arOpenCLMAX v0.1b - MAX coin OpenCL miner - Works with AMD, NVIDIA XPT - 1GH!

[archit]

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║  arOpenCLMAX(v0.1a)                              ║
║  author: archit,jh00 and little help from girino ║
║  http://ypool.net                                ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds


not working?


the x's are just blocking my stuff.

YPool is having some trouble recently

[CrystalCoin]

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║  arOpenCLMAX(v0.1a)                              ║
║  author: archit,jh00 and little help from girino ║
║  http://ypool.net                                ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds


not working?


the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?
edit again: -d 00,01,02,03,04 works! getting 336mh from 5x 270's. Seems low though?

[kendle]

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║  arOpenCLMAX(v0.1a)                              ║
║  author: archit,jh00 and little help from girino ║
║  http://ypool.net                                ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds


not working?


the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?

So if I want to run both my cards should I be placing "-d 0,1" into my startup line, or does it automatically start all available devices?

[kbhutto]

Payouts on ypool are extremely low..........on 1GH with 1/3 speed (CPU) I am getting much better payouts.

[archit]

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║  arOpenCLMAX(v0.1a)                              ║
║  author: archit,jh00 and little help from girino ║
║  http://ypool.net                                ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds


not working?


the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?
edit again: -d 00,01,02,03,04 works! getting 336mh from 5x 270's. Seems low though?

Seems really low

[archit]

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║  arOpenCLMAX(v0.1a)                              ║
║  author: archit,jh00 and little help from girino ║
║  http://ypool.net                                ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds


not working?


the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?

So if I want to run both my cards should I be placing "-d 0,1" into my startup line, or does it automatically start all available devices?

-d 0,1

[CrystalCoin]

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║  arOpenCLMAX(v0.1a)                              ║
║  author: archit,jh00 and little help from girino ║
║  http://ypool.net                                ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds


not working?


the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?
edit again: -d 00,01,02,03,04 works! getting 336mh from 5x 270's. Seems low though?

Seems really low

any other parameters I can run to get higher?
the usage on the cards are only like 85%

[rizardus]

archit

can u give us a miner that can by used on another pools?

[archit]

C:\miner>arOpenCLMAX -o http://ypool.net:8080 -u xxxx.xxxxx -p x -d 0
╔══════════════════════════════════════════════════╗
║  arOpenCLMAX(v0.1a)                              ║
║  author: archit,jh00 and little help from girino ║
║  http://ypool.net                                ║
╚══════════════════════════════════════════════════╝
Launching miner...
Initializing GPU 0
Initializing Device: Pitcairn
Platform 00: AMD Accelerated Parallel Processing
  Device 00: Pitcairn
  Device 01: Pitcairn
  Device 02: Pitcairn
  Device 03: Pitcairn
  Device 04: Pitcairn
  Device 05: AMD Sempron(tm) 145 Processor
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connection attempt failed, retry in 45 seconds


not working?


the x's are just blocking my stuff.

YPool is having some trouble recently

ahh okay, does this work with 1gh? well when it's up?

edit: looks like its working on ypool, but I'm only getting 60mh. only one card running?
edit again: -d 00,01,02,03,04 works! getting 336mh from 5x 270's. Seems low though?

Seems really low

any other parameters I can run to get higher?
the usage on the cards are only like 85%

Will do in future version

archit

can u give us a miner that can by used on another pools?

This should work on 1gh

[rizardus]

no, after this error it didnt do nothing

and same when i try mine solo

[archit]

no, after this error it didnt do nothing

and same when i try mine solo

Won't work solo it uses x.pushthrough

[CrystalCoin]

I'm mining, showing shares on ypool, but haven't gotten any max? just slow to update?

[Dukester797]

I'm mining, showing shares on ypool, but haven't gotten any max? just slow to update?

Yes.  They were showing faster last night.  Mine show about every 45 minutes now

[genoys]

how can I mine solo ? 

[smashyd]

Can anyone give a little info on how to set this up? I cant figure out how to put in worker details, cheers

[rizardus]

no, after this error it didnt do nothing

and same when i try mine solo

Won't work solo it uses x.pushthrough

is there any chance for version with support solo-mining?

[Dukester797]

Can anyone give a little info on how to set this up? I cant figure out how to put in worker details, cheers

arOpenCLMAX.exe -o http://ypool.net:8080 -u username.wallet -p password -d 0

if you have more than 1 card you need to use -d 0,1, and so on

[smashyd]

Thanks for that but the program crashes on start and i was thinking it is because i havent set up a config file. Is that line you have shown me supposed to be added to the miner.cl file?

[Dukester797]

Thanks for that but the program crashes on start and i was thinking it is because i havent set up a config file. Is that line you have shown me supposed to be added to the miner.cl file?

No.  Make a blank .txt file and put that line in.  When you save the file, use Save As, and then rename it to a .bat instead of .txt

Then double click your .bat file

[AtlasONo]

Appears to not work on 32 bit Windows 7. Works great on 64 bit.