Added 3rd Asic Blade and now Stratum proxy showing jobs=false all the time

[kingkurt]

Hi all

I was originally running a single REV 2.01 HK green board ASIC miner fine using the Stratum proxy via Slushes pool (ip 192.168.1.201) Then I recently purchased two REV 2.01 HK on the blue board with the fuse and added them (setting 192.168.1.202 for the second  and 192.168.1.203 for the third as ips) When I added the fist all was fine and I was getting double the hash rate but when I added the 3rd the proxy stopped accepting any new jobs and now all I am getting is the same clean_jobs=False over and over.

I removed the 2 blue boards and went back to the original green and still the same problem?

I am really stuck as to what the problem is, I can ping the miner fine and see it over the network, maybe I have messed up the pool somehow?

Any help would be greatly appreciated

Cheers
Kurtis

[kingkurt]

Heres what i get on the proxy screen

http://i642.photobucket.com/albums/uu142/kingkurtz/stratumerror_zps4f5ce531.jpg[/URL][/img]


 

[kingkurt]

No, I dont get it, it worked fine before I added the other two and now im back to the original one with the EXACT same settings and still all jobs=FALSE in proxy

I have reset the blade a couple of times and set it up again in the config and no change

Need some help

 

[TheWoodser]

Post a screen shot of all three blades config page.

What other network details can you provide?

Woodser

[kingkurt]

Well I have just tried one of the blades connected directly to the computers PSU and it runs fine so I can only assume the cheap PSU I was using is somehow not giving out enough power. Its rated at 500 and with the three blades consuming 100 it should have been plenty. Maybe when I added the 3rd it blew something in the PSU because that one had a dodgy fuse that kept blowing (see pic)

I think I might return that one as it is far from 'perfect working order'

As for the PSU Im guessing there is nothing I can do for it if its not putting out enough juice now - anything to be done or should I just buy a good one (this was a very cheap make)?

http://i642.photobucket.com/albums/uu142/kingkurtz/2014-01-14122638_zps6ad7dbfb.jpg


cheers