arOpenCLMAX v0.1b - MAX coin OpenCL miner - Works with AMD, NVIDIA XPT - 1GH!

[reb0rn21]

for me 2x 290 give 900Mhs in cgminer
and only 480Mhz in Opnelcl miner, 2x instance all the same

[SirWilliam]

for me 2x 290 give 900Mhs in cgminer
and only 480Mhz in Opnelcl miner, 2x instance all the same

Same here, cgminer gives me twice the speed.

May I ask which pool to use with cgminer??? Dwarf doesn't seem to get any blocks and 1gh is down all the time also....

Can cgminer be used on ypool?

Thanks...

[The Doktor]

I also get twice the speed in cgminer, but around 70% reject rate

Ed

[herbitcoins]

for me 2x 290 give 900Mhs in cgminer
and only 480Mhz in Opnelcl miner, 2x instance all the same

Same here, cgminer gives me twice the speed.

May I ask which pool to use with cgminer??? Dwarf doesn't seem to get any blocks and 1gh is down all the time also....

Can cgminer be used on ypool?

Thanks...

You have to look at the rejected share ...

If you have 600 Mhz with cg miner but 100 rejected on 200 ... = 300 Mhz
After a quick test , arOpenCLMAX is well tuned, at the end you have more share ...

Bye

[reb0rn21]

cgminer I=13 reject rate at dwarw was 2% so it was good, also i have 20 max there in 1h thats also was better then ypool with OpenCl miner..., only problem in last 10min cgminer creshed twice, prolly bad compile or some bug!

[pttinh]

HOW to run cgminer on ypool?

[SirWilliam]

HOW to run cgminer on ypool?

That's what I want to know, or is it not possible??

[reb0rn21]

HOW to run cgminer on ypool?

That's what I want to know, or is it not possible??

Someone need to make XPT protocol for cgminer to be possible

[Suika]

HOW to run cgminer on ypool?

That's what I want to know, or is it not possible??

cgminer uses the stratum/getwork protocol to connect to a pool.  ypool does not support stratum/getwork.  It only supports x.PushThrough (XPT).
That is why it does not work on ypool.  There is a rumor that eventually someone will add support for it to xptminer, or that maybe there will be a proxy made to allow it, but for now, it won't work.

[srwt]

What about x86-version of this miner?

[nesco1805]

for me 2x 290 give 900Mhs in cgminer
and only 480Mhz in Opnelcl miner, 2x instance all the same

Same here, cgminer gives me twice the speed.

May I ask which pool to use with cgminer??? Dwarf doesn't seem to get any blocks and 1gh is down all the time also....

Can cgminer be used on ypool?

Thanks...

You have to look at the rejected share ...

If you have 600 Mhz with cg miner but 100 rejected on 200 ... = 300 Mhz
After a quick test , arOpenCLMAX is well tuned, at the end you have more share ...

Bye

no

[reputedchain]

anyone wanna help i have 2 7870s and i get this https://i.imgur.com/t329Jqx.png i have tried fresh driver install and rolled back the driver also does not work

[Suika]

anyone wanna help i have 2 7870s and i get this https://i.imgur.com/t329Jqx.png i have tried fresh driver install and rolled back the driver also does not work

Whatever folder you have arOpenCLMAX.exe in needs to have a subfolder called opencl which contains miner.cl.

Root
|--> opencl
|     +--> miner.cl
+--> arOpenCLMAX.exe

If you don't have this, you will get the errors shown in your screenshot because the miner can't find the cl script.

[antonio8]

I have a R9 280X but everytime I run it I get the "driver stopped responding"

Should I be on a certain driver? Using Windows 7 64bit

[xIronCrossx]

I'm using latest non-beta drivers (13.12) and the app sdk 2.7 (the one in this guide http://www.cryptobadger.com/2013/04/build-a-litecoin-mining-rig-windows/) and it works fine. I can confirm that multiple instances get about the same as a single instance with multiple devices. (i.e., 3 config files with d 0, 1 and 2 work the same as -d 0,1,2 in a single file)

[reb0rn21]

I have a R9 280X but everytime I run it I get the "driver stopped responding"

Should I be on a certain driver? Using Windows 7 64bit

13.12 driver here works fine

[doperider]

anyone tried this?

https://github.com/reorder/cgminer_keccak

[IronFists]

doperider

yes I have its runs 300mhs on my 7950 then either crashes after sometime or resets my pc lol.....

So far archits is most stable for me.

[doperider]

IronFists

I couldnt believe my eyes when I was mining with arOpenCLMAX and dumped max. 

maybe if some1 has the right tweaks for cgminer can post it here. till now - mine the shit out of max with arOpenCLMAX!!!

[ernie-]

anyone tried this?

https://github.com/reorder/cgminer_keccak

Yeah, it doesn't connect to most of the pools. I think I only got DwarfPool to connect with it, but DwarfPool have payout issues.


So any updates on a Windows 32bit version of arOpenCLMAX ?