BE blade v2 setup

[magog45]

I'm having a problem with a blade miner, my network consists of a dsl modem hooked up to a router that is then hooked up to a second router, currently being used as a switch. I have powered the blade using an old atx power supply and it lights up and voltages seem to be ok. I access the blade from my browser but no combination of inputs seems to get the blade hashing. On my network the modem assigns an ip to the router which has its own ip for remote access, the router then assigns ip's to the computers on my network and the second router(switch has its own ip for remote access but isn't assigned one by the router) distributes to the network. Once powered up the network lights on the blade come on, the yellow solid and the green flashing but never connects. Any ideas out there, I'm running linux if that helps.

[pjcltd]

have you setup the Ip address of the V2 blade ?
its default is set to
192.168.1.254

to access the blade you will need to be on the same ip address range

then point your web browser to
192.168.1.254:8000

this should then bring up the V2 blade


when you get the up post a screen shot on here

[magog45]

Ok I have no trouble accessing the blade menu and it has been set to the range accepted by the router.

I'm having no luck inserting a picture but here's the readout that shows on the screen

Current server:stratum.btcguild.com:3333
Chip:0000000000000000000000000000000000

IP:192.168.1.111
Mask:255.255.255.0
Gateway:192.168.1.1
Web port:8000
Primary DNS:192.168.250.1
Secondary DNS:216.211.26.15
Ports:3333,3333
Server Addresses:stratum.btcguild.com,eu-stratum.btcguild.com
user:pass:myworker:123,myworker:123

For the gateway I'm using the access address for the router, the primary dns is the address of the modem and the secondary dns is my isp's dns server. Along the bottom this version has 3 options refresh, switch server and update/restart. the numbers at the top relating to performance are all zeros except for the time.

[pjcltd]

Ok I have no trouble accessing the blade menu and it has been set to the range accepted by the router.

I'm having no luck inserting a picture but here's the readout that shows on the screen

Current server:stratum.btcguild.com:3333
Chip:0000000000000000000000000000000000

IP:192.168.1.111
Mask:255.255.255.0
Gateway:192.168.1.1
Web port:8000
Primary DNS:192.168.250.1
Secondary DNS:216.211.26.15
Ports:3333,3333
Server Addresses:stratum.btcguild.com,eu-stratum.btcguild.com
user:pass:myworker:123,myworker:123

For the gateway I'm using the access address for the router, the primary dns is the address of the modem and the secondary dns is my isp's dns server. Along the bottom this version has 3 options refresh, switch server and update/restart. the numbers at the top relating to performance are all zeros except for the time.

Hi
ok this will not work
you need to run a program call
stratum-proxy
you will need to have that running all the time for you blades to mine on BTCGuild

see this
http://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&sqi=2&ved=0CDAQFjAA&url=http%3A%2F%2Fmining.bitcoin.cz%2Fmining-proxy-howto&ei=fanSUtGJLsSu7AaWkoE4&usg=AFQjCNGThYSwz70aDJ7y7Wz-9Q5FDK87DQ&sig2=Q5AbBXIxBjBQpL0kCmRoGQ

[magog45]

Ok I have the proxy installed and running, what settings do I need on the blade. Right now the proxy runs showing constant connecting and disconnecting from btcguild as no client connects. Do I set the port in the first position or the second, do I need to list the servers and the DNS servers or not?

[pjcltd]

Ok I have the proxy installed and running, what settings do I need on the blade. Right now the proxy runs showing constant connecting and disconnecting from btcguild as no client connects. Do I set the port in the first position or the second, do I need to list the servers and the DNS servers or not?

ok lets say that the pc's ip address that the proxy is running on is
192.168.0.52


you need to put this in the line's

Ports:  8332,8332
Server Addresses:
192.168.0.52,192.168.0.52

then click on update
then you should see
more information on the proxy program