TheSmo (OP)
|
|
February 07, 2014, 02:38:53 PM |
|
Hi all,
I would like to create my first mining rig and, after I found so many ppl having issues with more than 3 cards, i would like to ask for some help:
Planned hardware: Graphic card: 3x SAPPHIRE R9 280X 3GB GDDR5, when everything works fine, a 4th Motherboard: ASRock 970 Extreme4 (but it has only 3x PCI slots, so which board can handle 4 cards?)
Questions: 1) I plan to run this via WLAN, using Teamviewer. Do you see any issues with that? 2) What motherboard should I use? I didn't find one with 4x PCIe slots. 3) The card's spec are different on several sites, ranging from 250 to 750 Watts? 4) What power unit should I use, depending on the outcome above (3 or 4 cards)? 5) Can Windows 7 handle 4 graphic cards? 6) When running Windows 7, do I need to have dummy plugs for the cards?
Any help is appreciated, thanks for your time!
|
|
|
|
TheSmo (OP)
|
|
February 07, 2014, 10:07:08 PM |
|
Any input plz?
|
|
|
|
tichwich85
Jr. Member
Offline
Activity: 43
Merit: 10
|
|
February 08, 2014, 01:50:09 AM |
|
1) works perfectly 2) asrock h81 pro BTC ( 6 slots no powered risers needed) 3) should be around 250-270 4) 1250w 5) yes 6) no
Hope that helps u forward
|
|
|
|
Victoo
|
|
February 08, 2014, 05:30:13 AM |
|
|
|
|
|
TheSmo (OP)
|
|
February 11, 2014, 12:33:39 PM Last edit: February 11, 2014, 12:51:08 PM by Smoerble |
|
Thanks a lot for your input. I am ordering the following components: card: 5x 280x. motherboard: ASRock H18 Pro BTC CPU: Intel® Celeron® Processor G1820 boxed RAM: 4GB G.Skill DIMM 4 GB DDR3-1333 Risers: hard to get in Germany, buying powered Risers now, might take a week to get delivered . HDD: I have one, about 3 years old, should be fine. What PSU should I use? The cards will need 1250 Watts together. Anything else I miss, except a rack?
|
|
|
|
N[e]wBie
|
|
February 11, 2014, 01:53:05 PM |
|
4 280x on one 1250 is pushing it, no way to five
|
BTC: 1ESZr887vTZqYtDuwwspn1jBaoRU9jMcv1
|
|
|
TheSmo (OP)
|
|
February 11, 2014, 03:13:33 PM |
|
Ok, thanks... so maybe I should better go for 2 rigs, each 3 R9-280x, each with PSUs 850Watts?
|
|
|
|
MoneyMorpheus
|
|
February 11, 2014, 03:15:41 PM |
|
You can use 2 psus in one rig
|
|
|
|
N[e]wBie
|
|
February 11, 2014, 05:50:56 PM |
|
850w is enough for two 280x, not three. Two is pushing it, again. Use multiple PSUs
|
BTC: 1ESZr887vTZqYtDuwwspn1jBaoRU9jMcv1
|
|
|
TheSmo (OP)
|
|
February 11, 2014, 06:01:39 PM |
|
I did not find a description, how I need to work with two PSUs:
Do I need to somehow connect them or do they just work totally independant, one just cards + mainboard etc, the other just plain cards?
Will something break, if I turn on the PSUs in the wrong order for example?
|
|
|
|
MoneyMorpheus
|
|
February 11, 2014, 06:14:11 PM |
|
I did not find a description, how I need to work with two PSUs:
Do I need to somehow connect them or do they just work totally independant, one just cards + mainboard etc, the other just plain cards?
Will something break, if I turn on the PSUs in the wrong order for example?
You can make them work completely independent. To do that you have to short the green wire with any black on the atx connector (the one that goes to the mb). Or you can get an adapter to hook both of them directly to the mobo. Nothing will brake if you turn them on in the wrong order, though the gpus that are connected to the second one might not be recognized. If the psu that just powers gpus is shut off the system will hang. It happened to one of my rigs that had plenty spare power on one psu and I use it to power some electronic projects. Quite a few times something went wrong and the psu shut off and all the gpus are still working. Don't mix 2 psus in the same card.
|
|
|
|
TheSmo (OP)
|
|
February 11, 2014, 09:41:16 PM |
|
I did not find a description, how I need to work with two PSUs:
Do I need to somehow connect them or do they just work totally independant, one just cards + mainboard etc, the other just plain cards?
Will something break, if I turn on the PSUs in the wrong order for example?
You can make them work completely independent. To do that you have to short the green wire with any black on the atx connector (the one that goes to the mb). Or you can get an adapter to hook both of them directly to the mobo. Sorry, this I don't understand. Do you have a link to an adapter so I get an idea, what you mean please?
|
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
|
February 11, 2014, 09:43:59 PM |
|
4 280x on one 1250 is pushing it, no way to five
Your forum handle tells way too much about yourself. 1250 is fine for 4 280x. 5? Not without some serious undervolting. I have had a 5x 280x rig pull 1250W from the wall before, @ 1.01V, so it is possible. That's at the wall, which means the rig was only pulling 1100W from the PSU.
|
|
|
|
N[e]wBie
|
|
February 12, 2014, 10:52:06 AM |
|
He did not mention that he would be undervolting. Four on a 1250 could be fine if he is not overclocking, if he is he would be operating close to the PSU limit (~250-350 watt/card). Undervolting would safely fit four on one 1250 psu. You can try for five on one 1250 undervolted, but I doubt its a good idea, especially recommending it to someone who is new. At least say *warning its dangerous to try this without a serious undervolt* . Its not really a good idea to push the wattage of PSUs to their maximum capacity anyways, and it will become less efficient over time.
|
BTC: 1ESZr887vTZqYtDuwwspn1jBaoRU9jMcv1
|
|
|
TheSmo (OP)
|
|
February 12, 2014, 11:53:02 AM |
|
I think, I go for 2 PSUs, as big PSUs are hard to get in my country.
The question is, what people mean about the V12 lines? What exactly do I need to check when ording a PSU?
And are there tests somewhere specificaly for this use case maybe?
|
|
|
|
|
Minerist
Member
Offline
Activity: 80
Merit: 10
|
|
February 13, 2014, 01:01:54 AM |
|
http://litecoinminingparts.com is legit, bought from him not long ago and going to buy more, it ships next day so...
|
|
|
|
AtlantisPlatform
Member
Offline
Activity: 98
Merit: 10
|
|
February 13, 2014, 02:53:57 AM |
|
Ok, thanks... so maybe I should better go for 2 rigs, each 3 R9-280x, each with PSUs 850Watts?
My rigs have 3 r9 280x cards each. I have the sesonic gold 1050 psu. My 3 card rigs pull 940 watts at the wall, an 850 psu will not be big enough for 3 280 x cards.
|
|
|
|
|
gnomegawd
|
|
February 19, 2014, 04:11:12 PM |
|
every motherboard on market can use 4 video cards and even 5, but only a few ppl know how to get it working stable.
buying expensive motherboards is counter productive when a cheap mobo does the same job just fine.
|
|
|
|
|