Bitcoin Forum
October 31, 2020, 04:14:36 PM *
News: Latest Bitcoin Core release: 0.20.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: Small Farm - Big Problems / lost chips (000) in a S9/T9+  (Read 207 times)
Proclamer
Newbie
*
Offline Offline

Activity: 16
Merit: 1


View Profile
July 02, 2018, 04:43:17 PM
Last edit: July 03, 2018, 12:54:19 AM by frodocooper
 #1

Small Farm - Big Problems / lost chips (000) in a S9/T9+

Hello people;

this week we did major maintenance on the small farm. We turned off all the equipment and cleaned the air conditioners (after three months of work without maintenance, the air conditioners were very dirty).

We proceeded to do the monthly cleaning of each of the miners.

of maintenance left 3 of the 4 affected miners.

when we turned them on we found the following faults:

antminer S9: 13.5 TH

Code:
description:
Hardware Version 16.8.1.3
Kernel Version        Linux 3.14.0-xilinx-ge8a2f71-dirty #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
File System Version Fri Nov 17 17:37:49 CST 2017
Logic Version        S9_V2.54
BMminer Version 2.0.0

https://ibb.co/jtFfXJ

chain number 8 does not recognize all the chips, the board has 63 but that card only 29.

Why is this happening?

We have tested with other power supply, we have done soft reset and hard reset, we have loaded the factory values. We have reviewed the wiring to the machine. and the machine remains the same.

Code:
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8058ad0c68808814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[43] has core num=1
Chain[5] ASIC[46] has core num=15
Chain[5] ASIC[49] has core num=4
Chain[5] ASIC[56] has core num=3
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[42] has core num=1
Chain[6] ASIC[43] has core num=2
Chain[6] ASIC[51] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[9] has core num=15
Chain[7] ASIC[17] has core num=15
Chain[7] ASIC[60] has core num=1
Chain[7] ASIC[62] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-2,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-2,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-5,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1378 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 1620 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8058ad0c68808814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[5] speed=6120
get fan[2] speed=4440
get fan[5] speed=6120
get fan[2] speed=4440
get fan[5] speed=6120
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 29 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 29 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 29 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 29 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 29 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 29 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 29 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[43] has core num=1
Chain[J6] ASIC[46] has core num=15
Chain[J6] ASIC[49] has core num=4
Chain[J6] ASIC[56] has core num=3
Chain[J7] has core num in PIC
Chain[J7] ASIC[42] has core num=1
Chain[J7] ASIC[43] has core num=2
Chain[J7] ASIC[51] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[9] has core num=15
Chain[J8] ASIC[17] has core num=15
Chain[J8] ASIC[60] has core num=1
Chain[J8] ASIC[62] has core num=1
miner total rate=13587GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-2
Chain:5 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:5 max freq=643
Chain:5 min freq=643

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-2
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=29
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650
Chain:7 max freq=650
Chain:7 min freq=650


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-2
Chain:5 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Detect a bad chip=46 on chain[5], fixed to 400M
Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:5 max freq=643
Chain:5 min freq=643

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-2
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=29
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Detect a bad chip=9 on chain[7], fixed to 400M
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Detect a bad chip=17 on chain[7], fixed to 400M
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650
Chain:7 max freq=650
Chain:7 min freq=650

max freq = 650
set baud=1
Chain[J6] PIC temp offset=62,-2,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
Chain[J6] chip[244] use PIC middle temp offset=-2 typeID=55
New offset Chain[5] chip[244] local:34 remote:35 offset:30
Chain[J6] chip[244] get middle temp offset=30 typeID=55
Chain[J7] PIC temp offset=62,-2,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-2 typeID=55
New offset Chain[6] chip[244] local:32 remote:34 offset:28
Chain[J7] chip[244] get middle temp offset=28 typeID=55
single board rate=4539 voltage limit=890 on chain[5]
last_testpatten_highest_pcb_temp=59 too low, fix voltage=900 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 900
retryFlag=1 will set the voltage limited on chain[5], change voltage=900
now set pic voltage=74 on chain[5]
single board rate=4529 voltage limit=890 on chain[6]
last_testpatten_highest_pcb_temp=59 too low, fix voltage=900 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 900
retryFlag=1 will set the voltage limited on chain[6], change voltage=900
now set pic voltage=74 on chain[6]
single board rate=4518 voltage limit=890 on chain[7]
last_testpatten_highest_pcb_temp=59 too low, fix voltage=900 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 900
retryFlag=1 will set the voltage limited on chain[7], change voltage=900
now set pic voltage=74 on chain[7]
Chain[J6] set working voltage=900 [74]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=643 freq[29]=643 freq[30]=643 freq[31]=643
freq[32]=643 freq[33]=643 freq[34]=643 freq[35]=643 freq[36]=643 freq[37]=643 freq[38]=643 freq[39]=643
freq[40]=643 freq[41]=643 freq[42]=643 freq[43]=643 freq[44]=643 freq[45]=643 freq[46]=643 freq[47]=643
freq[48]=643 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26204
last_nonce_num:29053
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25855
last_nonce_num:24233
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=01 asic[01]=00 asic[02]=00 asic[03]=00 asic[04]=00 asic[05]=00 asic[06]=04 asic[07]=00
asic[08]=00 asic[09]=52 asic[10]=13 asic[11]=00 asic[12]=00 asic[13]=04 asic[14]=00 asic[15]=00
asic[16]=00 asic[17]=08 asic[18]=00 asic[19]=00 asic[20]=00 asic[21]=00 asic[22]=00 asic[23]=00
asic[24]=00 asic[25]=00 asic[26]=00 asic[27]=00 asic[28]=00 asic[29]=00 asic[30]=00 asic[31]=00
asic[32]=00 asic[33]=00 asic[34]=00 asic[35]=00 asic[36]=00 asic[37]=00 asic[38]=00 asic[39]=00
asic[40]=00 asic[41]=00 asic[42]=00 asic[43]=00 asic[44]=00 asic[45]=00 asic[46]=00 asic[47]=00
asic[48]=00 asic[49]=00 asic[50]=00 asic[51]=00 asic[52]=00 asic[53]=00 asic[54]=00 asic[55]=00
asic[56]=00 asic[57]=00 asic[58]=00 asic[59]=00 asic[60]=00 asic[61]=00 asic[62]=00


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650

total valid nonce number:82
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:33
last_nonce_num:162
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[7]...
Done open core on Chain[7]!
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=643 freq[29]=643 freq[30]=643 freq[31]=643
freq[32]=643 freq[33]=643 freq[34]=643 freq[35]=643 freq[36]=643 freq[37]=643 freq[38]=643 freq[39]=643
freq[40]=643 freq[41]=643 freq[42]=643 freq[43]=643 freq[44]=643 freq[45]=643 freq[46]=643 freq[47]=643
freq[48]=643 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26214
last_nonce_num:29260
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25863
last_nonce_num:34081
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=00 asic[01]=00 asic[02]=00 asic[03]=00 asic[04]=00 asic[05]=00 asic[06]=05 asic[07]=00
asic[08]=00 asic[09]=31 asic[10]=07 asic[11]=00 asic[12]=00 asic[13]=04 asic[14]=00 asic[15]=00
asic[16]=01 asic[17]=08 asic[18]=00 asic[19]=00 asic[20]=00 asic[21]=00 asic[22]=00 asic[23]=00
asic[24]=00 asic[25]=00 asic[26]=00 asic[27]=00 asic[28]=00 asic[29]=00 asic[30]=00 asic[31]=00
asic[32]=00 asic[33]=00 asic[34]=00 asic[35]=00 asic[36]=00 asic[37]=00 asic[38]=00 asic[39]=00
asic[40]=00 asic[41]=00 asic[42]=00 asic[43]=00 asic[44]=00 asic[45]=00 asic[46]=00 asic[47]=00
asic[48]=00 asic[49]=00 asic[50]=00 asic[51]=00 asic[52]=00 asic[53]=00 asic[54]=00 asic[55]=00
asic[56]=00 asic[57]=00 asic[58]=00 asic[59]=00 asic[60]=00 asic[61]=00 asic[62]=00


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!


freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650

total valid nonce number:56
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:20
last_nonce_num:0
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=410 total_tv_end_sys=411
restartNum = 2 , auto-reinit enabled...
PCB temp>60 will set the voltage limited on chain[5], change voltage=890
PCB temp>60 now set pic voltage=91 on chain[5]
PCB temp>60 will set the voltage limited on chain[6], change voltage=890
PCB temp>60 now set pic voltage=91 on chain[6]
PCB temp>60 will set the voltage limited on chain[7], change voltage=890
PCB temp>60 now set pic voltage=91 on chain[7]
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=76.9730 Asic[02]=74.2890 Asic[03]=74.0040 Asic[04]=74.7420 Asic[05]=70.4810 Asic[06]=71.0010 Asic[07]=75.1950 Asic[08]=72.7460
Asic[09]=68.8700 Asic[10]=74.6920 Asic[11]=74.0540 Asic[12]=72.0740 Asic[13]=75.9330 Asic[14]=67.2090 Asic[15]=70.5810 Asic[16]=77.7120
Asic[17]=69.1380 Asic[18]=72.0410 Asic[19]=68.0650 Asic[20]=72.4770 Asic[21]=71.6890 Asic[22]=67.6120 Asic[23]=77.7120 Asic[24]=70.5640
Asic[25]=76.9900 Asic[26]=72.3260 Asic[27]=71.0010 Asic[28]=75.3120 Asic[29]=73.0310 Asic[30]=71.7720 Asic[31]=79.8760 Asic[32]=73.9700
Asic[33]=74.4400 Asic[34]=73.9700 Asic[35]=71.6720 Asic[36]=76.2690 Asic[37]=71.9570 Asic[38]=76.3190 Asic[39]=75.0270 Asic[40]=68.6350
Asic[41]=79.1710 Asic[42]=71.7720 Asic[43]=72.9800 Asic[44]=76.0000 Asic[45]=73.0140 Asic[46]=75.4630 Asic[47]=40.1980 Asic[48]=75.6980
Asic[49]=71.2190 Asic[50]=71.9910 Asic[51]=75.2620 Asic[52]=74.8430 Asic[53]=71.2020 Asic[54]=71.8400 Asic[55]=72.3930 Asic[56]=70.8330
Asic[57]=76.2180 Asic[58]=79.6910 Asic[59]=73.2150 Asic[60]=73.7190 Asic[61]=75.3120 Asic[62]=69.0880 Asic[63]=70.9840

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=66.7730 Asic[02]=67.5280 Asic[03]=71.2690 Asic[04]=68.9710 Asic[05]=72.9640 Asic[06]=77.8790 Asic[07]=71.0170 Asic[08]=75.2620
Asic[09]=71.0850 Asic[10]=71.0170 Asic[11]=73.6010 Asic[12]=60.8840 Asic[13]=74.0710 Asic[14]=70.0110 Asic[15]=73.1480 Asic[16]=71.0510
Asic[17]=75.8490 Asic[18]=69.4070 Asic[19]=73.6680 Asic[20]=77.8460 Asic[21]=72.1250 Asic[22]=70.9000 Asic[23]=69.7930 Asic[24]=78.2650
Asic[25]=69.2560 Asic[26]=69.7090 Asic[27]=72.5610 Asic[28]=70.0280 Asic[29]=74.5240 Asic[30]=69.8090 Asic[31]=72.2090 Asic[32]=74.7760
Asic[33]=73.3330 Asic[34]=67.2090 Asic[35]=69.5240 Asic[36]=72.5110 Asic[37]=74.1720 Asic[38]=73.6350 Asic[39]=71.4540 Asic[40]=74.7590
Asic[41]=67.3100 Asic[42]=68.5340 Asic[43]=76.0510 Asic[44]=73.1650 Asic[45]=73.0140 Asic[46]=69.9940 Asic[47]=72.7790 Asic[48]=72.6450
Asic[49]=69.1050 Asic[50]=67.4270 Asic[51]=70.3300 Asic[52]=67.4100 Asic[53]=68.9040 Asic[54]=70.5310 Asic[55]=76.1680 Asic[56]=78.9360
Asic[57]=72.9640 Asic[58]=74.7920 Asic[59]=71.3870 Asic[60]=66.5710 Asic[61]=69.4070 Asic[62]=70.6990 Asic[63]=73.9700

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=1.82800 Asic[11]=301.989 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=2.34800 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=3.28800 Asic[18]=1.29100 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[11]=301.989000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=30
Chain[5] Chip[62] local Temp=62
Chain[5] Chip[62] middle Temp=76
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=28
Chain[6] Chip[62] local Temp=59
Chain[6] Chip[62] middle Temp=72
Done read temp on Chain[6]
do read temp on Chain[7]
Done read temp on Chain[7]
Set fixed fan speed=100
FAN PWM: 100
read_temp_func Done!
CRC error counter=37833
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1604160876
Hero Member
*
Offline Offline

Posts: 1604160876

View Profile Personal Message (Offline)

Ignore
1604160876
Reply with quote  #2

1604160876
Report to moderator
ccgllc
Copper Member
Member
**
Offline Offline

Activity: 546
Merit: 92

Math doesn't care what you believe.


View Profile WWW
July 02, 2018, 06:53:14 PM
Merited by OgNasty (1)
 #2

The hardest thing for any electrical gear to deal with, other than heat, is power cycleing.  When you power down, the fans stop running, and heat builds up briefly until natural convection eliminates it.

The net result is that you should expect most problems to show up after a power cycling event.  In this case, it appears you have a hash card failing.  You can try rebooting or power cycling it again and cross your fingers, but if it is persistant, the card needs to be repaired or replaced.

Mined for a living since 2017.  Primary developer of Bitcoin Rebooted (https://www.bitcoin-rebooted.xyz)
Blokforge Affiliate:  https://blokforge.com/?ref=21
Linux admin since 0.96 kernel and Slackware distributions on (4) floppies...
dutchlincoln
Member
**
Offline Offline

Activity: 434
Merit: 30


View Profile
July 11, 2018, 09:15:24 PM
 #3

better said: forced air intake in your farm rules...

Next time better disconnect network first, and power down after 10 minutes...
dutchlincoln
Member
**
Offline Offline

Activity: 434
Merit: 30


View Profile
September 16, 2018, 04:29:20 PM
Merited by Philopolymath (2)
 #4

i always reboot first when intended to power down. Fans go running 100% and hashing stips, giving a forced cool-down. Then, after 30 sec to a minute, i cut power.
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!