Newbie miner:Please help with avalon 200ghs miner. £25 or $40 donation on offer

[studio1one]

Pleased its working for you

Don't want a fiat payment from you, more than happy to help. When you mine some BTC if you want you can send some to



But really don't feel any obligation, happy to just see someone join the network  

Just to be sure go to the CGMiner status page and you should be able to see a speed under the Mhash section. Also check your pool for accepted shares.

[B_ReaLm]

ok noise is building now (exciting)  


thanks i really do owe those who helped il send each you guys a share of the money if you drop me your paypal details ,  thanks

Don't do Paypal...... but if you wanna donate me some coin feel free:

1BvGbrgRhNfJLbBG93L6F7tCSifcMSMnQf


Happy hashing!

[Kenshin]

ok noise is building now (exciting)  


thanks i really do owe those who helped il send each you guys a share of the money if you drop me your paypal details ,  thanks

BTW, get yourself 2 of this:

http://www.amazon.co.uk/gp/product/B002QVLBM2/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

and 2 of this:

http://www.amazon.co.uk/gp/product/B003VYB76I/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1

Then the noisy engine noise will disappear, by opening your case and change the case fans.

[andi1]

Oh dear didnt last long getting same fault that i had in the very beginning,  its stopped hashing and nothing showing in the status area.

[Firmware Version] => 20131110
cgminer: 176747f
cgminer-openwrt-packages: 0e12b1b
luci: 346e3e7
Socket connect failed: Connection refused


Wed Jan 15 18:47:46 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Wed Jan 15 18:47:46 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:46 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Wed Jan 15 18:47:46 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:46 2014 kern.info kernel: [   56.310000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
Wed Jan 15 18:47:47 2014 kern.info kernel: [   56.520000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
Wed Jan 15 18:47:48 2014 kern.info kernel: [   58.210000] wlan0: authenticate with 00:81:d8:6e:3f:9a
Wed Jan 15 18:47:49 2014 kern.info kernel: [   58.640000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
Wed Jan 15 18:47:49 2014 kern.info kernel: [   58.850000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
Wed Jan 15 18:47:49 2014 kern.info kernel: [   59.060000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
Wed Jan 15 18:47:49 2014 kern.info kernel: [   59.270000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
Wed Jan 15 18:47:50 2014 daemon.info sysinit: Alarm clock
Wed Jan 15 18:47:50 2014 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Wed Jan 15 18:47:50 2014 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:50 2014 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Wed Jan 15 18:47:50 2014 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:50 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Wed Jan 15 18:47:50 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:50 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Wed Jan 15 18:47:50 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:56 2014 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Wed Jan 15 18:47:56 2014 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:56 2014 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Wed Jan 15 18:47:56 2014 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:56 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Wed Jan 15 18:47:56 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:56 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Wed Jan 15 18:47:56 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:48:00 2014 kern.info kernel: [   70.000000] wlan0: authenticate with 00:81:d8:6e:3f:9a
Wed Jan 15 18:48:00 2014 daemon.info sysinit: Alarm clock
Wed Jan 15 18:48:00 2014 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Wed Jan 15 18:48:00 2014 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:48:00 2014 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Wed Jan 15 18:48:00 2014 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:48:00 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Wed Jan 15 18:48:00 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:48:00 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Wed Jan 15 18:48:00 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:48:00 2014 kern.info kernel: [   70.430000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
Wed Jan 15 18:48:01 2014 kern.info kernel: [   70.640000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
Wed Jan 15 18:48:01 2014 kern.info kernel: [   70.850000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
Wed Jan 15 18:48:01 2014 kern.info kernel: [   71.060000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
Wed Jan 15 18:48:01 2014 cron.info crond[559]: crond: USER root pid 946 cmd /usr/bin/cgminer-monitor
Wed Jan 15 18:48:03 2014 daemon.notice netifd: lan (571): Sending select for 192.168.1.139...
Wed Jan 15 18:48:03 2014 daemon.notice netifd: lan (571): Lease of 192.168.1.139 obtained, lease time 86400
Wed Jan 15 18:48:04 2014 daemon.notice netifd: Interface 'lan' is now up
Wed Jan 15 18:48:04 2014 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Jan 15 18:48:06 2014 daemon.info dnsmasq[647]: reading /tmp/resolv.conf.auto
Wed Jan 15 18:48:06 2014 daemon.info dnsmasq[647]: using nameserver 192.168.1.254#53
Wed Jan 15 18:48:06 2014 daemon.info dnsmasq[647]: using local addresses only for domain lan
Wed Jan 15 18:48:07 2014 daemon.info sysinit: ntpd: resolved peer 3.openwrt.pool.ntp.org to 213.136.0.252
Wed Jan 15 18:48:07 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:08 2014 daemon.info sysinit: ntpd: resolved peer 2.openwrt.pool.ntp.org to 217.114.59.66
Wed Jan 15 18:48:08 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:08 2014 daemon.info sysinit: ntpd: resolved peer 1.openwrt.pool.ntp.org to 91.236.251.24
Wed Jan 15 18:48:08 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:09 2014 daemon.info sysinit: ntpd: resolved peer 0.openwrt.pool.ntp.org to 88.190.16.117
Wed Jan 15 18:48:09 2014 daemon.info sysinit: ntpd: sent query to 88.190.16.117
Wed Jan 15 18:48:09 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0x01 offset 25.654418 delay 2.443525 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:09 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0x01 offset 25.980903 delay 1.785423 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:09 2014 daemon.info sysinit: ntpd: reply from 91.236.251.24: reach 0x01 offset 26.150966 delay 1.586017 status 0x24 strat 3 refid 0x5becfb0c rootdelay 0.044068
Wed Jan 15 18:48:09 2014 daemon.info sysinit: ntpd: reply from 88.190.16.117: reach 0x01 offset 26.850994 delay 0.044443 status 0x24 strat 2 refid 0xc05d0214 rootdelay 0.002411
Wed Jan 15 18:48:10 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:10 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:10 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:10 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0x03 offset 26.855108 delay 0.038972 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:10 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0x03 offset 26.855036 delay 0.039230 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:11 2014 daemon.info sysinit: ntpd: reply from 91.236.251.24: reach 0x03 offset 26.863637 delay 0.147802 status 0x24 strat 3 refid 0x5becfb0c rootdelay 0.044068
Wed Jan 15 18:48:12 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:12 2014 daemon.info sysinit: ntpd: sent query to 88.190.16.117
Wed Jan 15 18:48:12 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0x07 offset 26.855919 delay 0.040337 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:12 2014 daemon.info sysinit: ntpd: reply from 88.190.16.117: reach 0x03 offset 26.850617 delay 0.046815 status 0x24 strat 2 refid 0xc05d0214 rootdelay 0.002411
Wed Jan 15 18:48:13 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:13 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:13 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:13 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0x0f offset 26.855503 delay 0.037401 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:13 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0x07 offset 26.855912 delay 0.039548 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:13 2014 daemon.info sysinit: ntpd: reply from 91.236.251.24: reach 0x07 offset 26.871253 delay 0.139987 status 0x24 strat 3 refid 0x5becfb0c rootdelay 0.044068
Wed Jan 15 18:48:14 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:14 2014 daemon.info sysinit: ntpd: sent query to 88.190.16.117
Wed Jan 15 18:48:14 2014 daemon.info sysinit: ntpd: reply from 88.190.16.117: reach 0x07 offset 26.850117 delay 0.046277 status 0x24 strat 2 refid 0xc05d0214 rootdelay 0.002411
Wed Jan 15 18:48:14 2014 daemon.info sysinit: ntpd: reply from 91.236.251.24: reach 0x0f offset 26.871537 delay 0.133922 status 0x24 strat 3 refid 0x5becfb0c rootdelay 0.044068
Wed Jan 15 18:48:42 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:42 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:42 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:42 2014 daemon.info sysinit: ntpd: sent query to 88.190.16.117
Wed Jan 15 18:48:42 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0x0f offset 0.047524 delay 0.037515 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:42 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0x1f offset 0.047354 delay 0.038719 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:42 2014 daemon.info sysinit: ntpd: reply from 88.190.16.117: reach 0x0f offset 0.044106 delay 0.049387 status 0x24 strat 2 refid 0xc05d0214 rootdelay 0.002411
Wed Jan 15 18:48:42 2014 daemon.info sysinit: ntpd: reply from 91.236.251.24: reach 0x1f offset 0.060276 delay 0.141879 status 0x24 strat 3 refid 0x5becfb0c rootdelay 0.044068
Wed Jan 15 18:48:43 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:43 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:43 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0x3f offset 0.047654 delay 0.038115 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:43 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0x1f offset 0.047526 delay 0.038415 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:44 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:44 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:44 2014 daemon.info sysinit: ntpd: sent query to 88.190.16.117
Wed Jan 15 18:48:44 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0x3f offset 0.047427 delay 0.037950 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:44 2014 daemon.info sysinit: ntpd: reply from 88.190.16.117: reach 0x1f offset 0.042830 delay 0.046915 status 0x24 strat 2 refid 0xc05d0214 rootdelay 0.002411
Wed Jan 15 18:48:44 2014 daemon.info sysinit: ntpd: reply from 91.236.251.24: reach 0x3f offset 0.064736 delay 0.127624 status 0x24 strat 3 refid 0x5becfb0c rootdelay 0.044068
Wed Jan 15 18:48:45 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:45 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0x7f offset 0.047567 delay 0.038255 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:46 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:46 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:46 2014 daemon.info sysinit: ntpd: sent query to 88.190.16.117
Wed Jan 15 18:48:46 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0x7f offset 0.048231 delay 0.039553 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:46 2014 daemon.info sysinit: ntpd: reply from 88.190.16.117: reach 0x3f offset 0.043797 delay 0.044621 status 0x24 strat 2 refid 0xc05d0214 rootdelay 0.002411
Wed Jan 15 18:48:46 2014 daemon.info sysinit: ntpd: reply from 91.236.251.24: reach 0x7f offset 0.062215 delay 0.131965 status 0x24 strat 3 refid 0x5becfb0c rootdelay 0.044068
Wed Jan 15 18:48:47 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:47 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:47 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:47 2014 daemon.info sysinit: ntpd: sent query to 88.190.16.117
Wed Jan 15 18:48:47 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0xff offset 0.047575 delay 0.038712 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:47 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0xff offset 0.048629 delay 0.039929 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:47 2014 daemon.info sysinit: ntpd: reply from 88.190.16.117: reach 0x7f offset 0.043827 delay 0.045375 status 0x24 strat 2 refid 0xc05d0214 rootdelay 0.002411
Wed Jan 15 18:48:47 2014 daemon.info sysinit: ntpd: reply from 91.236.251.24: reach 0xff offset 0.062700 delay 0.127256 status 0x24 strat 3 refid 0x5becfb0c rootdelay 0.044068
Wed Jan 15 18:48:48 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:48 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0xff offset 0.047076 delay 0.037653 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:49 2014 kern.info kernel: [   92.120000] wlan0: authenticate with 00:81:d8:6e:3f:9a
Wed Jan 15 18:48:49 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:49 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:49 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:49 2014 daemon.info sysinit: ntpd: sent query to 88.190.16.117
Wed Jan 15 18:48:49 2014 kern.info kernel: [   92.550000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
Wed Jan 15 18:48:49 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0xff offset 0.048047 delay 0.040505 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:49 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0xff offset 0.048150 delay 0.040665 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:49 2014 daemon.info sysinit: ntpd: reply from 88.190.16.117: reach 0xff offset 0.045274 delay 0.047336 status 0x24 strat 2 refid 0xc05d0214 rootdelay 0.002411
Wed Jan 15 18:48:49 2014 daemon.info sysinit: ntpd: reply from 91.236.251.24: reach 0xff offset 0.061091 delay 0.127781 status 0x24 strat 3 refid 0x5becfb0c rootdelay 0.044068
Wed Jan 15 18:48:50 2014 kern.info kernel: [   92.760000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
Wed Jan 15 18:48:50 2014 kern.info kernel: [   92.970000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
Wed Jan 15 18:48:50 2014 kern.info kernel: [   93.180000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
Wed Jan 15 18:48:51 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:51 2014 daemon.info sysinit: ntpd: sent query to 88.190.16.117
Wed Jan 15 18:48:51 2014 daemon.info sysinit: ntpd: reply from 213.136.0.252: reach 0xff offset 0.047879 delay 0.038195 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Wed Jan 15 18:48:51 2014 daemon.info sysinit: ntpd: reply from 88.190.16.117: reach 0xff offset 0.042256 delay 0.048059 status 0x24 strat 2 refid 0xc05d0214 rootdelay 0.002411
Wed Jan 15 18:48:52 2014 daemon.info sysinit: ntpd: sent query to 213.136.0.252
Wed Jan 15 18:48:52 2014 daemon.info sysinit: ntpd: sent query to 217.114.59.66
Wed Jan 15 18:48:52 2014 daemon.info sysinit: ntpd: sent query to 91.236.251.24
Wed Jan 15 18:48:52 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0xff offset 0.047512 delay 0.037791 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025
Wed Jan 15 18:48:52 2014 daemon.info sysinit: - init complete -
Wed Jan 15 18:49:18 2014 kern.info kernel: [  120.680000] wlan0: authenticate with 00:81:d8:6e:3f:9a
Wed Jan 15 18:49:18 2014 kern.info kernel: [  121.110000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
Wed Jan 15 18:49:18 2014 kern.info kernel: [  121.320000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
Wed Jan 15 18:49:18 2014 kern.info kernel: [  121.530000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
Wed Jan 15 18:49:19 2014 kern.info kernel: [  121.740000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
Wed Jan 15 18:50:01 2014 cron.info crond[559]: crond: USER root pid 1197 cmd /usr/bin/cgminer-monitor
Wed Jan 15 18:50:16 2014 kern.info kernel: [  179.480000] wlan0: authenticate with 00:81:d8:6e:3f:9a
Wed Jan 15 18:50:17 2014 kern.info kernel: [  179.910000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
Wed Jan 15 18:50:17 2014 kern.info kernel: [  180.120000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
Wed Jan 15 18:50:17 2014 kern.info kernel: [  180.330000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
Wed Jan 15 18:50:17 2014 kern.info kernel: [  180.540000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
Wed Jan 15 18:50:40 2014 kern.info kernel: [  203.000000] wlan0: authenticate with 00:81:d8:6e:3f:9a
Wed Jan 15 18:50:40 2014 kern.info kernel: [  203.430000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
Wed Jan 15 18:50:40 2014 kern.info kernel: [  203.640000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
Wed Jan 15 18:50:41 2014 kern.info kernel: [  203.850000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
Wed Jan 15 18:50:41 2014 kern.info kernel: [  204.060000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
Wed Jan 15 18:51:12 2014 kern.info kernel: [  234.920000] wlan0: authenticate with 00:81:d8:6e:3f:9a
Wed Jan 15 18:51:12 2014 kern.info kernel: [  235.350000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
Wed Jan 15 18:51:12 2014 kern.info kernel: [  235.560000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
Wed Jan 15 18:51:13 2014 kern.info kernel: [  235.770000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
Wed Jan 15 18:51:13 2014 kern.info kernel: [  235.980000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out




kernel log

[    0.000000] Linux version 3.10.12 (xiangfu@0xf8) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38031) ) #6 Sun Nov 10 19:19:31 CST 2013
[    0.000000] MyLoader: sysp=388dd517, boardp=04505212, parts=7709ac36
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 803005b0, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28848k/32768k available (2187k kernel code, 3920k reserved, 588k data, 232k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-WR703N v1
[    0.350000] bio: create slab <bio-0> at 0
[    0.360000] Switching to clocksource MIPS
[    0.360000] NET: Registered protocol family 2
[    0.370000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.370000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.370000] TCP: Hash tables configured (established 512 bind 512)
[    0.380000] TCP: reno registered
[    0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.400000] NET: Registered protocol family 1
[    0.400000] PCI: CLS 0 bytes, default 32
[    0.420000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.430000] msgmni has been set to 56
[    0.440000] io scheduler noop registered
[    0.440000] io scheduler deadline registered (default)
[    0.440000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.450000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.460000] console [ttyATH0] enabled, bootconsole disabled
[    0.470000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.480000] m25p80 spi0.0: found s25sl032p, expected m25p80
[    0.480000] m25p80 spi0.0: s25sl032p (4096 Kbytes)
[    0.490000] 5 tp-link partitions found on MTD device spi0.0
[    0.490000] Creating 5 MTD partitions on "spi0.0":
[    0.500000] 0x000000000000-0x000000020000 : "u-boot"
[    0.500000] 0x000000020000-0x000000117d1c : "kernel"
[    0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.520000] 0x000000117d1c-0x0000003f0000 : "rootfs"
[    0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.540000] mtd: partition "rootfs" set to be root filesystem
[    0.540000] mtd: partition "rootfs_data" created automatically, ofs=0x340000, len=0xb0000
[    0.550000] 0x000000340000-0x0000003f0000 : "rootfs_data"
[    0.560000] 0x0000003f0000-0x000000400000 : "art"
[    0.560000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.590000] libphy: ag71xx_mdio: probed
[    0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.140000] ag71xx ag71xx.0 eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.150000] TCP: cubic registered
[    1.160000] NET: Registered protocol family 17
[    1.160000] 8021q: 802.1Q VLAN Support v1.8
[    1.170000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.180000] Freeing unused kernel memory: 232K (80316000 - 80350000)
[    3.750000] usbcore: registered new interface driver usbfs
[    3.750000] usbcore: registered new interface driver hub
[    3.760000] usbcore: registered new device driver usb
[    3.770000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.780000] ehci-platform: EHCI generic platform driver
[    3.780000] ehci-platform ehci-platform: EHCI Host Controller
[    3.790000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    3.790000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    3.820000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    3.820000] hub 1-0:1.0: USB hub found
[    3.820000] hub 1-0:1.0: 1 port detected
[    4.170000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    4.320000] hub 1-1:1.0: USB hub found
[    4.320000] hub 1-1:1.0: 2 ports detected
[    4.600000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[    7.150000] eth0: link up (100Mbps/Full duplex)
[    7.460000] jffs2: notice: (308) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (1 unchecked, 3 orphan) and 34 of xref (0 dead, 21 orphan) found.
[    7.490000] eth0: link down
[    9.720000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[    9.730000] Backport generated by backports.git backports-20130617-4-ge3220f5
[    9.740000] nf_conntrack version 0.5.0 (454 buckets, 1816 max)
[    9.790000] xt_time: kernel timezone is -0000
[    9.810000] cfg80211: Calling CRDA to update world regulatory domain
[    9.810000] cfg80211: World regulatory domain updated:
[    9.820000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.830000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.840000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.840000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.850000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.860000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.870000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.010000] ath: EEPROM regdomain: 0x0
[   10.010000] ath: EEPROM indicates default country code should be used
[   10.010000] ath: doing EEPROM country->regdmn map search
[   10.010000] ath: country maps to regdmn code: 0x3a
[   10.010000] ath: Country alpha2 being used: US
[   10.010000] ath: Regpair used: 0x3a
[   10.020000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.030000] cfg80211: Calling CRDA for country: US
[   10.040000] cfg80211: Regulatory domain changed to country: US
[   10.040000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.050000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   10.060000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   10.060000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.070000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.080000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.090000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   10.100000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   13.660000] device eth0 entered promiscuous mode
[   14.230000] eth0: link up (100Mbps/Full duplex)
[   14.230000] br-lan: port 1(eth0) entered forwarding state
[   14.240000] br-lan: port 1(eth0) entered forwarding state
[   16.240000] br-lan: port 1(eth0) entered forwarding state
[   39.990000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[   40.030000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[   40.240000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[   40.450000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[   40.660000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[   48.170000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[   48.600000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[   48.810000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[   49.020000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[   49.230000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[   55.460000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[   55.880000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[   56.100000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[   56.310000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[   56.520000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[   58.210000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[   58.640000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[   58.850000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[   59.060000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[   59.270000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[   70.000000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[   70.430000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[   70.640000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[   70.850000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[   71.060000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[   92.120000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[   92.550000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[   92.760000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[   92.970000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[   93.180000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[  120.680000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[  121.110000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[  121.320000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[  121.530000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[  121.740000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[  179.480000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[  179.910000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[  180.120000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[  180.330000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[  180.540000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[  203.000000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[  203.430000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[  203.640000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[  203.850000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[  204.060000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[  234.920000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[  235.350000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[  235.560000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[  235.770000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[  235.980000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out
[  266.960000] wlan0: authenticate with 00:81:d8:6e:3f:9a
[  267.390000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 1/3)
[  267.600000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 2/3)
[  267.810000] wlan0: direct probe to 00:81:d8:6e:3f:9a (try 3/3)
[  268.020000] wlan0: authentication with 00:81:d8:6e:3f:9a timed out

[studio1one]

have you had any shares accepted at your pool?

[andi1]

have you had any shares accepted at your pool?

no nothing it only ran for like 8 minutes.  I cant understand it just getting this same error all the time now and no information what so ever on the cgi status page.

Im wondering whether to factory reset it again as when i first got back into it today on after the reset earlier today that error was no where to be seen,  but it was on it yesterday when i first unboxed the unit and plugged it in.

Im wondering if it has a hardware fault?

[Kenshin]

I had the same problem as yours, and it is network problem. You need to set up DHCP, and save. Then once finished saving, do a hard reboot. Turn the power off at the power switch. Wait 10 seconds, and then it back on. You should have a new DHCP address. Now the problem should be fixed.

[studio1one]

I don't think so, did you stop CGMiner before entering your pool details?

It looks like an initial network error,

Wed Jan 15 18:47:46 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Wed Jan 15 18:47:46 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Wed Jan 15 18:47:46 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Wed Jan 15 18:47:46 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping


which is then resolved

Wed Jan 15 18:48:07 2014 daemon.info sysinit: ntpd: resolved peer 3.openwrt.pool.ntp.org to 213.136.0.252


 but then doesn't authenticate with the pool.

Wed Jan 15 18:48:09 2014 daemon.info sysinit: ntpd: reply from 217.114.59.66: reach 0x01 offset 25.980903 delay 1.785423 status 0x24 strat 2 refid 0x9e2bc042 rootdelay 0.010025

 Do you use any other pools?

I suggest

go to system

startup

stop CGMiner

setup on another pool (try BTCGuild I use them with these machines no problem)

enter the pool details

also just enter 123 in the password section as some pools are a bit weird about that for some reason

Make sure the rest of the CGMiner settings are correct

Also I think the Miner count needs to be set to 10 for the 200G machines, wouldn't swear to it and can't check until the morning now

save and apply

see what happens.

[andi1]

I had the same problem as yours, and it is network problem. You need to set up DHCP, and save. Then once finished saving, do a hard reboot. Turn the power off at the power switch. Wait 10 seconds, and then it back on. You should have a new DHCP address. Now the problem should be fixed.

Definitely still  some network issue ive just reset it power off and reboot and not it wont even let me log back into it at the ip i gave it 192.168.1.139

[studio1one]

Thats because you set it to DHCP, so it has been dynamically applied a new IP address by your router

You should be able to see its IP by logging onto your router and checking IP addresses of devices connected by ethernet.

[Kenshin]

Thats because you set it to DHCP, so it has been dynamically applied a new IP address by your router

You should be able to see its IP by logging onto your router and checking IP addresses of devices connected by ethernet.

Yeah, use a scanner to find the miner.

[andi1]

Ok thanks i decided to leave it at work because after toying with it all last night and today at work it was getting to the point where i felt like throwing it through the nearest window.

So tomorrow going to have a fresh go at it:-

Plan is to

1.  Scan using angry IP to try to find its ip now its set to dhcp .  Or log into my homehub router and see if it shows there.
2.  Once in im going to check that LAN is pinned in the network menu and not wifi as thats stil not funtioning.
then try it now.

3. If no sucess im going to try changing pools something like btguild as ive a sneaky feeling that could be the issue as it only threw a fit after i changed from the avalons factory sets pool (there own) to slushes pool. So im wondering if it just doesnt like slushes pool.

4. If above fails im going to try to set the chip frequency to 256 as ive read elsewhere that that helped someone with the error code. They also apparently cleared the "quiet" from the more options menu....  What does the chip frequency do to it exactly?  ive currently set it as suggested by a member on here its set at following:-

frequency 1300
miner count 16
target temp 60
over heat cutoff 70
more options quiet

5. Lastly if all above fails im going to factory reset it again back to oem then do it all  again one step at a time. As after the reset before the error wasnt there and it did look set to hash until it popped up. (this is making me wonder about slushes pool doing it when i inserted my details)(ive only just signed up to slushes pool today btw)
 

Thats really all i can try any more suggestions are welcomed.

[studio1one]

Try miner count set to 10 too.

[andi1]

Okl managed to get straight in this morning on the ip i assinged it 192.168.1.139 even though dhcp was on?

but really struggling with this now tried all of the below:-

tried changing pool to bt guild made no difference still got the error in cgi status which wont seem to clear regardless of reboot, restarting cgi miner etc
tried removing the wifi and just using the lan ethenet interface - no difference
tried changing chip frequency to 256 p- no difference
tried changing miner count to ten - no difference

The unit is totally sinlent todasy where as yestreday after the reset it was making some noise ,  then it hashed for 8 minutes and now im back to square 1.



And ive just tried changing it from dhcp back to static by entering the details as below and now it wont let me in at all again on the 192.168.1.139.  My next plan was to factory reset by the back end again to see if i could get rid of the error as it seemed to have disappeared after resetting it last time but now i can get into it at all again now?

The settings i entered when taking the dhcp off are as follows:-



 

[andi1]

Does anyone know which range i should searching for in ip scanner to try to find it?

Could i find it by plugging it straight into my laptop by ethenet?  if so what should i change my laptops lan ethnet ip4`s ip address to?  (is it something similar in range) like 192.168.1.123 ?



Failing that im thinking of hitting the rest button on the wrt305 but how do i go about finding it then does it resort to a default ip?

[studio1one]

try connecting direct from your PC again with an ethernet cable

Did you remember to go into starup and stop CGminer before changing the config?

did you untick disable DHCP as well as changing it from static IP to DHCP?

[andi1]

Ok ive brought up a command prompt pinged the miner at the ip it was assigned 192.168.1.139 and it responded back yet when i type 192.168.1.139 into my browser i can get into it.  (DHCP is now off on the miner btw)  And its since i switched the dhcp off  and assigned it a static ip that i cant get back into the backend

Ive also tried holding down the reset button on the wr305n router the light then flashes really fast and if it a open up a command prompt and ping it at 192.168.1.0 it does again respond yet once i put that it my browser nothing comes up either.

Its really got me now as i just cannot get the login screen up to get into the open wrt backend at all.  

[andi1]

try connecting direct from your PC again with an ethernet cable - Tried this it pings ok fro command prompt yet wont go into it with a browser.

Did you remember to go into star-up and stop CGminer before changing the config? - I didnt stop it but ive always restarted it after ive made any changes to enable them to update and kick in

did you untick disable DHCP as well as changing it from static IP to DHCP?  - Sorry i dont think i did i just left it to whatever it was by default.

Ive just also scanned with ip scan from 192.168.0.0 to 192.168.1.254  and it doesnt show up anywhere.

[studio1one]

OK

plug into your PC, no router

change your PC IPv4 back to

192.168.0.123

scan

192.168.0.1 to 192.268.0.255

and if no luck

change your IPv4 to

192.168.1.123

scan

192.168.1.1 to 192.168.255


post results up here.

[andi1]

OK

plug into your PC, no router

change your PC IPv4 back to

192.168.0.123

scan

192.168.0.1 to 192.268.0.255



ok back into it by ethenet direct into computer its on 192.168.0.100  so it seems the reset i did by hitting the button on the w305 has took it back to stock settings throughout.