KNC Miner - temperature controller - solves problem with DIE off

[mzahor]

Hi Guys,

I've created MCU controlled temperature regulator.

Controller adjusts fan speed to achieve target (selected) ASIC temperature.

It resolves issue with "DIE off" problem ( some DIEs need higher temperature ).

Howto connect sensors: https://vimeo.com/83987115
Howto setup: http://youtu.be/WT6SBwGRemU

http://farm3.staticflickr.com/2817/12480793495_3a29c8ed1a.jpg
http://farm4.staticflickr.com/3738/11911240385_bd471f0e5d.jpghttp://farm3.staticflickr.com/2844/11911693174_9872cd3e39.jpghttp://farm6.staticflickr.com/5537/11911239795_56f4e01d7d.jpg

3 sensors version - 95 EUR [ or BTC eqiv. ] - you can control 3 modules
[ chosen hardware is unable to handle more then 3 sensors + fan control ]

If you are interested: mzahor@dtech.sk

[1715460643]

1715460643

[1715460643]

1715460643

[joeventura]

looks like a great solution but there is no guarantee it would fix the problem and the cost is probably 5 times the revenue a resurrected die would make.

[mzahor]

It depends on how many DIEs are off.

[DPoS]

Good idea but there's nothing scientific yet on bringing back dies. I would be a customer since I do have three boards with a die off but I have to do some tinkering with each one to see if they are fixable

 

[mzahor]

Yes it seems that there are more  different problems with ASIC. One can try heating up ASCI by covering fan or disconnecting it ( ASIC FAN )- if it will lead to start the DIE than controller is solution