WildRig: new miner for Wild Keccak algo

[andrucrypt]

Scratchpad size increased, so now time to try recommended settings as for BBR coin. Set --opencl-launch to 512x32

[menztc6]

Why job reject "Incorrect Share"
Mine BBR

https://www.img.live/image/vs3wa
https://www.img.live/images/2018/11/13/1542084363365.th.jpg

[andrucrypt]

Why job reject "Incorrect Share"
Mine BBR

https://www.img.live/image/vs3wa
https://www.img.live/images/2018/11/13/1542084363365.th.jpg

Long story short - pool problem, and only mining.blue fixed it till now. A bit longer story - that can happen because of not suitable intensity, or just because your GPU's found a share right before/after pool updated it scratchpad and send you new job. And because of different scratchpad's(your and pool) you can get reject. Anyway, this is not a big problem if you get it near "new job" message. If you get it in the middle of other "accepted" - this is another story and this is bad sign.

[igotek]

Scratchpad size increased, so now time to try recommended settings as for BBR coin. Set --opencl-launch to 512x32

is it for amd or nvidia ?
my rigs are on the same setting which we set it up first.

[tbearhere]

My 570 4Gb are better than my 570 8Gb, is it normal ?
Same core but higher memory frequency on 8Gb.
2.3-2.4MHs on 4Gb
1.9-2.1MHs on 8Gb
256x0 on both. Tried 384x0 on 8Gb, very few change on hashrate.

EDIT : well, it seems I have big differences between my differents x70 4Gb, and my first test was on my bests ...

Did you try 512x0  or 1024x0  or 512x512 ? 

[tbearhere]

My 570 4Gb are better than my 570 8Gb, is it normal ?
Same core but higher memory frequency on 8Gb.
2.3-2.4MHs on 4Gb
1.9-2.1MHs on 8Gb
256x0 on both. Tried 384x0 on 8Gb, very few change on hashrate.

EDIT : well, it seems I have big differences between my differents x70 4Gb, and my first test was on my bests ...

Your mining speed is so fast! Can you tell me what algorithm you are mining?

Scrypt algo 

[Juniormkl]

WildRig Multi AMD 0.12.9 Beta added to https://www.minermonitoring.com/ https://www.ethmonitoring.com/ Join our discord https://discord.gg/aGGaeqq
also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[ManDoneKTM]

WildRig Multi AMD 0.12.9 Beta added to https://www.minermonitoring.com/ https://www.ethmonitoring.com/ Join our discord https://discord.gg/aGGaeqq
also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

Tottaly fake your page or that page . I have rx570 4gb cards , mining at 31.9 mhs / 93w , on that page says are mining at 21.4 mhs / 103w . SERIOUSLY ?!

[tbearhere]

Anyone know what is causing this plz...thx.  

 [boolberry.miner.rocks:5555] failed to send packet ( 361 bytes )

windows 8.1 wildrig-andrucrypt-0.10.1

EDIT:I got it....it was my antivirus update... had to allow that app.

[powerstr]

Initialize diagnostics (10)
Starting Diagnostics. Awesome Miner Remote Agent version: 6.0.8
OS: Microsoft Windows 10 Enterprise 64-bit
AMD driver version: BETA
Microsoft VC++ 2013 runtime installed: Yes
Microsoft VC++ 2015 runtime installed: No
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: WildRigMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Properties: (WindowMode: ConsoleFormat, EngineType: WildRigMiner, IsProfitMiner: True)
====================================================================================================
C:\Users\NATALY\AppData\Roaming\AwesomeMinerService\wildrig-0.15.0.6-beta_1\wildrig_avx.exe  -a aergo -o stratum+tcp://aergo.eu.mine.zpool.ca:3691 -u 15NRifmpqUx8DeNg1E6EZM2wNoykf2muDy -p c=BTC --api-port=4028
====================================================================================================
>  * VERSIONS:     WildRig/0.15.0.6 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
>  * CPU:          Intel(R) Celeron(R) CPU G1840 @ 2.80GHz x64 -AES-NI
>  * ALGO:         aergo
>  * POOL #1:      aergo.eu.mine.zpool.ca:3691
>  * API PORT:     4028
>  * COMMANDS:     'h' hashrate, 'p' pause, 'r' resume
Mining Engine Process started, PID: 7724
> [08:15:24] donation: 2%
> [08:15:24] strategy: 0
> [08:15:24] send-stale: no
> [08:15:24] watchdog: disabled
> [08:15:24] good-risers: default
> [08:15:24] compiling code and initializing GPUs. This will take a while...
> [08:15:24] GPU #0 [BusID: #1] [Hawaii] AMD Radeon (TM) R9 390 Series
> [08:15:24] threads: 1, intensity: 18, worksize: 0/256, cu: 44, memory: 8192Mb
> [08:15:24] Error CL_INVALID_KERNEL_NAME when calling clCreateKernel for kernel 'mtp_yloop'
> [08:15:24] Failed to start OpenCL threads

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed

[igotek]

is there any news about temp ?
two gpu fans failed and i didnt notice. gpus are out of order now

[igotek]

is it possiblee to order GPUs acording to hwinfo and or OverDriveNToll order ?

[andrucrypt]

is it possiblee to order GPUs acording to hwinfo and or OverDriveNToll order ?

It should be already like there. What about temp's and so on - all my free time goes to multi-version of miner right now, don't know when I will spend some time on this version.

[andrucrypt]

One of my rigs has SSD problem. I had to change it.
I installed HiveOs latest version => (0.6-10)

Now, I cannot install Wildrig. Check screenshot pls ?

Image: https://i.hizliresim.com/P1MOPQ.png

sudo apt install libuv1 => ok
sudo apt install libmicrohttpd10 => cannot intall

Try to run this two lines

Code: (bash)

wget http://mirrors.kernel.org/ubuntu/pool/universe/libm/libmicrohttpd/libmicrohttpd10_0.9.44+dfsg-1ubuntu2_amd64.deb
dpkg -i libmicrohttpd10_0.9.44+dfsg-1ubuntu2_amd64.deb

[igotek]

One of my rigs has SSD problem. I had to change it.
I installed HiveOs latest version => (0.6-10)

Now, I cannot install Wildrig. Check screenshot pls ?

Image: https://i.hizliresim.com/P1MOPQ.png

sudo apt install libuv1 => ok
sudo apt install libmicrohttpd10 => cannot intall

[igotek]

it gives error:

dpkg -i li
dpkg: error: cannot access archive 'li': No such file or directory

Code:

wget http://mirrors.kernel.org/ubuntu/pool/universe/libm/libmicrohttpd/libmicrohttpd10_0.9.44+dfsg-1ubuntu2_amd64.deb
dpkg -i libmicrohttpd10_0.9.44+dfsg-1ubuntu2_amd64.deb

By the way, i use "sudo apt install libmicrohttpd12" command. and it worked. Now i have different problem:

Code:

custom-get https://github.com/andru-kun/wildrig/releases/download/0.
10.5/wildrig-0.10.5_beta.tar.gz
custom-get: command not found

[igotek]

Code:

Custom integration is no longer supported.
Since HIveOS 0.6-01 this miner have been added to HiveOS mainline. All new versions of the miner will be released with HiveOS updates.

I found this info for wildrig multi version. and wildrig multi is built in hiveos now.
But i couldnt see wildrig wildkeccak.

[andrucrypt]

Code:

Custom integration is no longer supported.
Since HIveOS 0.6-01 this miner have been added to HiveOS mainline. All new versions of the miner will be released with HiveOS updates.

I found this info for wildrig multi version. and wildrig multi is built in hiveos now.
But i couldnt see wildrig wildkeccak.

That's a multi-algo version, it doesn't support wild keccak. About custom integration, now for HiveOS you need to use

Code: (bash)

/hive/miners/custom/custom-get https://github.com/andru-kun/wildrig/releases/download/0.10.5/wildrig-0.10.5_beta.tar.gz

dpkg -i li
dpkg: error: cannot access archive 'li': No such file or directory

Man, use correct commands... where did you saw dpk -i li in my message?

By the way, i use "sudo apt install libmicrohttpd12" command.

This version won't work with wildrig.

[igotek]

Code:

wget http://mirrors.kernel.org/ubuntu/pool/universe/libm/libmicrohttpd/libmicrohttpd10_0.9.44+dfsg-1ubuntu2_amd64.deb
dpkg -i libmicrohttpd10_0.9.44+dfsg-1ubuntu2_amd64.deb

This command works and the file saved. How to install it ?

[andrucrypt]

Code:

wget http://mirrors.kernel.org/ubuntu/pool/universe/libm/libmicrohttpd/libmicrohttpd10_0.9.44+dfsg-1ubuntu2_amd64.deb
dpkg -i libmicrohttpd10_0.9.44+dfsg-1ubuntu2_amd64.deb

This command works and the file saved. How to install it ?

This one part for installation:

Code: (bash)

dpkg -i libmicrohttpd10_0.9.44+dfsg-1ubuntu2_amd64.deb

when file downloaded by previous command