|
January 11, 2014, 06:50:23 PM |
|
Hello,
I am new to bitcoin mining and decided to give it a try using an AntMiner U1 on my Debian i386 box. I followed all the instructions and hints from this forum, installed cgminer from various git clones, also tried with bfgminer but it just won't work. AntMiner is OK because I also tested it on a windows machine and worked according to the instructions (reinstall driver etc.) but I can not make it work under Debian.
When I plug in antminer I get:
[12583524.528102] usb 2-2: new full speed USB device using ohci_hcd and address 2 [12583524.744055] usb 2-2: New USB device found, idVendor=10c4, idProduct=ea60 [12583524.744060] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [12583524.744063] usb 2-2: Product: CP2102 USB to UART Bridge Controller [12583524.744066] usb 2-2: Manufacturer: Silicon Labs [12583524.744068] usb 2-2: SerialNumber: 0001 [12583524.744208] usb 2-2: configuration #1 chosen from 1 choice [12583525.209733] usbcore: registered new interface driver usbserial [12583525.209750] USB Serial support registered for generic [12583525.209778] usbcore: registered new interface driver usbserial_generic [12583525.209781] usbserial: USB Serial Driver core [12583525.252411] USB Serial support registered for cp210x [12583525.252510] cp210x 2-2:1.0: cp210x converter detected
but then when I start cgminer (or bfgminer) I am only receiving: bmsc send golden nonce bmsc recv nonce timeout
And during this time my syslog logs these messages all the time: [12584424.920851] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [12584424.922619] cp210x 2-2:1.0: device disconnected [12584432.680124] cp210x 2-2:1.0: cp210x converter detected [12584432.848120] usb 2-2: reset full speed USB device using ohci_hcd and address 2 [12584433.072155] usb 2-2: cp210x converter now attached to ttyUSB0 [12584438.296197] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [12584438.296505] cp210x 2-2:1.0: device disconnected [12584446.084152] cp210x 2-2:1.0: cp210x converter detected [12584446.260762] usb 2-2: reset full speed USB device using ohci_hcd and address 2 [12584446.472968] usb 2-2: cp210x converter now attached to ttyUSB0 [12584451.693636] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [12584451.693928] cp210x 2-2:1.0: device disconnected [12584459.448127] cp210x 2-2:1.0: cp210x converter detected [12584459.624096] usb 2-2: reset full speed USB device using ohci_hcd and address 2
etc...
What can be wrong? I tried many different cgminer and bfgminer versions with bmsc support and the problem is the same on all of them.. I run cgminer with following command:
cgminer --bmsc-options 115200:20 -o api.bitcoin.cz:8332 -u XXXXX -p XXXXX --bmsc-freq 0781
and bfgminer with:
bfgminer -S antminer:all -o api.bitcoin.cz:8332 -u XXXXXX -p XXXXXX
(the same commands work on windows laptop like a charm - except that I have linux box that is always on and want to use it)
Any clues? Thanx!
|