looks easy enough, but adding 8 more fans to each 1000w psu might be a bit much. (total 6 fans per rig...)
i'll keep looking in to see if its gonna help enough to warrant the downtime & cost of said fans.
Yea, I don't know how it would work running 8 fans on a PSU that is already shared by 2 Ants. I should say that on my first Ant, I switched/reconfigured it to have the heat sinks face out and didn't put the fans on top of the heat sinks until more than a week later, and it was running much cooler as long as I have the big fan blowing in front of it.
As far as time:
To reconfigure the Ant to have heat sinks facing out: 15-30 minutes (possibly 10min or less, but have to be careful)
To put the fans: 20min to 45 min (some people that are more experienced can probably do it in 10min or less. you can practice the zip ties and such before doing this)
The zip ties are inter-connected to make it longer. The 2 fans are connected to each other by zip ties in the middle top and middle bottom. The fans hang to the sides of the case of the Ants, which surprisingly has holes for them.