Problem with ASRock h81 Pro Btc 2.0 the HDMI burn?

[ETNPro]

I had turn off before it because the electroneum was high diff so today i was ready to turn it on and when i turn on the hdmi just burned, you can check the image, i dont know what happend but in that hdmi port of the motherboard i didnt had anything connected i just had a vga cable inside.

I didnt had any problems before it was working almost 2 months.

Here are the images of the port:
https://i.imgur.com/3pvT8pF.jpg
https://i.imgur.com/MC4S0kD.jpg
https://i.imgur.com/yJW7czC.jpg

So tell me do i need to replace this part or i can use the motherboard without it and using the vga slots on graphic cards instead of the motherboard? If i need to replace it do you know how much it cost?

Thanks!

[ETNPro]

Anyone?

[leonix007]

My rules for this.

when it got burnt.. replace it.

So tell me do i need to replace this part or i can use the motherboard without it and using the vga slots on graphic cards instead of the motherboard? If i need to replace it do you know how much it cost?

you can actually use those GPU cards instead of onboard VGA's, just don't use them for any activities other than mining.

motherboard price? see newegg.com

[leowonderful]

The Rev 2 H81 Pro BTCs are going for around $65 used to ~$80 new on eBay and around the same on Newegg. Newegg even has an open box H81 for $66.57 + $1.99 shipping here if you want to try a non new board, near $60 is as low as it gets for these types of boards.

[ETNPro]

The motherboard work and i ask for replacement of the hardware part not the whole motherboard, because motherboard is new old 2 month.
I used only for mining nothing other.

[Vann]

If the motherboard is only two months old it should be under warranty. Contact ASRock support.

[jings007]

I had turn off before it because the electroneum was high diff so today i was ready to turn it on and when i turn on the hdmi just burned, you can check the image, i dont know what happend but in that hdmi port of the motherboard i didnt had anything connected i just had a vga cable inside.

I didnt had any problems before it was working almost 2 months.

Here are the images of the port:
https://i.imgur.com/3pvT8pF.jpg
https://i.imgur.com/MC4S0kD.jpg
https://i.imgur.com/yJW7czC.jpg

So tell me do i need to replace this part or i can use the motherboard without it and using the vga slots on graphic cards instead of the motherboard? If i need to replace it do you know how much it cost?

Thanks!

If the motherboard still working if you put the video card on it, why not to replace than to buy a new motherboard. if the parts that were burned are replaceable then you go with it, replace it. I think the parts that were burned is coil easy to replace.