ajareselde (OP)
Legendary
Offline
Activity: 1722
Merit: 1000
Satoshi is rolling in his grave. #bitcoin
|
|
September 07, 2011, 08:25:50 AM |
|
ok 2nd psu worked just fine with gigabyte 5850 and 5770, but when i placed 5830 instead of 5850, 5830 xfx died..
theres no chance there was not enough power, so wtf happened,now when i put it in x16 system deasnt load at all, just vents working, and when i put it in x8 system works fine but theres no picture at all.
any ideas? sure hope i get replacement for that 5830
|
|
|
|
m3sSh3aD
|
|
September 07, 2011, 09:08:30 AM |
|
ok 2nd psu worked just fine with gigabyte 5850 and 5770, but when i placed 5830 instead of 5850, 5830 xfx died..
theres no chance there was not enough power, so wtf happened,now when i put it in x16 system deasnt load at all, just vents working, and when i put it in x8 system works fine but theres no picture at all.
any ideas? sure hope i get replacement for that 5830
Ive had 2x 5850's that failed on me. Very strange problems like yours, Just wouldnt recognise them 2 cards in any mining tools or OC program with any configuration. Them 2 cards causes alot of fiddling about cause i didnt relise there was 2 faulty ones. Weird thing is they booted fine on there own but failed to initialise mining. Overclockers in the UK did actually replace them with that fault and confirmed it, which quite suprised me as the cards themselves worked fine with games or any other 'everyday' task Check the AMP's your card is using and see if the PSU links up. 1 run 4x5850's all OC's pulling 100-120AMPS and my PSU's are 1200W @98Amps (ANTEC HCP1200) so it as a little overhead on the wattage and a little under on amps. Thats can damage hardware but theres not alot i can do about that. Dins a PSU that dishes out more than 100AMP, DOnt exist Corsair AX1200 is the better supply by the tinyiest of margins though. moral..... DONT BUY CHEAP PSU's, DO YOUR RESEARCH ON THEM, CORSAIR AX models, ALL OF THEM are the best CURRENT PSU's out there, imho and many others
|
|
|
|
Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
September 07, 2011, 06:02:39 PM |
|
ALL OF THEM are the best CURRENT PSU's out there Me think you just made the price rise by another 5% Truth is that there are many good PSU and unless you've read a 12 page review of one you don't know what you're buying. I have good feeling about OCZ Z series 1kw gold , + cheap
|
|
|
|
ajareselde (OP)
Legendary
Offline
Activity: 1722
Merit: 1000
Satoshi is rolling in his grave. #bitcoin
|
|
September 08, 2011, 08:23:25 PM |
|
ok, so my 5830 didnt die after all. it seams that my mbo ( http://www.gigabyte.com/products/product-page.aspx?pid=3901#ov ) doesnt support 3 gpus... but i dont get why it has 3 pciex slots ... i feel realy dumb now.. anyways i setted up 2x psu system with dummy load on 2nd one of 6x 75ohm resistors connected serial to get 450 ohm on 3,3v rail @ 0,024w . on 5V i placed a small fan @ 0,6 w. that works perfectly. 3rd gpu i removed and will put in 2nd rig aparently, still cant believe about the mbo...
|
|
|
|
chungenhung
Legendary
Offline
Activity: 1134
Merit: 1005
|
|
September 08, 2011, 08:48:01 PM |
|
ok, so my 5830 didnt die after all. it seams that my mbo ( http://www.gigabyte.com/products/product-page.aspx?pid=3901#ov ) doesnt support 3 gpus... but i dont get why it has 3 pciex slots ... i feel realy dumb now.. anyways i setted up 2x psu system with dummy load on 2nd one of 6x 75ohm resistors connected serial to get 450 ohm on 3,3v rail @ 0,024w . on 5V i placed a small fan @ 0,6 w. that works perfectly. 3rd gpu i removed and will put in 2nd rig aparently, still cant believe about the mbo... Where does it say it doesn't support 3 gpus?
|
|
|
|
Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
September 08, 2011, 10:04:09 PM |
|
ok, so my 5830 didnt die after all. it seams that my mbo ( http://www.gigabyte.com/products/product-page.aspx?pid=3901#ov ) doesnt support 3 gpus... but i dont get why it has 3 pciex slots ... i feel realy dumb now.. anyways i setted up 2x psu system with dummy load on 2nd one of 6x 75ohm resistors connected serial to get 450 ohm on 3,3v rail @ 0,024w . on 5V i placed a small fan @ 0,6 w. that works perfectly. 3rd gpu i removed and will put in 2nd rig aparently, still cant believe about the mbo... don't feel dumb, If I couldn't use 5 gpu on this board I'd ask for a refund. Is 0.02 watt really making a difference ?
|
|
|
|
ajareselde (OP)
Legendary
Offline
Activity: 1722
Merit: 1000
Satoshi is rolling in his grave. #bitcoin
|
|
September 09, 2011, 08:18:20 AM |
|
Where does it say it doesn't support 3 gpus? I tried and it didnt work, later i found in manual and on official page that it supports upto 2 crossfire..
don't feel dumb, If I couldn't use 5 gpu on this board I'd ask for a refund. Is 0.02 watt really making a difference ? Y, 0,02w makes a difference coz w/o that load it wont jump start ..
|
|
|
|
Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
September 09, 2011, 08:23:06 AM |
|
I have yet to see a board on which you can't use all PCI-e 1X for mining, even old board with pci-e 1.0
What is this 16x for if not for GPUs ?
|
|
|
|
BkkCoins
|
|
September 09, 2011, 09:39:13 AM |
|
I tried and it didnt work, later i found in manual and on official page that it supports upto 2 crossfire..
You shouldn't be using crossfire for mining anyway. The cards should just be running standalone. Crossfire doesn't help and I've read some reports here it reduces hash rate - though I've never tried it to see. In the specs it says that the two x16 will use x8 mode if both are installed but that shouldn't prevent them from working for mining and the x1 should still work.
|
|
|
|
chungenhung
Legendary
Offline
Activity: 1134
Merit: 1005
|
|
September 09, 2011, 01:47:40 PM |
|
I tried and it didnt work, later i found in manual and on official page that it supports upto 2 crossfire..
You shouldn't be using crossfire for mining anyway. The cards should just be running standalone. Crossfire doesn't help and I've read some reports here it reduces hash rate - though I've never tried it to see. In the specs it says that the two x16 will use x8 mode if both are installed but that shouldn't prevent them from working for mining and the x1 should still work. It supports up to 2 GPUs in crossfire. But mining does NOT require crossfire, thus the limit is not an issue for you.
|
|
|
|
m3sSh3aD
|
|
September 09, 2011, 02:54:45 PM |
|
I got a gigabyte that wont accept more than 3. Gigabyte are a load of rubbish. I found perfectly good MSI boards with 'military' grade for £45 and they dont wimper. All my gigabytes are iffy in some way or another. AVOID is my advice. MSI seem to be best boards but thats not suprising. Maybe not as good as they used be but towards gigabyte its like comparing a coke to a 11p asda(wallmart) special
|
|
|
|
chungenhung
Legendary
Offline
Activity: 1134
Merit: 1005
|
|
September 09, 2011, 03:13:52 PM |
|
I got a gigabyte that wont accept more than 3. Gigabyte are a load of rubbish. I found perfectly good MSI boards with 'military' grade for £45 and they dont wimper. All my gigabytes are iffy in some way or another. AVOID is my advice. MSI seem to be best boards but thats not suprising. Maybe not as good as they used be but towards gigabyte its like comparing a coke to a 11p asda(wallmart) special
Well I have a gigabyte mobo with two 16x slots and two 1x slots. Will test if it takes 4 gpus.
|
|
|
|
m3sSh3aD
|
|
September 09, 2011, 03:30:05 PM |
|
I got a gigabyte that wont accept more than 3. Gigabyte are a load of rubbish. I found perfectly good MSI boards with 'military' grade for £45 and they dont wimper. All my gigabytes are iffy in some way or another. AVOID is my advice. MSI seem to be best boards but thats not suprising. Maybe not as good as they used be but towards gigabyte its like comparing a coke to a 11p asda(wallmart) special
Well I have a gigabyte mobo with two 16x slots and two 1x slots. Will test if it takes 4 gpus. Ive owned 3. 1 blew when i plugged the 5th card in with no powered extenders (more than 300W draw from the mobo killed it), 1 in a PC with i5 setup and good memory (3x 5870's) which wont accept the 4th, and another on one of my 4x5850 rigs, which is the one thats not being 100% server style Does have ubuntu multi boot so goona clean and start again on it. Sticking with windows, Get better everything in it. Never thought id be saying that, EVER
|
|
|
|
tnkflx
|
|
September 09, 2011, 05:40:12 PM |
|
I got a gigabyte that wont accept more than 3. Gigabyte are a load of rubbish. I found perfectly good MSI boards with 'military' grade for £45 and they dont wimper. All my gigabytes are iffy in some way or another. AVOID is my advice. MSI seem to be best boards but thats not suprising. Maybe not as good as they used be but towards gigabyte its like comparing a coke to a 11p asda(wallmart) special
Also have a Gigabyte motherboard. It's being advertised for quad SLI etc, however, it won't accept 4 GPU's... I've opened a support case with them...
|
| Operating electrum.be & us.electrum.be |
|
|
|
m3sSh3aD
|
|
September 09, 2011, 06:07:09 PM |
|
I got a gigabyte that wont accept more than 3. Gigabyte are a load of rubbish. I found perfectly good MSI boards with 'military' grade for £45 and they dont wimper. All my gigabytes are iffy in some way or another. AVOID is my advice. MSI seem to be best boards but thats not suprising. Maybe not as good as they used be but towards gigabyte its like comparing a coke to a 11p asda(wallmart) special
Also have a Gigabyte motherboard. It's being advertised for quad SLI etc, however, it won't accept 4 GPU's... I've opened a support case with them... Good luck.... MSI boards are the best, SO reliable and not crammed full of bloatware etc. Simple board and electronics, Just like the old DFI boards, R.I.P (although the comp im on now is a DFI NF4 Delux still rocking it 9-10 years down the line ) Doesnt like a 5850 shuved in it though Gets artifacts and all sorts. Noticed it has a molex power connector on the board so it was the transition to the 4 pin 12V connector (now 8 in some).
|
|
|
|
Dr_Dave
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 01, 2013, 02:15:10 AM |
|
I know that I am real late to this thread but check out this site. www.add2Psu.com
|
|
|
|
|