CCminer & Lyra2z

[Neat]

Hello guys,

So, I'm mining lyra2z with ccminer through Awesome miner and my GPU usage meter looks like this: https://gyazo.com/e7384f2bb7f972dce2661e4e3933801c

Is this normal?

After 15 - 30 minutes I got a flood message which say "unspecified launch failure"

Here is my setup:

GPU : 6x MSI 1080 ti Gaming X
MOBO : MSI Z170A Gaming M7
RAM : 1x 8GB
CPU : Intel Core i3-7100
SSD : 120 GB
PSU : 2x Corsair 1000W + 1x Corsair 1200W
OS : Windows 10 Pro

What do you think would be the issue here?

Any help would be appreciated.

[1715086907]

1715086907

[1715086907]

1715086907

[1715086907]

1715086907

[Neat]

Here is what happen right before the flood: https://gyazo.com/7ce7f599497d984c7806006b2a2d3897

That's after two hours from mining.

[socks435]

I think that is why you are having an error after few minutes its because your miner is getting more hotter.
Are you using Afterburner? Try to change the temp limit on afterburner to 65 degrees.

Hotter temp on GPU could leads to temperature protection so this is might be the reason why your miner stop after few minutes.

[Neat]

I think that is why you are having an error after few minutes its because your miner is getting more hotter.
Are you using Afterburner? Try to change the temp limit on afterburner to 65 degrees.

Hotter temp on GPU could leads to temperature protection so this is might be the reason why your miner stop after few minutes.

I'm keeping my GPUs under 55 degrees.

Here is my MSI Afterburner settings:

Power limit: %60
Core: 160
Memory Clock: -300

Thanks.

[markiz73]

try to remove the overclocking on the core
Power limit: %65
Core: 50-90   not more than 100

also  try  KlausT mod      https://github.com/KlausT/ccminer/releases  if you used https://github.com/tpruvot/ccminer/releases

[shibob]

I think that is why you are having an error after few minutes its because your miner is getting more hotter.
Are you using Afterburner? Try to change the temp limit on afterburner to 65 degrees.

Hotter temp on GPU could leads to temperature protection so this is might be the reason why your miner stop after few minutes.

I'm keeping my GPUs under 55 degrees.

Here is my MSI Afterburner settings:

Power limit: %60
Core: 160
Memory Clock: -300

Thanks.

The power limit which was set in MSI afterburner doesnt really work with MSI 1080 ti Gaming X. I have couple of this gpu (and msi 1070 seahawk), maybe you could try to do several tests like reduce further power limit, but I think the problem may relate to intensity. What's your intensity setting. And dont lower too much your mem clock.

[Neat]

try to remove the overclocking on the core
Power limit: %65
Core: 50-90   not more than 100

also  try  KlausT mod      https://github.com/KlausT/ccminer/releases  if you used https://github.com/tpruvot/ccminer/releases

I have just changed Power limit to %65 and core to 84

Seems KlausT mod doesn't support lyra2z algorithm because ccminer close when I try to mine it.

Let's see how it goes.

[Neat]

I think that is why you are having an error after few minutes its because your miner is getting more hotter.
Are you using Afterburner? Try to change the temp limit on afterburner to 65 degrees.

Hotter temp on GPU could leads to temperature protection so this is might be the reason why your miner stop after few minutes.

I'm keeping my GPUs under 55 degrees.

Here is my MSI Afterburner settings:

Power limit: %60
Core: 160
Memory Clock: -300

Thanks.

The power limit which was set in MSI afterburner doesnt really work with MSI 1080 ti Gaming X. I have couple of this gpu (and msi 1070 seahawk), maybe you could try to do several tests like reduce further power limit, but I think the problem may relate to intensity. What's your intensity setting. And dont lower too much your mem clock.

I have set it at %65. Also I have set the core clock at 84, hopefully it work.

The intensity is 16. I tried to lower it to 1 but ccminer ignored it and set to 16.

[markiz73]

try to remove the overclocking on the core
Power limit: %65
Core: 50-90   not more than 100

also  try  KlausT mod      https://github.com/KlausT/ccminer/releases  if you used https://github.com/tpruvot/ccminer/releases

I have just changed Power limit to %65 and core to 84

Seems KlausT mod doesn't support lyra2z algorithm because ccminer close when I try to mine it.

Let's see how it goes.

Sorry, I mixed up the algorithms.Klaus mod does not support Lyra2z. Try coolMiner. https://bitcointalk.org/index.php?topic=4412370

[Neat]

try to remove the overclocking on the core
Power limit: %65
Core: 50-90   not more than 100

also  try  KlausT mod      https://github.com/KlausT/ccminer/releases  if you used https://github.com/tpruvot/ccminer/releases

I have just changed Power limit to %65 and core to 84

Seems KlausT mod doesn't support lyra2z algorithm because ccminer close when I try to mine it.

Let's see how it goes.

Sorry, I mixed up the algorithms.Klaus mod does not support Lyra2z. Try coolMiner. https://bitcointalk.org/index.php?topic=4412370

Thanks for your recommendation, coolMiner makes my gpu usage kinda stable than ccminer. Seems it only support lyra2z because It doesn't work with any other algorithms.

Any other good miner software can be recommended which will work with other algorithms because I'm using Awesome miner?