🎀 [ANN] HANACOIN ~ NEW GPU MINEABLE COIN 🎀

[OGBandit23]

Is your coin present at least some kind of exchange?

[1714044907]

1714044907

[1714044907]

1714044907

[1714044907]

1714044907

[smithpool]

https://cdn.discordapp.com/attachments/429787136817102873/453275296762953729/WhatsApp_Image_2018-06-04_at_21.13.29.jpeg

pool  HANA coin  https://smithpool.net

conf for miners (-a lyra2v2 -o stratum+tcp://smithpool.dynu.net:4533 -u yourwalletaddress -p c=HANA )

for high difficulty  nicehash or miningrigrental add only  ,d =your diff or port dedicate 44533

example -a lyra2v2 -o stratum+tcp://smithpool.dynu.net:4533 -u yourwalletaddress -p c=HANA,d=8  or whatever you want

block explorer http://smithpool.net/explorer/HANA
 
discord support and coin request  https://discord.gg/Zy5esd6


low fee .... good job

[Hanacoin]

Is your coin present at least some kind of exchange?

No, none yet. We are currently gaining support and increasing our network. We need to ramp up marketing to ensure there is a demand for Hanacoin before we launch on an exchange.

[hashpro]

Hi Overnight my hash rate has dropped from 110Mhs to 92Mhs.
I've tested two pools with the same result.
I've tested other coins and their hash rate is reporting what I have mined before so it is not a rig issue.
Difficulty changes don't affect my hash rate.
Has there been a network change with this coin?

We have not had any network change. Check that your GPU's are not getting too hot.

Nope they are cooler than usual by 2-3 degrees.
Hash rate is higher now.. for the last 20 minutes. 108MH/s Difficulty has dropped from the 500's to 3-400's

I've never seen difficulty change the hasrate before except with Dag files and epoch changes E.g. https://steemit.com/ethereum/@thexmikkel/ethereum-mining-dag-file-grows-rx-series-hashrate-decreasing

Would you be able to advise if difficulty will affect hash rates when mining Hana?

Difficulty shouldn't affect the hashrate.

I know weird eh...  I've tried a few different miners
diff  M/Hash
191 111
5?? 82-85
368 108
450 92
246 109
210 110
249 109
260 109
273 109

The results started to get a bit closer so I started to collect the whole reported number

diff         M/Hash
283        109.72
286.057 109.68
296.565 109.68
305.669 109.72   
314.046 109.73

I did solve a block during my testing so that was fun.

I'll keep testing to see if I can find something

Hashpro Mining software
A couple of us have been trying to optimize a tpruvot clone you are welcome to test to see if this helps and report back.
Better hashing is the aim so you should see some improvements.
It will have dev mining time of 1 minute every hour as we aim to use the funds to to help upgrade further.
If we don't get better hashing we will remove this
A batch file is provided - If you use it you will probably know to change the -u address to your own.
You can use it to solo mine while the difficulty is low

Edit: Sorry first link went bad when I renamed the folder
This should work
https://mega.nz/#!uAtwAIZa!avWcg_gxiZBFWKfAYMhNY9vQ_aeIA7FofO8y1ti8Ftw

[BiteByte]

Hi Overnight my hash rate has dropped from 110Mhs to 92Mhs.
I've tested two pools with the same result.
I've tested other coins and their hash rate is reporting what I have mined before so it is not a rig issue.
Difficulty changes don't affect my hash rate.
Has there been a network change with this coin?

We have not had any network change. Check that your GPU's are not getting too hot.

Nope they are cooler than usual by 2-3 degrees.
Hash rate is higher now.. for the last 20 minutes. 108MH/s Difficulty has dropped from the 500's to 3-400's

I've never seen difficulty change the hasrate before except with Dag files and epoch changes E.g. https://steemit.com/ethereum/@thexmikkel/ethereum-mining-dag-file-grows-rx-series-hashrate-decreasing

Would you be able to advise if difficulty will affect hash rates when mining Hana?

Difficulty shouldn't affect the hashrate.

I know weird eh...  I've tried a few different miners
diff  M/Hash
191 111
5?? 82-85
368 108
450 92
246 109
210 110
249 109
260 109
273 109

The results started to get a bit closer so I started to collect the whole reported number

diff         M/Hash
283        109.72
286.057 109.68
296.565 109.68
305.669 109.72   
314.046 109.73

I did solve a block during my testing so that was fun.

I'll keep testing to see if I can find something

Hashpro Mining software
A couple of us have been trying to optimize a tpruvot clone you are welcome to test to see if this helps and report back.
Better hashing is the aim so you should see some improvements.
It will have dev mining time of 1 minute every hour as we aim to use the funds to to help upgrade further.
If we don't get better hashing we will remove this
A batch file is provided - If you use it you will probably know to change the -u address to your own.
You can use it to solo mine while the difficulty is low

Edit: Sorry first link went bad when I renamed the folder
This should work
https://mega.nz/#!uAtwAIZa!avWcg_gxiZBFWKfAYMhNY9vQ_aeIA7FofO8y1ti8Ftw

I will give it a try.
My test rig is a fresh build and is closed off by a firewall. It logs connections. Sorry but I will report here if there is some sort of callouts that are suspicious. So hopefully there will be none.

Edit: I will expect a once an hour dev mining connection which will be blocked if not one of the pools I allow.

[BiteByte]

Hi Overnight my hash rate has dropped from 110Mhs to 92Mhs.
I've tested two pools with the same result.
I've tested other coins and their hash rate is reporting what I have mined before so it is not a rig issue.
Difficulty changes don't affect my hash rate.
Has there been a network change with this coin?

We have not had any network change. Check that your GPU's are not getting too hot.

Nope they are cooler than usual by 2-3 degrees.
Hash rate is higher now.. for the last 20 minutes. 108MH/s Difficulty has dropped from the 500's to 3-400's

I've never seen difficulty change the hasrate before except with Dag files and epoch changes E.g. https://steemit.com/ethereum/@thexmikkel/ethereum-mining-dag-file-grows-rx-series-hashrate-decreasing

Would you be able to advise if difficulty will affect hash rates when mining Hana?

Difficulty shouldn't affect the hashrate.

I know weird eh...  I've tried a few different miners
diff  M/Hash
191 111
5?? 82-85
368 108
450 92
246 109
210 110
249 109
260 109
273 109

The results started to get a bit closer so I started to collect the whole reported number

diff         M/Hash
283        109.72
286.057 109.68
296.565 109.68
305.669 109.72   
314.046 109.73

I did solve a block during my testing so that was fun.

I'll keep testing to see if I can find something

Hashpro Mining software
A couple of us have been trying to optimize a tpruvot clone you are welcome to test to see if this helps and report back.
Better hashing is the aim so you should see some improvements.
It will have dev mining time of 1 minute every hour as we aim to use the funds to to help upgrade further.
If we don't get better hashing we will remove this
A batch file is provided - If you use it you will probably know to change the -u address to your own.
You can use it to solo mine while the difficulty is low

Edit: Sorry first link went bad when I renamed the folder
This should work
https://mega.nz/#!uAtwAIZa!avWcg_gxiZBFWKfAYMhNY9vQ_aeIA7FofO8y1ti8Ftw

I will give it a try.
My test rig is a fresh build and is closed off by a firewall. It logs connections. Sorry but I will report here if there is some sort of callouts that are suspicious. So hopefully there will be none.

Edit: I will expect a once an hour dev mining connection which will be blocked if not one of the pools I allow.

Ran it over night and seems to be more stable which shows me my issues is more with the algo and mining software than the pool or network.
I was getting an extra approx 1MH/s, showing more often as well (Only from a small sample of time so take what you want from that).
Only callouts were once an hour to suprnova for 1 minute so that part is true so far.
diff           Hash
418.493 110.17
391.199 110.11
500.566 110.04
531.586 112.03
229.265 112.05


I tried Solo mining for a few hours yesterday and found two blocks when the difficulty was 400-450 (My hash rate 109-110MHs)
Since I was not on the pools this time I got 50coins for one. The other was rejected - the wallet gives reasons for this, e.g. someone else solved it within seconds and it got into the mempool first.

Anyway lots of fun
I'll publish solo ming steps shortly for those that want to have some fun while the difficulty is low.

[BiteByte]

Solo Mining Config

It is really only worth solo mining when the difficulty is low

Your miner needs to support getblocktemplate and coinbase-addr
I used hashpro https://mega.nz/#!uAtwAIZa!avWcg_gxiZBFWKfAYMhNY9vQ_aeIA7FofO8y1ti8Ftw
Make sure that your mining machine is just that and not your usual everyday machine when using closed source miners

You need to install a wallet on your miner or on a machine that your mining computer can reach
(I'd say install on your miner to avoid connectivity issues if you are a novice)
Run the wallet and synchronize it to the network

Go to Settings-> Options-> Open Configuration file
(or Start-> Run. %appdata%/Hanacoin and edit hanacoin.conf edit in sonething like notepad)

*Note if your wallet is not synching then add a few nodes
You can get a few to start you off from https://explorer.hanacoin.com/network
Add them into your conf file in the following format (note the port is 9501)
addnode=13.211.42.53:9501
addnode=13.54.91.34:9501
addnode=203.220.199.191:9501
addnode=198.187.28.19:9501
addnode=27.32.180.46:9501
addnode=149.28.48.73:9501
 
Also add the following

server=1
rpcuser=test
rpcpassword=x
rpcallowip=192.168.1.10
rpcport=91919


These are the settings your bat file will use to connect to your wallet to mine.
rpcuser: Username for your batch file
rpcpassword: Password for your batch file
rpcallowip: IP address of the machine where your wallet is installed and running. Can be the same machine - if so transfer any large amounts to another wallet offline
rpcport: Any port number you want.


Check your ip and replace 192.168.1.10 with your IP
i.e. on the machine with your wallet installed Start Menu (start typing cmd) enter - which will open a command console
Type: ipconfig
look for IPv4 Address that is poulated with and IP address of your network.


Save the file
*IMPORTANT once saved close your wallet and let it shutdown completely
Re-open your wallet.


Batch file should look like:
hashpro.exe -a lyra2rev2 -o http://192.168.1.10:91919 -u test -p x --coinbase-addr=HJzbjF8YUcETVB6K23o84aRY7wBirzJNrr --no-stratum --no-longpoll  

Change the IP address, Port, User, password to reflect your conf file. Change the coinbase address to your own


Troubleshooting:
If you are using another miner it needs to support getblocktemplate and coinbase-addr.
If your wallet is on a seperate machine it will need to be reachable by your mining machine.
Windows firewall may play a part in stopping the connection
If on a separate network it may be routing or a network firewall
If coming throught he internet you will need to setup port forwarding
Easier if you setup another "mining" wallet on your miner, even it is just to test first.

* and yes it is not recommended to setup a wallet on your miner but do not use this to keep your millions  
Encrypt it and back it up as usual

I have not tested solo mining using another wallets address as the the coinbase address i.e. when you solve a block the reward goes to another wallet.

[BiteByte]

Difficulty has been between 250-550 for the last week
There was a big rental hash 8 hours which drove the diff to 1200-1500

Keep mining peeps as after the 12th (official Launch) it may not be this low ever again

[isthisusernametaken]

Difficulty has been between 250-550 for the last week
There was a big rental hash 8 hours which drove the diff to 1200-1500

Keep mining peeps as after the 12th (official Launch) it may not be this low ever again

Thanks, BiteByte, appreciate all the effort you have put into this one and the solo mining guide. Might be worthwhile posting this guide on the Discord chat also. I don't want to steal your thunder

[BiteByte]

Difficulty has been between 250-550 for the last week
There was a big rental hash 8 hours which drove the diff to 1200-1500

Keep mining peeps as after the 12th (official Launch) it may not be this low ever again

Thanks, BiteByte, appreciate all the effort you have put into this one and the solo mining guide. Might be worthwhile posting this guide on the Discord chat also. I don't want to steal your thunder

Nope - you go for it - It was a group effort in the Raven ANN I've adjusted it a bit for Hana

[gemtime6]

interesting concept I would like to get to know the team behind hana coin honestly before I start sharing my mining power towards securing the network

[luksbit]

Since HAnacoin will not have the characteristic of guaranteeing privacy, then whoever owns Hanacoin coins should undergo KYC data validation?

[isthisusernametaken]

Since HAnacoin will not have the characteristic of guaranteeing privacy, then whoever owns Hanacoin coins should undergo KYC data validation?

Hi luksbit, good question.
In short, no KYC is not required for anyone holding Hanacoin. KYC rules differ between each country but tend to apply at the financial transaction level (exchange).
We are referring to not masking the transactions as outlined in this article: https://www.nasdaq.com/article/know-your-coins-public-vs-private-cryptocurrencies-cm849588
Basically, transactions can be seen in the block explorer and tied back to individual wallets numbers.
Hope this helps.
Regards,
Kirk

[BiteByte]

<SNIP>

I tried Solo mining for a few hours yesterday and found two blocks when the difficulty was 400-450 (My hash rate 109-110MHs)
Since I was not on the pools this time I got 50coins for one. The other was rejected - the wallet gives reasons for this, e.g. someone else solved it within seconds and it got into the mempool first.

Anyway lots of fun
I'll publish solo ming steps shortly for those that want to have some fun while the difficulty is low.

Hit no blocks after solo mining today for 6-7 hours. The diff has been under 300 a lot of the day, even under 200 at some stages
Goes to show it can be unlucky a lot of the time
I have to turn my rig off for a few days since my job involves a lot of travel.

Keep mining the rest of you it is a good chance to get some good numbers before the 12th

[shiggidy]

looking forward to seeing the "official" launch but still mining in this early release.. i think its a great opportunity for anyone who gets a lot of coins quickly!

[CryptoTrader178]

Would have been wonderful to have more cpu mineable coins too...

[BiteByte]

Those that come on here late - Mainet mining has started before the official launch (...to iron out issues) and the difficulty for now is low
See Difficulty here Hanacoin Explorer
Get cracking before the mob get here and the diff goes nuts

Should practice what I preach and turn my miners back on.

[BiteByte]

Hi Devs - are we still on track for the Official release on 12 June?

[Hanacoin]

Hi Devs - are we still on track for the Official release on 12 June?

Yes on track!

[AltcoinCash]

HANA is now mining at  GpuHot.com ♨️  pool.

Code:

-a lyra2v2 -o stratum+tcp://gpuhot.com:4533 -u KA3vQVBpkBFTPpiWRJx1ixR7bnu7nACNYG -p c=HANA

🎀Block explorer: http://gpuhot.com/explorer/HANA
🎀Nodes list: http://gpuhot.com/site/peers?id=21233
🎀Coin channel: https://discord.gg/A44W6hw