[ANN][MAX] MAXcoin - PoW, ASIC Resistance, Keccak GPU Mining

[fenghush]

You can use stratum+tcp://erebor.dwarfpool.com:3339 instead

-------------------------------------------------------------------------------
 (5s):1.173G (avg):1.145Gh/s | A:5152  R:192  HW:0  WU:277.6/m
 ST: 2  SS: 0  NB: 3  LW: 49  GF: 0  RF: 0
 Connected to erebor.dwarfpool.com diff 16 with stratum as user mPtCJvRqrJWZ98Dwp315T5fykDk6NdKERD
 Block: 16a8c7577bee4911...  Diff:18.4E  Started: [04:16:03]  Best share: 134
--------------------------------------------------------------------------------
 [P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  81.0C 2850RPM | 291.1M/286.3Mh/s | A:1232 R:48 HW:0 WU: 66.5/m I:13
 GPU 1:  79.0C 2610RPM | 291.1M/286.3Mh/s | A:1408 R:32 HW:0 WU: 74.8/m I:13
 GPU 2:  81.0C 2842RPM | 291.0M/286.3Mh/s | A:1312 R:96 HW:0 WU: 73.1/m I:13
 GPU 3:  76.0C 2374RPM | 290.9M/286.3Mh/s | A:1200 R:16 HW:0 WU: 63.2/m I:13
--------------------------------------------------------------------------------

 [2014-02-08 04:16:40] Accepted d29218f3 Diff 1/16 GPU 3

Does the 1gh cgminer work ?
I just get a blank terminal and no GPU action.

Can the keccak miner be taken out and plopped into a normal cgminer directory ?

I couldn't get it to work. It runs no problem, just wont talk to the pool

The pool is down.

OK ta.
Someone really hates this coin, or values it enough to elbow everyone else out.

[mu]

I'm new to mining this kind of coin, and have a question about my hashrates.

I have two cards that get about 400kh/s on a Scrypt coin. I'm getting about half that with MaxCoin, but it's in Mh/s so I assume that's different.

My cards don't seem to be running at full load, though. When I try to change intensity, it says 14 is the max, and even that doesn't raise the hashrate at all.

So just checking, is everything ok?

https://i.imgur.com/06JsQHg.png

[ImI]

I'm new to mining this kind of coin, and have a question about my hashrates.

I have two cards that get about 400kh/s on a Scrypt coin. I'm getting about half that with MaxCoin, but it's in Mh/s so I assume that's different.

My cards don't seem to be running at full load, though. When I try to change intensity, it says 14 is the max, and even that doesn't raise the hashrate at all.

So just checking, is everything ok?

try to set mem-clock higher and engine clock also. intensity 14 is usually the upper end for none-scrypt mining.

where can one get the maxcoin-compatible cgminer?

[notNigel]

[tabnk]

NET HASH @ 1,028 GH/s !!! To the MOON.

[Mk2vr6]

I've added the nodes to config and also to debug window and it still wont sync!!

I've tried restarting QT and doing it all again and still nothing.

[durden21]

Hi guys,

Have anybody received any payments from RocketPool.co.uk? I'm mining there with 26 CPU cores and 3 GPUs for several hours, but seen no payments so far. And stats are disabled on their site..

[note235]

whats the best exchange in your guys opinion now?

[Pajkho]

Mcxnow.com

[Sarahiko]

Going back to datacoin
no much luck for this coin.

[Atrides]

DwarfPool
http://dwarfpool.com/max
 - Anonymous pool.
 - Autopayouts. True round based PPS (proportional your shares)
 - Maxmimum transparency, no stealing shares and no hidden fees
 - Two servers for failover. Shares will be calculated from both servers.

All miners supported:
 - minerd (CPU)
 - cgminer by reorder (GPU)
 - cudaminer by cbuchner1 (GPU)

Examples:

Code:

cgminer --keccak -o "stratum+tcp://erebor.dwarfpool.com:3339" -u COIN_WALLET -p 1
--failover-only -o "stratum+tcp://moria.dwarfpool.com:3339" -u COIN_WALLET -p 1

Code:

minerd --algo=keccak --url stratum+tcp://erebor.dwarfpool.com:3339/ --user COIN_WALLET --pass 1

Example for Amazon EC2 g2 nvidia video instance:

Code:

cudaminer -l K20x32 --algo=keccak --url stratum+tcp://erebor.dwarfpool.com:3339/ --user COIN_WALLET --pass 1

[DeltaQuebec]

Im having issues with the wallet Syncing up..any one else? Re-install?


Resolved. Made a maxcoin.conf with node list found here: http://www.reddit.com/r/maxcoinproject/comments/1xb4un/compiled_windows_wallet/

Currently syncing now with no issues YAY!

[zpply]

Can anyone tell me how to mine this using a mac?

[antonio8]

Does anyone have a link to an actual GUI wallet and not the dos looking one?

[MickeNorsk]

Dwarfpool works so good for me right now!
I recommend dwarfpool for everyone. Also the cgminer on their site gives me 2x more hash than arOpenCLMAX miner.

http://dwarfpool.com/max

I'm getting 450 MH/s per r9 290

[chip99]

Dwarfpool works so good for me right now!
I recommend dwarfpool for everyone. Also the cgminer on their site gives me 2x more hash than arOpenCLMAX miner.

http://dwarfpool.com/max

I'm getting 450 MH/s per r9 290

the problem is its crashing after a while. i cant go sleep and let it run. any solution for this ?

[Brilliantrocket]

Dwarfpool works so good for me right now!
I recommend dwarfpool for everyone. Also the cgminer on their site gives me 2x more hash than arOpenCLMAX miner.

http://dwarfpool.com/max

I'm getting 450 MH/s per r9 290

the problem is its crashing after a while. i cant go sleep and let it run. any solution for this ?

Mine a coin that doesn't cause crashes?

[sidhujag]

Does anyone have a link to an actual GUI wallet and not the dos looking one?

it was up here https://github.com/Max-Coin/clients/releases/tag/1.0, I did the source... but I think they took it down, the conf file needs t obe updated by adding more nodes to help sync up.

[MickeNorsk]

Dwarfpool works so good for me right now!
I recommend dwarfpool for everyone. Also the cgminer on their site gives me 2x more hash than arOpenCLMAX miner.

http://dwarfpool.com/max

I'm getting 450 MH/s per r9 290

the problem is its crashing after a while. i cant go sleep and let it run. any solution for this ?

I have no idea, mine doesn't crash.

This is my settings:

cgminer --keccak -o "stratum+tcp://erebor.dwarfpool.com:3339" -u mRL3xNCz6KVNz4S7aiUNPcTZMwdhq7pkkL -p 1
--failover-only -o "stratum+tcp://moria.dwarfpool.com:3339" -u mRL3xNCz6KVNz4S7aiUNPcTZMwdhq7pkkL -p 1

After I start the bat, I configure both gpu's to intensity 14.

On MSI Afterburner I have:
Core Clock: 1100 mhz
Memory Clock: 1500 mhz
Power limit: +20%

I have 2x r9 290.

[DeltaQuebec]

Found instructions on youtube. If any one cant sync their windows -QT heres the solution. Find tehe MAXCOIN folder in your appdata..open it.. make a new txt file..name it maxcoin.txt   Open it... copy paste this in the text:

addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25
addnode=213.192.56.163:8334
addnode=148.251.11.43
addnode=188.226.147.41
addnode=187.104.154.105
addnode=137.226.216.235
addnode=94.23.18.51
addnode=wombat.dar.sh
addnode=95.85.14.92
addnode=95.85.38.7
addnode=95.85.41.61
addnode=95.85.40.179
addnode=95.85.42.240
addnode=95.85.43.202
addnode=95.85.43.189
addnode=95.85.25.162
addnode=107.170.246.18
addnode=107.170.245.188
addnode=107.170.245.192
addnode=107.170.10.242
addnode=192.241.174.133
addnode=95.85.45.177
addnode=95.85.41.61
addnode=107.170.246.18
addnode=107.170.245.188
addnode=107.170.245.192
addnode=107.170.10.242
addnode=95.85.40.179
addnode=95.85.42.240
addnode=95.85.43.202
addnode=95.85.45.177
addnode=99.122.1.3
addnode=213.192.56.163
addnode=95.85.38.7
addnode=192.241.174.133
addnode=95.85.14.92
addnode=95.85.43.189
addnode=95.85.25.162
addnode=75.80.57.254
addnode=111.255.147.185
addnode=213.192.56.163
addnode=89.168.15.251
addnode=162.13.142.65
addnode=162.243.35.116
addnode=54.224.7.164:8668
addnode=71.95.95.151:8668
addnode=162.243.125.133:8668
addnode=67.182.241.72:8668
addnode=54.80.159.218:8668
addnode=188.31.214.67:8668
addnode=119.125.3.234:8668
addnode=188.226.135.226:8668
addnode=109.18.8.226:62130
addnode=184.149.238.84:4483
addnode=90.185.9.234:8668
addnode=144.76.97.108:8668
addnode=216.246.254.21:54141
addnode=54.197.43.234:8668
addnode=24.101.175.23:8668
addnode=54.196.215.239:8668
addnode=109.150.168.66:58385
addnode=54.237.69.49:8668
addnode=50.157.163.14:58190
addnode=50.56.181.6:8668
addnode=178.167.133.60:15091
addnode=1.115.196.234:3265
addnode=176.92.253.143:59211
addnode=96.49.120.33:22081
addnode=98.145.86.183:62397
addnode=1.229.110.44:8161


Then save as> maxcoin.conf   then.. close maxcoin wallet.. & restart.  I started dl'ing the blockchain 20 seconds after dooing this. Thank you to whom ever made that youtube vid!!!

Also can be found here: http://www.reddit.com/r/maxcoinproject/comments/1xb4un/compiled_windows_wallet/

Enjoy!