Best r9 280x

[Billyboy402]

btw , if your thinking of getting asus cards , make sure there on riser ,

i dont like the layout of the bottom heat pip . it sit on top of the Z87 chip , or sata plugs .....also the big 8 mm pip get hot and is soo close to the bother board

[dogecoin168]

Hi from Australia.
This is my setup. I have 2 rigs, each with 4 Gigabyte 280X underclocked to 0.950v.
Each rig averages 840watts and has an average WU rate of 2350/m. Gpu engine 910. Mem clock 1500 TC 8192
Getting 2.8WU per watt. I think its set up correctly for efficient mining. Would appreciate any opinions, as im
new to mining, only started 3 weeks ago.

[MinerP]

Hi from Australia.
This is my setup. I have 2 rigs, each with 4 Gigabyte 280X underclocked to 0.950v.
Each rig averages 840watts and has an average WU rate of 2350/m. Gpu engine 910. Mem clock 1500 TC 8192
Getting 2.8WU per watt. I think its set up correctly for efficient mining. Would appreciate any opinions, as im
new to mining, only started 3 weeks ago.

what is WU? and what is your hash rate per card? what os are you using?

[fra55]

btw , if your thinking of getting asus cards , make sure there on riser ,

i dont like the layout of the bottom heat pip . it sit on top of the Z87 chip , or sata plugs .....also the big 8 mm pip get hot and is soo close to the bother board

Are you talking about V1 or V2 of Asus cards?

[1976]

ASUS R9280X-DC2-3GD5 3GB GDDR5 DVI-I DVI
This is my choice.

[tr0ubles0me]

https://i.imgur.com/HnN8QBQ.jpg?1

2 x MSI R9 280x GAMING 3G OC Edition with karloth's latest cgminer (20140324):

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://eu.clevermining.com:3333",
		"user" : "",
		"pass" : ""
	},
	{
		"url" : "stratum+tcp://eu.wafflepool.com:3333",
		"user" : "",
		"pass" : ""
	}
]
,
"xintensity" : "4,4",
"vectors" : "1,1",
"worksize" : "256,256",
"lookup-gap" : "2,2",
"gpu-threads" : "2,2",
"thread-concurrency" : "8193,8193",
"gpu-engine" : "1110-1110,1110-1110",
"gpu-fan" : "0-90,0-90",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0,0",
"gpu-powertune" : "20,20",
"gpu-vddc" : "0.000,0.000",
"temp-cutoff" : "95,95",
"temp-overheat" : "85,85",
"temp-target" : "75,75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "1",
"failover-only" : true,
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "4",
"log-dateformat" : "0",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"temp-hysteresis" : "4",
"worktime" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[fra55]

A good website where to purchase VGA, risers, extension cables...? I already checked on Amazon and ebay but they look a bit too expensive

[Billyboy402]

btw , if your thinking of getting asus cards , make sure there on riser ,

i dont like the layout of the bottom heat pip . it sit on top of the Z87 chip , or sata plugs .....also the big 8 mm pip get hot and is soo close to the bother board

Are you talking about V1 or V2 of Asus cards?

All of them . Any card with heatpipe that up and around

I found gigabytes of the best cards . There hear pipe travel along the Pcb .