades...
|
▶▶ UR TOKEN ◀◀ ═══━┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈━═══ ⓄⓄ UNIVERSAL RECOGNITION TOKEN ⓄⓄ █ █ █
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 09, 2014, 08:39:01 AM |
|
in your OP you offer blades as well as rigs but then state u cannot sell blades separately.
i am confused but would appreciate clarification before making a purchase.
EG - 3 rigs + 3 blades, is this possible?
or 2 rigs and 2 blades...?
presumably u are unable to supply the PSU neccesary for powering 3 or 4 blades?
I'm stuppid I update price list and i not remove old sentence . see picture :
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 09, 2014, 09:12:10 AM |
|
ok thx..
do they come with wifi enabled or is this not possible?
Wifi is not available to this version.
|
|
|
|
Jeffrey
|
|
January 09, 2014, 09:16:02 AM |
|
That noise is such a shame! Makes it (at least in my opinion) not usable for using it in your own house. Too bad.
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 09, 2014, 11:20:54 AM |
|
shame as that limits me to 2 rigs.
so that will be a steep 3.8 each plus need to buy PSUs or are you able to provide ones capable of powering 3 blades?
thx in advance
Power cable blade is include with update kit and with box withoupower supply if you buy box without power supply you can buy atxpower more 1000W for 2 blades and more 1250 if you need add 1 blades (3 blades totals) atx power must be : 6 x pci-e power 8pin + 2 x atx power cable 8pin . normally all supplies 1000w sold on these connectors
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 09, 2014, 01:05:59 PM |
|
hi freetrax.
u supply mining rigs with 1000w PSU but advise buyers to 'buy atxpower more 1000W for 2 blades and more 1250 if you need add 1 blades (3 blades totals)
would you be so kind as to clarify this? especially considering u advise using a 1250w on TWO blades OC'd to >1500Mhz
what is the exact power draw per blade? from UNDERclocked to OVERclocked...
Also why would this be needed???
If you need to system restart every 45 min or other Write : 45 * * * * shutdown -r now
Many Thx Bud & GL with the group sale!!
Hi, edgar Standart use 1 blade power draw ~ 400W For 2 blade with 1300mhz parameter power draw is ~820W For 2 blade with 1500mhz parameter power draw is ~1000W but if you need overclock box more to 1500 mhz you can change atx power . For 3 blade with 1350mhz parameter power draw is ~1260W And parameter to restart every 45min is security if you want to overclock your box. But if not overclock its is useless
|
|
|
|
choose_username
Newbie
Offline
Activity: 14
Merit: 0
|
|
January 09, 2014, 01:50:27 PM |
|
Is the restart to prevent it from overheating?
|
|
|
|
goggles1200
Member
Offline
Activity: 110
Merit: 10
|
|
January 09, 2014, 01:59:02 PM |
|
Are these rigs in house friendly or do they need to be stored in a warehouse? I saw a youtube video on one, sounded like a jet engine. I think my wife would get pist at me if I brought that in the house.
|
|
|
|
bitmutiny
Member
Offline
Activity: 91
Merit: 11
No banking,Only Bitcoin!
|
|
January 09, 2014, 03:43:41 PM |
|
if I purchase today, will it ship tomorrow with rest of orders?
|
|
|
|
mikep2012
|
|
January 09, 2014, 04:07:07 PM |
|
problem: to get 2 boxes with 300GH+ each:
-- solution 1:
2 box blades / no PSU / 2.3 each /total = 4.6 BTC 2 update kit / 1.3 each / total = 2.6 BTC
total: 7.2 BTC
-- solution 2:
3 box blades / no PSU / 2.3 each / total = 6.9
total: 6.9 BTC
question: why to buy update kits? maybe the price should be revised?
|
|
|
|
choose_username
Newbie
Offline
Activity: 14
Merit: 0
|
|
January 09, 2014, 04:12:36 PM |
|
problem: to get 2 boxes with 300GH+ each:
-- solution 1:
2 box blades / no PSU / 2.3 each /total = 4.6 BTC 2 update kit / 1.3 each / total = 2.6 BTC
total: 7.2 BTC
-- solution 2:
3 box blades / no PSU / 2.3 each / total = 6.9
total: 6.9 BTC
question: why to buy update kits? maybe the price should be revised?
If you have the space and funds you better buy 3 units, with 2 blades. Gives you better overclock ability (less power draw, less heat) and better redundancy (if one fails you only lose 33% of your capacity). I think upgrade kit is interesting for people without the room or funds to buy more than one machine.
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 10, 2014, 07:53:57 AM |
|
Hi, i send a little tutorial for update kit in few time . Groupe buy is closed in few hours if you need order is now thank's
|
|
|
|
bitmutiny
Member
Offline
Activity: 91
Merit: 11
No banking,Only Bitcoin!
|
|
January 10, 2014, 10:49:20 PM |
|
I don't understand how this group buy went from 65/100 available to sold out. AND its closed a day earlier than stated on the original post. WTF dude.
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 11, 2014, 09:09:41 AM |
|
I don't understand how this group buy went from 65/100 available to sold out. AND its closed a day earlier than stated on the original post. WTF dude.
Limite for buy is 10/01/2014 then group buy is close and i start shipping ... it's just written in the announcement ! But i not sold 100 pcs I sold 65 units
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 11, 2014, 09:48:48 PM Last edit: January 12, 2014, 01:19:11 PM by pugano |
|
ok this is my first group buy so I would like to ask a few questions seeing how I did pay and I am on the list. 1. will we be getting some sort of setup documentation or is this like plug into your router and figure it out. 2. since I am putting my own power supply in can I get documentation or support on that. 3. and how long does dhl and fedex take to clear US customs? if you know or anybody else does
|
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 13, 2014, 11:28:17 PM |
|
so you start shipping tomorrow when can we get the tracking numbers how long after shipping? and will you be updating the status of the buyers like they do in other threads?
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 13, 2014, 11:53:17 PM Last edit: January 14, 2014, 12:16:33 AM by pugano |
|
would you also be willing to post a picture of the fans I believe there DELTA FANS so that would explain why this thing sounds like they a jet engine. I would like to get a model number to see if there is a silent fan that pushes a similar CFM that isn't so noisy. thanks
|
|
|
|
elchorizo
|
|
January 15, 2014, 03:50:43 AM |
|
Any shipping updates here?
|
BTC: 1Chorizo6WNabZxVfQyGtvF4JiRt7Hexxb LTC: Lchorizoy8ck7Arbby8LDnw5wAmi8h6Hzb
|
|
|
bitterdog
|
|
January 15, 2014, 03:54:25 AM |
|
Anyone get tracking yet?
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 15, 2014, 10:35:06 AM |
|
No tracking yet for this guy.
|
|
|
|
Maxximus007
|
|
January 15, 2014, 10:59:38 AM |
|
Guess we're all waiting on some info and/or tracking..
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 15, 2014, 11:51:33 AM |
|
I sent freetrax an email about tracking numbers.
|
|
|
|
elchorizo
|
|
January 15, 2014, 05:06:51 PM |
|
He emailed me back and said that they should ship within 1 or 2 days and he would email tracking information at that time. I'm already a bit saddened that we have already been lied to about the shipping times.
|
BTC: 1Chorizo6WNabZxVfQyGtvF4JiRt7Hexxb LTC: Lchorizoy8ck7Arbby8LDnw5wAmi8h6Hzb
|
|
|
PaintShopPro6
|
|
January 15, 2014, 05:35:13 PM |
|
I just wanted to give you guys an update. We are experiencing similar behavior over in the btmine group buy.
I honestly believe these companies are working their butts off to fulfill these orders.
A local chip vendor apparently sold some counterfeit secondary chips (not the mining chips) which bricked a bunch of circuit boards in the btmine group buy. One of the members of the btmine team went to shanghai just to get some replacement chips. This could be a contributing factor.
It could also be that there is a lot of sudden demand for relevant computer parts. I did notice that the btmine casing has changed since the early orders.
I think we will receive our units, but I think it will be an extra week, on average, than we all expected. Maybe 2 weeks.
I do like that this group buy in particular has been much more disciplined.
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 15, 2014, 08:37:56 PM |
|
He emailed me back and said that they should ship within 1 or 2 days and he would email tracking information at that time. I'm already a bit saddened that we have already been lied to about the shipping times.
I don't think we were lied to but I think that the suppliers are crappy. As far as I can see our order was placed. And now we are waiting on the manufacturer to live up to there end of the agreement. I just hope we don't end up in btminers situation.
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 15, 2014, 09:01:14 PM |
|
Shipping today 17 box and in few days complete other shipping (2 - 3 days max).
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 15, 2014, 09:16:25 PM |
|
Shipping today 17 box and in few days complete other shipping (2 - 3 days max).
Thanks freetrax any tracking numbers
|
|
|
|
elchorizo
|
|
January 15, 2014, 11:25:50 PM |
|
Shipping today 17 box and in few days complete other shipping (2 - 3 days max).
Awesome, you the man.
|
BTC: 1Chorizo6WNabZxVfQyGtvF4JiRt7Hexxb LTC: Lchorizoy8ck7Arbby8LDnw5wAmi8h6Hzb
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 17, 2014, 11:17:22 AM |
|
thanks for the shipping update
|
|
|
|
Maxximus007
|
|
January 17, 2014, 11:47:52 AM |
|
Great to see that shipping is done for all the rigs! Anyone received a tracking number yet?
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 17, 2014, 01:53:57 PM |
|
I do not have a tracking number but I got an email this morning from freetrax saying he is waiting on them from the factory for dhl
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 17, 2014, 11:52:17 PM |
|
Any tracking number updates
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 18, 2014, 07:47:00 AM |
|
Hi,
dont worry all packets is sending , i waiting a final tracking number by dhl, all units is delivery monday or tuesday. I order 5 units for me and I'm waiting also tracking number !
If i have a tracking number this weekend i send a email with tracking number. sorry for this inconvenience
thank's
|
|
|
|
Maxximus007
|
|
January 18, 2014, 08:04:41 AM |
|
Thank you for the update! Right after the weekend would be great!
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 18, 2014, 11:30:40 AM Last edit: January 18, 2014, 01:09:01 PM by pugano |
|
Great thanks
Also can you post some pictures on how to install the power supply
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 20, 2014, 12:43:31 AM Last edit: January 20, 2014, 01:13:06 AM by pugano |
|
do we have to sign for the miners if it does not arrive tomorrow I will not be able to be home for it to sign?
So if yes I have to sign for it ill have to arrange something.
|
|
|
|
Maxximus007
|
|
January 20, 2014, 12:45:39 PM |
|
Still no tracking numbers, and no communication from freetrax..
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 20, 2014, 01:32:55 PM |
|
I would really like a tracking number my self. I need to know when this thing is going to show up incase I have to sign for it.
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 20, 2014, 03:32:16 PM |
|
so I called both FEDEX and DHL asking if they had any packages scheduled for delivery to my zip code in the USA I had told them I had orderd some computer hardware from china and was not getting a tracking number so both dhl and fedex looked up any shipping to my zip and both came up with nothing. its Monday freetrax can you call your supplier and get tracking numbers. and find out if they really shipped the miners?
|
|
|
|
elchorizo
|
|
January 20, 2014, 05:01:54 PM |
|
Freetrax just gave me my tracking number. You guys should be getting yours shortly.
|
BTC: 1Chorizo6WNabZxVfQyGtvF4JiRt7Hexxb LTC: Lchorizoy8ck7Arbby8LDnw5wAmi8h6Hzb
|
|
|
Maxximus007
|
|
January 20, 2014, 06:35:48 PM |
|
Hi there, happy to say that I just received an email from freetrax with one of my tracking numbers! Great, thanks!
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 20, 2014, 07:59:08 PM |
|
still waiting on mine are any of you guys in the usa and if so can you say where your miners are currently located?
|
|
|
|
Maxximus007
|
|
January 20, 2014, 09:00:30 PM |
|
According to DHL it was picked up today. Hope tomorrow the other will ship. I'm in the EU.
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 20, 2014, 09:04:42 PM |
|
According to DHL it was picked up today. Hope tomorrow the other will ship. I'm in the EU.
thank you for the update so they are not shipping until today and tomorrow now
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 22, 2014, 11:16:32 AM |
|
anybody else get tracking numbers? I am still waiting on mine
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 22, 2014, 12:58:57 PM |
|
anybody else get tracking numbers? I am still waiting on mine
No. Still waiting no updates... What's up?
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 22, 2014, 01:10:59 PM |
|
anybody else get tracking numbers? I am still waiting on mine
No. Still waiting no updates... What's up? Has anyone actually got their equipment yet?
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 22, 2014, 01:12:02 PM |
|
Just don't like being told miner shipped and I have no way to see it. Then finding out miners started shipping Monday not Thursday last week
|
|
|
|
Maxximus007
|
|
January 22, 2014, 01:37:58 PM |
|
I received first shipment today! Have to say that the rig is nice, good quality case, clean build. Some cables were loose due to shipping, but after reconnecting all worked fine. Don't put it in the bedroom, since it will make noise...
Rig is running on 1400 MHz now, and around 220 GH/s, so all is as promised. Don't forget to set ntp pool correctly, otherwise cgminer won't run.
Only downside is the longer than expected lead time, but that seems to be everywhere atm.. Think the factory is just telling freetrax that items have been shipped, but actually it's not..
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 22, 2014, 01:57:56 PM |
|
I received first shipment today! Have to say that the rig is nice, good quality case, clean build. Some cables were loose due to shipping, but after reconnecting all worked fine. Don't put it in the bedroom, since it will make noise...
Rig is running on 1400 MHz now, and around 220 GH/s, so all is as promised. Don't forget to set ntp pool correctly, otherwise cgminer won't run.
Only downside is the longer than expected lead time, but that seems to be everywhere atm.. Think the factory is just telling freetrax that items have been shipped, but actually it's not..
Glad to hear it. I hope we get some setup documentation with this or at least its posted somewhere.
|
|
|
|
elchorizo
|
|
January 22, 2014, 05:13:15 PM |
|
DHL says my unit is "with courier" in my city... so I should have it today, perhaps tomorrow at the latest. So don't sweat it guys, freetrax so far looks totally legit and yes a few extra delays but compared to most sellers here they were very minimal and he has been very good to deal with.
Thumbs up freetrax!
|
BTC: 1Chorizo6WNabZxVfQyGtvF4JiRt7Hexxb LTC: Lchorizoy8ck7Arbby8LDnw5wAmi8h6Hzb
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 22, 2014, 09:17:58 PM |
|
Hi, I'm very busy last day , and i working hard to get a quick delivery, some people have recieve you avalon box, delivery delay its longest but is chinese new year and dhl is very long for sending a final tracking number. I order many machine for me but box for you (group buy) is sending and for me is sending after . The avalon factory is overworked and I especially is no interest you deliver with periods longer For future transaction i order all box and i send directly to my office in france , is better for shipping delay and quality controle. thank's
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 22, 2014, 09:43:33 PM |
|
Hi, I'm very busy last day , and i working hard to get a quick delivery, some people have recieve you avalon box, delivery delay its longest but is chinese new year and dhl is very long for sending a final tracking number. I order many machine for me but box for you (group buy) is sending and for me is sending after . The avalon factory is overworked and I especially is no interest you deliver with periods longer For future transaction i order all box and i send directly to my office in france , is better for shipping delay and quality controle. thank's Thanks for the update freetrax ...(dang63)
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 22, 2014, 10:00:12 PM |
|
Freetrax, Can I get a update on my order? I placed using (dang63)
|
|
|
|
elchorizo
|
|
January 22, 2014, 10:28:38 PM Last edit: January 22, 2014, 11:04:34 PM by elchorizo |
|
My unit arrived! Thumbs up... I'll do some testing and report back here in a few.
Update. The Avalon "blades" of course didn't have the power connectors plugged in but that was easy enough to fix. The unit is up and hashing away at full speed just as freetrax claimed. I had to keep them at 1300 mhz as they are getting a little too warm for my liking at 1400mhz, even with the cover off and a good fan pointing at them. I need to keep the temp in my office down a bit more (or move this unit to the house... perhaps tomorrow).
All in all, everything is exactly as I had hoped and this unit looks very well put together indeed. I hope you guys get your units soon!
|
BTC: 1Chorizo6WNabZxVfQyGtvF4JiRt7Hexxb LTC: Lchorizoy8ck7Arbby8LDnw5wAmi8h6Hzb
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 22, 2014, 11:47:07 PM |
|
My unit arrived! Thumbs up... I'll do some testing and report back here in a few.
Update. The Avalon "blades" of course didn't have the power connectors plugged in but that was easy enough to fix. The unit is up and hashing away at full speed just as freetrax claimed. I had to keep them at 1300 mhz as they are getting a little too warm for my liking at 1400mhz, even with the cover off and a good fan pointing at them. I need to keep the temp in my office down a bit more (or move this unit to the house... perhaps tomorrow).
All in all, everything is exactly as I had hoped and this unit looks very well put together indeed. I hope you guys get your units soon!
yes please report back and if you could please take some pictures of how the power supply hooks up I would be very greatfull.
|
|
|
|
elchorizo
|
|
January 23, 2014, 12:01:10 AM |
|
yes please report back and if you could please take some pictures of how the power supply hooks up I would be very greatfull.
I actually ordered my unit with the great wall power supply. The limited reviews I found on it (amazon) were pretty positive. It is a standard ATX power supply but it has some additional cables to mate up to the Avalon blades. I'm at home and the unit is at the office but freetrax's pictures really show everything.
|
BTC: 1Chorizo6WNabZxVfQyGtvF4JiRt7Hexxb LTC: Lchorizoy8ck7Arbby8LDnw5wAmi8h6Hzb
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 23, 2014, 12:24:29 AM Last edit: January 23, 2014, 02:38:46 AM by pugano |
|
im just worried the 1200w powersupply I have may have an issue due to how it has 1 atx12v 4x4 pin power and 1 eps 12v power instead of 2 atx power I understand they are the same style rail but im worried the connector may have an issue
|
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 23, 2014, 02:41:00 AM |
|
I just need if possible high-resolution photos's of the psu ctrl board and how they interface with the miners. that's it so a side shot and a as best as possible upclose of the psu ctrl board. the psu I have im worried that it wont interface with the psu board due to the config.
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 24, 2014, 11:03:23 AM |
|
Any news on the rest of our tracking numbers?
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 24, 2014, 11:52:26 AM |
|
Nothing. Nada....
|
|
|
|
Maxximus007
|
|
January 24, 2014, 12:06:26 PM |
|
Emailed him, so far no news. Thing is that's close to chinese new year, and after that two week break things are completely different.. Same rig will be about 1 BTC cheaper by then..
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 24, 2014, 01:28:36 PM |
|
If that's that case then he can ship 2 units instead of just 1. He needs to communicate with us on these issues.
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 24, 2014, 10:23:22 PM Last edit: January 25, 2014, 12:26:52 AM by pugano |
|
If that's that case then he can ship 2 units instead of just 1. He needs to communicate with us on these issues.
I agree with communication and if these ship with a huge price drop then yes I would expect the compensation Sent an email this morning about tracking no response. I am getting fairly upset about the lack of communication. Sure he got some out the door but I want my miner. Before difficulty goes nuts
|
|
|
|
Maxximus007
|
|
January 25, 2014, 10:02:01 AM |
|
Just received tracking number! hope this goes for everyone! Will arrive on monday according to Fedex. Have to say that I like the box, so if freetrax organises a new group buy after chinese new year I will consider again..
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 25, 2014, 11:23:33 AM |
|
I got mine also. Thanks free trax
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 25, 2014, 11:48:18 AM |
|
I just received my FedEx tracking number as well...... Thanks freetrax
|
|
|
|
Helnick
Newbie
Offline
Activity: 26
Merit: 0
|
|
January 25, 2014, 10:04:45 PM |
|
are these still available?
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 25, 2014, 10:48:45 PM |
|
freetrax said he will do another group buy soon
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 26, 2014, 12:53:20 PM |
|
Has everyone received their upgrade kits?
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 26, 2014, 05:03:41 PM |
|
I did not order with upgrade
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 27, 2014, 12:06:19 PM |
|
anybody else seeing there package move ? mine said delivery Monday but its not showing anything else no acceptance from fed ex or in transit information at all
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 27, 2014, 01:00:58 PM |
|
My package is just sitting at initiated with no further action....
|
|
|
|
Maxximus007
|
|
January 27, 2014, 02:16:06 PM |
|
Mine (Fedex) moved from delivery today to tomorrow.. Perhaps Fedex issue?
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 27, 2014, 03:09:10 PM |
|
Called fedex they said they have not received packages yet
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 27, 2014, 04:39:54 PM |
|
Mine now have no delivery date....
|
|
|
|
NineLives
|
|
January 27, 2014, 10:02:25 PM |
|
In Hong Kong, any tracking number given can look live. This does not mean the unit has been dispatched. I'm not saying this wont be dispatched but giving tracking numbers doesn't mean the shipping company has it in their hands.
|
|
|
|
Maxximus007
|
|
January 28, 2014, 08:08:19 AM |
|
Well my second unit is scheduled for delivery today (pickup delayed from friday -> monday), so seems Fedex is having issues shipping on time.
Was wondering how the unit runs for everybody? Do you run overclocked? How is it with HW errors? Running 1400 MHz at times hash rate seems to stall, dropping back to 40 GH/s. So a cron reboot seems needed. It does get hot, ambient now is around 15 degrees C, so heat dissipation should be optimal.
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 28, 2014, 06:49:26 PM |
|
My tracking is showing that my avalon is sitting on Lantau island in hk. Good news is fedex has it bad news Lantau island is like a fed ex black hole for customs :/
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 28, 2014, 11:50:38 PM |
|
anybody get there unit today?
|
|
|
|
Maxximus007
|
|
January 29, 2014, 08:02:27 AM |
|
Received my other unit. Has an additional fan (so 3 in total), and drill holes for 2 additional cards. Assembly was fine, runs out of the box. Runs stabler than the first one, perhaps because of the later production date.
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 29, 2014, 07:36:11 PM |
|
Got my unit and is hashing away glad it was easy to setup. The unit says it does have wifi on board. I may play with that later thanks freetrax I left feedback for you in your trust.
|
|
|
|
freetrax (OP)
Full Member
Offline
Activity: 206
Merit: 100
www.monoeci.io
|
|
January 29, 2014, 09:11:09 PM |
|
Hi,
thank's all customers for your purchase, all customers have recieve your box, update kit is send today from my office in france. If you have buy update kit you have recieve email with tracking number (DHL or Fedex).
For next groupe buy I waiting next to chinese new year and I go to chinese factory for found a better product and better price for open a new group buy.
But, I you have question contact me by email
Have nice day , thank's
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 30, 2014, 01:41:24 AM |
|
Does anyone have any idea how to hook up your psu to these units.... I wasn't smart enough to buy one with it in there.
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 30, 2014, 02:51:19 AM |
|
if you look on the psu control board there are 6 sata and 2 eps and then your regular atx mobo hookup just use them as they are labled
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
January 31, 2014, 12:09:14 PM |
|
I noticed I was the only one who bumped freetrax's trust please if you bought a miner give him some feedback. It's about community support for the honest.
|
|
|
|
pugano
Newbie
Offline
Activity: 48
Merit: 0
|
|
February 02, 2014, 04:09:56 AM |
|
Since the members in this thread send no love. Please contact me if you worrie about freetrax's reputation. He is a good guy I risked 2.25 btc on this miner and I can take time/date stamped Picts for you of my miner. He is legit but his supplier lies to him on time frames. He did us right. He won't screw you. I hate people who are scumbags I will not back them. My personal reputation is I wrote the tutorial on how to over clock the block erupters and a large quantity of you made money off me on eBay. Check my profile to prove this fact.
Best of luck all. Freetrax's good dude
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
February 08, 2014, 11:20:38 PM |
|
I received a bad data cable with my upgrade kit. Does anyone know where I could get a replacement?
|
|
|
|
|