MegaMultiPool.com | +20 scrypt &+ 10 SHA-256 pools | Auto-switch pools | 1% Fee

[screenman]

been active for few hours with megamultipool, at first i feel it's same like other pool, always and always late displaying current speed from my worker, but then, hey, it doesn't really matters because the rally matters is when is see [yay !!!] at my ssh (if you know what i mean). my worker is working for everything they can get. compared to single mining crypto, i think i'll love this concept even more.

if you still have 0% fee, appreciate it if you set for my account. same username as this, manusiabumie.

stratum is only updating the shares a few times per minute to the database, also the mining hashrate is based on the last 300 seconds. That is why there is a delay on showing the hashrate. Nothing we can do about that i am afraid.

For the 0% fee, i need to disappoint you, this was only for the first 50 users, we have now more than 1700 users already

[Liom]

I'm in!!! 

[flounderella]

Just switched today from multipool. Like the nice clean interface and much quicker payout, and finally a pool founder who is easy to communicate with and really putting in the effort to grow the pool. Much appreciated

[yelloyello]

Still I have my doubts about the hashrate.
I am mining with:
USB 2 GHs
RIG 4 GHs
RIG 5 GHs
RIG 60 GHs
Sum: 71 GHs
(and 2 scrypt miners, but thats not so important for my complain)

When I mine at BTCguild, the sum is +/- 71. Sometimes higher, sometimes lower. E.g. sometimes 68, but also sometimes 75, depending on different factors.

Today I put all my miners to multimegapool for 6 hours.
If I look on the worker page I still miss an average of 10-15 GHs. I never reached my 71, the highest was 61.
I can imagine, that with switching the average differs, but in 5-10 minutes it must reach minimum 70.
At we speak (now) I put back tot BTCguild my slowest miners and let the 60 GHs rig on megamultipool, just to be sure.
After hours of watching, the maximum is 54.9 GH/s.  The rig provide with other pools between 57 and 65, not lower!!!
The average now (03.11 29jan2014) is 50,5 GHs. With only the 60 GH/s rig I miss 10 GH/s.

So I have my strong doubts about this pool site. Maybe the owner can explain something for the forum readers ??
The user is yelloyello, so maybe the owner can take a look in the logs.

[yelloyello]

Update:
for the first time the 60 GH/s rich shows on the worker page 59.55 GH/s. But thats for the first time in 7 hours.
(just to be complete in my story..)

[screenman]

Hi,
Thans for your remark.

The hashrates on the site are calculated, based on the coins difff, the numbers of shares we receive, ... it is not 100% correct. The real hashrate is the one that you see in your mining software. i will take a look to the hashrate calculations when i have finished the autotrading part.
The display of your hashrate doesn't affect your earings / shares / ... it's is only shown for your information.

is the hashrate in the topnavigation correct? or it that also missing some ghs??

Please let me know

thx

[breakbeater]

Scrypt hashrate is displayed correctly (for me), i have 2 MH and pool shows 1900-2100 KH. Maybe is just an issue with SHA-256.

[yelloyello]

Indeed, scrypt hashrate was correct. That was not my complain, but I can tell there is no problem with that.

With the SHA mining, also at the top bar navigation there was a wrong GH/s sum. I know that hashrate can differs.
But I was wondering why it was 8 hours long permanently lower. I never seen that with other pools.
Also the sum of the mined coins was (for my feeling) correct with the displayed hashrate.
(for example, I mined many days eMarks with 60 GH/s so I can compare a bit)

So maybe Megamultipool can take a close at the technical part of the pool?

[screenman]

Ok thx for the input, i know where to look now!

[cokeman0]

Hi

I can see you are starting to build the auto trade system... Looking nice.

Just one thing... perhaps you need to allow "0.01" values on BTC and LTC values, a mid-size sha256 rig, will take quite some time to make 1 BTC 

[jaggard]

Could you guys also look at the vardiff settings? I really don't see how my 35 BE's need to be at 64 or 128 diff, especially on the low diff/fast block time coins.
Think this is having the largest impact on my efficiency, I really don't see how that worker with those should ever get beyond 32 diff.

[deltree]

Is there any word on the auto trade option, I read that only few users have that capability. Is there something we need to achieve to unlock that feature, are there any timelines on the launch of this feature for the common man?

[zneww]

Sorry to bombard screen, but you getting any US servers anytime soon? I ping 130+ here :/

[screenman]

Sorry to bombard screen, but you getting any US servers anytime soon? I ping 130+ here :/

After we launch autotrading we will focus on adding new servers in the US & maybe in Russia

[screenman]

Is there any word on the auto trade option, I read that only few users have that capability. Is there something we need to achieve to unlock that feature, are there any timelines on the launch of this feature for the common man?

I am now writing the faq for autotrading, first that needs to be finished before users can use this function, else my mailbox will be flooded with questions

[deltree]

Is there any word on the auto trade option, I read that only few users have that capability. Is there something we need to achieve to unlock that feature, are there any timelines on the launch of this feature for the common man?

I am now writing the faq for autotrading, first that needs to be finished before users can use this function, else my mailbox will be flooded with questions

Always up to help you as long as it helps to introduce the feature first, if you need any help on the site don't hesitate to PM even if it means content writing is involved:)

[screenman]

Autotrading registrations are open: https://www.megamultipool.com/autotrade/

[cokeman0]

Autotrading registrations are open: https://www.megamultipool.com/autotrade/

Looking Nice, but don't you think you need support for below 1, e.g. UNO coin. 1 coin will take quite some time to mine

Perhape 0.1 on some coins, and 10 on others.... ??

and also in payout, I think alot want to cache out before 1 BTC

[screenman]

Autotrading registrations are open: https://www.megamultipool.com/autotrade/

Looking Nice, but don't you think you need support for below 1, e.g. UNO coin. 1 coin will take quite some time to mine

Perhape 0.1 on some coins, and 10 on others.... ??

and also in payout, I think alot want to cache out before 1 BTC

You can enter 0.001 as threshold as well

[cokeman0]

Autotrading registrations are open: https://www.megamultipool.com/autotrade/

Looking Nice, but don't you think you need support for below 1, e.g. UNO coin. 1 coin will take quite some time to mine

Perhape 0.1 on some coins, and 10 on others.... ??

and also in payout, I think alot want to cache out before 1 BTC

You can enter 0.001 as threshold as well

not on UNO, getting a fly-over with danish tekst telling me that the value must be 0 or 1... (and tested on BTC payout)