4 Antminer S1's on 1 PSU ?

[pjcltd]

As the title says
What the best PSU to run 4 Antminer's that are clocked at 375

Or

do i run 2 PSU's with 2 on Each !!!!!!

[1714684508]

1714684508

[1714684508]

1714684508

[1714684508]

1714684508

[1714684508]

1714684508

[kendog77]

You should be able to safely run 2 Ants on a 1000W PSU, or 3 ants on a 1300W PSU.

I would not try to run 4 Ants on a single PSU. It's difficult and expensive to find a single PSU that can run over 1600W.

Each Ant requires 2 dedicated PCI-E cables to safely run.

[1l1l11ll1l]

You should be able to safely run 2 Ants on a 1000W PSU, or 3 ants on a 1300W PSU.

I would not try to run 4 Ants on a single PSU. It's difficult and expensive to find a single PSU that can run over 1600W.

Each Ant requires 2 dedicated PCI-E cables to safely run.

I'm running 2 ants per AX860 PSU and 3 ants per EVGA G2 1300W PSU

[Xer0]

LEPA has a 1600W PSU but no one tried that yet

however there are some stable >2kW server psu's

[cxboyminer]

Apparently a 530W psu can run a standard (not over clocked) S1. So you'll need 2.12kW to run 4 (530*4). These are all my assumptions, but sushi told me that 530W should be able to run a 180gh/s S1.

[GenTarkin]

Apparently a 530W psu can run a standard (not over clocked) S1. So you'll need 2.12kW to run 4 (530*4). These are all my assumptions, but sushi told me that 530W should be able to run a 180gh/s S1.

The 500w measurement is completely false, was done w/ a shitty PSU. At the wall w/ a 80+ GOLD @ 120v, I see about 1w / mhz, so 400mhz is about 400w! Take 10% off that and these use roughly 360w @ 400mhz, on the PSU itself.

[cxboyminer]

Apparently a 530W psu can run a standard (not over clocked) S1. So you'll need 2.12kW to run 4 (530*4). These are all my assumptions, but sushi told me that 530W should be able to run a 180gh/s S1.

The 500w measurement is completely false, was done w/ a shitty PSU. At the wall w/ a 80+ GOLD @ 120v, I see about 1w / mhz, so 400mhz is about 400w! Take 10% off that and these use roughly 360w @ 400mhz, on the PSU itself.

My bad then. Sorry for the false info. At least I learnt something new today

[kendog77]

Apparently a 530W psu can run a standard (not over clocked) S1. So you'll need 2.12kW to run 4 (530*4). These are all my assumptions, but sushi told me that 530W should be able to run a 180gh/s S1.

The 500w measurement is completely false, was done w/ a shitty PSU. At the wall w/ a 80+ GOLD @ 120v, I see about 1w / mhz, so 400mhz is about 400w! Take 10% off that and these use roughly 360w @ 400mhz, on the PSU itself.

My bad then. Sorry for the false info. At least I learnt something new today

Agreed, all of my Ants use less than 400W at the wall running at 200GH/s using a good quality, Gold PSU.

[Hippievogel]

You should be able to safely run 2 Ants on a 1000W PSU, or 3 ants on a 1300W PSU.

I would not try to run 4 Ants on a single PSU. It's difficult and expensive to find a single PSU that can run over 1600W.

Each Ant requires 2 dedicated PCI-E cables to safely run.

I'm running 2 ants per AX860 PSU and 3 ants per EVGA G2 1300W PSU

i think you should use Corsair ax860(comes with 7 years warranty) platinum it has a 93% eff. on 230v i used to have 2 antminers @ 180ghash stock clock and 25 usb sticks with no problem. best psu you can get otherwise you should go for the Evga Supernova 1300 Gold(10 years warranty) where u can run 3 ants on.

[charles2k]

Fortron Raider S 750W (80+ Silver) - two S1 non overclocked 735W at the wall (230V)
and if one unit only then 359W at the wall

[pjcltd]

Ok is any one using server psu's?


IE dell hp?

[Xer0]

Ok is any one using server psu's?

had one running on a DPS-600 but did not had my kill-a-watt then so no numbers
it's said these have far over 90% efficiency

[Xer0]

Apparently a 530W psu can run a standard (not over clocked) S1. So you'll need 2.12kW to run 4 (530*4).

thats because all pc psu have a max load for 3.3 + 5V + Antivoltages and another max for the 12V rails wich is then combined to the official watts on the box. while high power "gamer" supplies tend to deliver up to 95% of their stated power on 12V

so you need a "reserve" on a 500w one but can run 3 ants on a 1200w one instead 1500

[bobsag3]

Ok is any one using server psu's?


IE dell hp?

I will be getting a bunch of the Dell 2950 PSUs to use next week, I will report back.

[pjcltd]

Ok is any one using server psu's?


IE dell hp?

I will be getting a bunch of the Dell 2950 PSUs to use next week, I will report back.

I have a few coming in for a customer
Do you know the pin outs for them?
 I would like to try them before I send them on
To the customer

[BotwinBG]

I was running one unit off a Dell N750P PSU. The fan noise was a killer though, so today I switched to an IBM DPS-2500BB A PSU, cooled with two 3000rpm 120mm fans I strapped on the side of it. At over 200 ampere at 12v it is a total overkill for one antminer so I'll try hooking 3 more units to it tomorrow.

EDIT : if sidehack comes though with his mod thingy and I will be able to tune the fan speed on the Dell PSU, it'll be perfect, as I really like these units. Very compact.

[zulover]

with a killawatt check, my s1 uses 420@stock and 490@200ghs 400mhz. put 3 on a 1350watt psu, which claims 1500 watt peak, was running fine on one batch but on another on of the s1 switches on and off, i assumed it was not getting enough power, underclocked it was fine.

was told that running the psu at peak reduces its life by 40% and may even damage it.

[pjcltd]

I was running one unit off a Dell N750P PSU. The fan noise was a killer though, so today I switched to an IBM DPS-2500BB A PSU, cooled with two 3000rpm 120mm fans I strapped on the side of it. At over 200 ampere at 12v it is a total overkill for one antminer so I'll try hooking 3 more units to it tomorrow.

EDIT : if sidehack comes though with his mod thingy and I will be able to tune the fan speed on the Dell PSU, it'll be perfect, as I really like these units. Very compact.

whats side hack unto on the PSU's
do you have a link ?

[BotwinBG]

I was running one unit off a Dell N750P PSU. The fan noise was a killer though, so today I switched to an IBM DPS-2500BB A PSU, cooled with two 3000rpm 120mm fans I strapped on the side of it. At over 200 ampere at 12v it is a total overkill for one antminer so I'll try hooking 3 more units to it tomorrow.

EDIT : if sidehack comes though with his mod thingy and I will be able to tune the fan speed on the Dell PSU, it'll be perfect, as I really like these units. Very compact.

whats side hack unto on the PSU's
do you have a link ?

https://bitcointalk.org/index.php?topic=379677.0

[zulover]

i just had a powercool 750watt psu go pop after a day on 1 s1, exchanged it and the second went after 30 mins!! whats am i doing wrong?