what is the command line to restart miner Claymore's if get incorrect share

[hack4love]

what is the command line to restart miner Claymore's  if get   incorrect share

[1715281666]

1715281666

[1715281666]

1715281666

[1715281666]

1715281666

[hack4love]

up

[hack4love]

"GPU #3 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"

[Geraldo]

To re-load the Claymore config, you can press "r."

You can fix the problem you are facing (incorrect share) with lowering your OC setting. You could try to reduce your OC setting bit by bit (until you get the right one setting) or bring it back to default setting then increase it bit by bit.

[adaseb]

Are you talking about incorrect share or rejected share?

Restarting the miner won't do anything for incorrect shares, it means your memory straps are modded incorrectly and you need to adjust your voltage and clock settings.

If you are talking about submitting rejected shares which sometimes happens in some pools due to bad stratum coding, the pool will automatically kick you off and reconnect you and you will get a new job which shouldn't get any more rejects.

This is very common with the XMR Claymore miners, no real work-around really except waiting until the pool kicks you off and you auto reconnect.

[SpceGhst]

The easy fix for “incorrect share” error is to reduce mem clock by 25 for that card.  Should fix the issue...

[Geraldo]

Are you talking about incorrect share or rejected share?

OP thinks re-loading Claymore will fix OP's problem (as shown on the OP's first post) but then OP giving us (3rd post) error message that appears on OP's Claymore:

"GPU #3 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"

So, what was OP talking about is incorrect share.