MAXCOIN WALLET NOT SYNCHING

[BitcoinSteve]

You might need to leave it open for about an hour.

still says no block source code though.. are they trying to fix this?  if anyone can help me step by step I will donate

[fendlestick]

In the same folder as the .conf replace your peers.dat with this peers.dat www.cryptosextoys.com/maxcoin/peers.zip

Make sure to give it some time to sync! It takes ages...................And I mean ages to start syncing.

[cubicdissection]

I just wanna buy 100 or so then sell once they are over $10 its not rocket science

I hope that happens for you.  Good luck! 

[Vivisector999]

Ok I am at home now.

Here is my maxcoin.conf file

rpcuser=maxcoinrpc   
rpcpassword=Password
rpcport=8669
rpcallowip=localhost
server=1
addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=151.236.222.216
addnode=87.247.111.39
addnode=115.77.50.218
addnode=107.170.41.175
addnode=49.69.110.241
addnode=190.245.206.9
addnode=49.49.175.102
addnode=144.76.45.199
addnode=183.8.179.161:61610
addnode=188.226.132.195
addnode=94.52.19.22
addnode=162.243.64.158
addnode=194.102.32.44
addnode=119.196.119.17
addnode=217.198.117.29
addnode=115.28.8.149
addnode=183.25.152.244:49198
addnode=58.76.245.137:59963

Just make sure you change the Password to something else.  Hope that works for you.  It worked as soon as I made those changes. 

[XCASH]

Ok once you're in Appdata, make sure you go into the Maxcoin directory.

From there create a notepad document named maxcoin.conf

Add this in the Notepad file

rpcuser=maxuser
rpcpassword=<password>
rpcport=8669
rpcallowip=127.0.0.1
server=1
addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25
addnode=213.192.56.163:8334
addnode=107.170.15.110:8668
addnode=131.111.33.245:8668
addnode=137.116.204.146:8668
addnode=138.91.116.247:8668
addnode=144.76.107.81:8668
addnode=144.76.113.132:8668
addnode=144.76.238.140:8668
addnode=148.251.11.196:8668
addnode=162.251.118.42:8668
addnode=187.104.154.105:8668
addnode=162.243.98.115:8668
addnode=94.226.111.26:8668
addnode=108.166.119.210:8668
addnode=54.242.57.209:8668
addnode=109.204.130.61:8668
addnode=62.24.83.120:8668
addnode=107.170.0.102:8668
addnode=37.139.10.249:8668
addnode=62.210.162.235:8668
addnode=54.80.38.63:8668
addnode=54.196.40.143:8668
addnode=23.97.130.72:8668
addnode=95.85.14.92
addnode=95.85.38.7
addnode=95.85.41.61
addnode=95.85.40.179
addnode=95.85.42.240
addnode=95.85.43.202
addnode=95.85.43.189
addnode=95.85.25.162
addnode=107.170.246.18
addnode=107.170.245.188
addnode=107.170.245.192
addnode=107.170.10.242
addnode=192.241.174.133
addnode=95.85.45.177
addnode=213.179.202.19
addnode=91.121.8.25
addnode=91.121.8.25
addnode=wombat.dar.sh
addnode=188.226.147.81:36424
addnode=84.229.7.198:8668
addnode=187.104.154.105:51331
addnode=54.204.58.216:53712
addnode=54.213.139.176:53099
addnode=54.193.94.239:41078
addnode=50.17.172.165:60285
addnode=54.193.60.193:56916
addnode=151.225.12.223:53949
addnode=2.82.203.159:65250
addnode=137.135.71.140:1176
addnode=82.196.7.83:39193
addnode=68.230.151.179:50492
addnode=188.226.146.70:8668
addnode=213.192.56.163
addnode=148.251.11.43
addnode=188.226.147.41
addnode=187.104.154.105
addnode=137.226.216.235
addnode=94.23.18.51
addnode=162.243.98.115:8668
addnode=94.226.111.26:8668
addnode=108.166.119.210:8668
addnode=54.242.57.209:8668
addnode=109.204.130.61:8668
addnode=62.24.83.120:8668
addnode=107.170.0.102:8668
addnode=37.139.10.249:8668
addnode=62.210.162.235:8668
addnode=54.80.38.63:8668
addnode=54.196.40.143:8668
addnode=23.97.130.72:8668


Then click save.  Now try opening the Wallet.

Did that, copied and pasted word for word, saved, reopened, still wont synch

You probably already know, but you have to save the notepad document named maxcoin.conf as file type "All files", not as "Text Documents (*.txt)". Just select "All files" from the file type drop down list in the notepad file save dialogue.

[BitcoinSteve]

In the same folder as the .conf replace your peers.dat with this peers.dat www.cryptosextoys.com/maxcoin/peers.zip

Make sure to give it some time to sync! It takes ages...................And I mean ages to start syncing.

no sextoys lol..nvm seems to hard, FUCK max sheister and his coin...

[BitcoinSteve]

Ok once you're in Appdata, make sure you go into the Maxcoin directory.

From there create a notepad document named maxcoin.conf

Add this in the Notepad file

rpcuser=maxuser
rpcpassword=<password>
rpcport=8669
rpcallowip=127.0.0.1
server=1
addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25
addnode=213.192.56.163:8334
addnode=107.170.15.110:8668
addnode=131.111.33.245:8668
addnode=137.116.204.146:8668
addnode=138.91.116.247:8668
addnode=144.76.107.81:8668
addnode=144.76.113.132:8668
addnode=144.76.238.140:8668
addnode=148.251.11.196:8668
addnode=162.251.118.42:8668
addnode=187.104.154.105:8668
addnode=162.243.98.115:8668
addnode=94.226.111.26:8668
addnode=108.166.119.210:8668
addnode=54.242.57.209:8668
addnode=109.204.130.61:8668
addnode=62.24.83.120:8668
addnode=107.170.0.102:8668
addnode=37.139.10.249:8668
addnode=62.210.162.235:8668
addnode=54.80.38.63:8668
addnode=54.196.40.143:8668
addnode=23.97.130.72:8668
addnode=95.85.14.92
addnode=95.85.38.7
addnode=95.85.41.61
addnode=95.85.40.179
addnode=95.85.42.240
addnode=95.85.43.202
addnode=95.85.43.189
addnode=95.85.25.162
addnode=107.170.246.18
addnode=107.170.245.188
addnode=107.170.245.192
addnode=107.170.10.242
addnode=192.241.174.133
addnode=95.85.45.177
addnode=213.179.202.19
addnode=91.121.8.25
addnode=91.121.8.25
addnode=wombat.dar.sh
addnode=188.226.147.81:36424
addnode=84.229.7.198:8668
addnode=187.104.154.105:51331
addnode=54.204.58.216:53712
addnode=54.213.139.176:53099
addnode=54.193.94.239:41078
addnode=50.17.172.165:60285
addnode=54.193.60.193:56916
addnode=151.225.12.223:53949
addnode=2.82.203.159:65250
addnode=137.135.71.140:1176
addnode=82.196.7.83:39193
addnode=68.230.151.179:50492
addnode=188.226.146.70:8668
addnode=213.192.56.163
addnode=148.251.11.43
addnode=188.226.147.41
addnode=187.104.154.105
addnode=137.226.216.235
addnode=94.23.18.51
addnode=162.243.98.115:8668
addnode=94.226.111.26:8668
addnode=108.166.119.210:8668
addnode=54.242.57.209:8668
addnode=109.204.130.61:8668
addnode=62.24.83.120:8668
addnode=107.170.0.102:8668
addnode=37.139.10.249:8668
addnode=62.210.162.235:8668
addnode=54.80.38.63:8668
addnode=54.196.40.143:8668
addnode=23.97.130.72:8668


Then click save.  Now try opening the Wallet.

Did that, copied and pasted word for word, saved, reopened, still wont synch

You probably already know, but you have to save the notepad document named maxcoin.conf as file type "All files", not as "Text Documents (*.txt)". Just select "All files" from the file type drop down list in the notepad file save dialogue.

tried said it already exists and to replace I clicked yes then it saves it as a text again ahhhhh

[XCASH]

Ok once you're in Appdata, make sure you go into the Maxcoin directory.

From there create a notepad document named maxcoin.conf

Add this in the Notepad file

rpcuser=maxuser
rpcpassword=<password>
rpcport=8669
rpcallowip=127.0.0.1
server=1
addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25
addnode=213.192.56.163:8334
addnode=107.170.15.110:8668
addnode=131.111.33.245:8668
addnode=137.116.204.146:8668
addnode=138.91.116.247:8668
addnode=144.76.107.81:8668
addnode=144.76.113.132:8668
addnode=144.76.238.140:8668
addnode=148.251.11.196:8668
addnode=162.251.118.42:8668
addnode=187.104.154.105:8668
addnode=162.243.98.115:8668
addnode=94.226.111.26:8668
addnode=108.166.119.210:8668
addnode=54.242.57.209:8668
addnode=109.204.130.61:8668
addnode=62.24.83.120:8668
addnode=107.170.0.102:8668
addnode=37.139.10.249:8668
addnode=62.210.162.235:8668
addnode=54.80.38.63:8668
addnode=54.196.40.143:8668
addnode=23.97.130.72:8668
addnode=95.85.14.92
addnode=95.85.38.7
addnode=95.85.41.61
addnode=95.85.40.179
addnode=95.85.42.240
addnode=95.85.43.202
addnode=95.85.43.189
addnode=95.85.25.162
addnode=107.170.246.18
addnode=107.170.245.188
addnode=107.170.245.192
addnode=107.170.10.242
addnode=192.241.174.133
addnode=95.85.45.177
addnode=213.179.202.19
addnode=91.121.8.25
addnode=91.121.8.25
addnode=wombat.dar.sh
addnode=188.226.147.81:36424
addnode=84.229.7.198:8668
addnode=187.104.154.105:51331
addnode=54.204.58.216:53712
addnode=54.213.139.176:53099
addnode=54.193.94.239:41078
addnode=50.17.172.165:60285
addnode=54.193.60.193:56916
addnode=151.225.12.223:53949
addnode=2.82.203.159:65250
addnode=137.135.71.140:1176
addnode=82.196.7.83:39193
addnode=68.230.151.179:50492
addnode=188.226.146.70:8668
addnode=213.192.56.163
addnode=148.251.11.43
addnode=188.226.147.41
addnode=187.104.154.105
addnode=137.226.216.235
addnode=94.23.18.51
addnode=162.243.98.115:8668
addnode=94.226.111.26:8668
addnode=108.166.119.210:8668
addnode=54.242.57.209:8668
addnode=109.204.130.61:8668
addnode=62.24.83.120:8668
addnode=107.170.0.102:8668
addnode=37.139.10.249:8668
addnode=62.210.162.235:8668
addnode=54.80.38.63:8668
addnode=54.196.40.143:8668
addnode=23.97.130.72:8668


Then click save.  Now try opening the Wallet.

Did that, copied and pasted word for word, saved, reopened, still wont synch

You probably already know, but you have to save the notepad document named maxcoin.conf as file type "All files", not as "Text Documents (*.txt)". Just select "All files" from the file type drop down list in the notepad file save dialogue.

tried said it already exists and to replace I clicked yes then it saves it as a text again ahhhhh

You have to use the drop down list. Click the words "text documents" where it says "save as type: text documents". That shows the drop down list in the image below. Then you select "All files" shown by the red arrow.

[BitcoinSteve]

Ok once you're in Appdata, make sure you go into the Maxcoin directory.

From there create a notepad document named maxcoin.conf

Add this in the Notepad file

rpcuser=maxuser
rpcpassword=<password>
rpcport=8669
rpcallowip=127.0.0.1
server=1
addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25
addnode=213.192.56.163:8334
addnode=107.170.15.110:8668
addnode=131.111.33.245:8668
addnode=137.116.204.146:8668
addnode=138.91.116.247:8668
addnode=144.76.107.81:8668
addnode=144.76.113.132:8668
addnode=144.76.238.140:8668
addnode=148.251.11.196:8668
addnode=162.251.118.42:8668
addnode=187.104.154.105:8668
addnode=162.243.98.115:8668
addnode=94.226.111.26:8668
addnode=108.166.119.210:8668
addnode=54.242.57.209:8668
addnode=109.204.130.61:8668
addnode=62.24.83.120:8668
addnode=107.170.0.102:8668
addnode=37.139.10.249:8668
addnode=62.210.162.235:8668
addnode=54.80.38.63:8668
addnode=54.196.40.143:8668
addnode=23.97.130.72:8668
addnode=95.85.14.92
addnode=95.85.38.7
addnode=95.85.41.61
addnode=95.85.40.179
addnode=95.85.42.240
addnode=95.85.43.202
addnode=95.85.43.189
addnode=95.85.25.162
addnode=107.170.246.18
addnode=107.170.245.188
addnode=107.170.245.192
addnode=107.170.10.242
addnode=192.241.174.133
addnode=95.85.45.177
addnode=213.179.202.19
addnode=91.121.8.25
addnode=91.121.8.25
addnode=wombat.dar.sh
addnode=188.226.147.81:36424
addnode=84.229.7.198:8668
addnode=187.104.154.105:51331
addnode=54.204.58.216:53712
addnode=54.213.139.176:53099
addnode=54.193.94.239:41078
addnode=50.17.172.165:60285
addnode=54.193.60.193:56916
addnode=151.225.12.223:53949
addnode=2.82.203.159:65250
addnode=137.135.71.140:1176
addnode=82.196.7.83:39193
addnode=68.230.151.179:50492
addnode=188.226.146.70:8668
addnode=213.192.56.163
addnode=148.251.11.43
addnode=188.226.147.41
addnode=187.104.154.105
addnode=137.226.216.235
addnode=94.23.18.51
addnode=162.243.98.115:8668
addnode=94.226.111.26:8668
addnode=108.166.119.210:8668
addnode=54.242.57.209:8668
addnode=109.204.130.61:8668
addnode=62.24.83.120:8668
addnode=107.170.0.102:8668
addnode=37.139.10.249:8668
addnode=62.210.162.235:8668
addnode=54.80.38.63:8668
addnode=54.196.40.143:8668
addnode=23.97.130.72:8668


Then click save.  Now try opening the Wallet.

Did that, copied and pasted word for word, saved, reopened, still wont synch

You probably already know, but you have to save the notepad document named maxcoin.conf as file type "All files", not as "Text Documents (*.txt)". Just select "All files" from the file type drop down list in the notepad file save dialogue.

tried said it already exists and to replace I clicked yes then it saves it as a text again ahhhhh

You have to use the drop down list. Click the words "text documents" where it says "save as type: text documents". That shows the drop down list in the image below. Then you select "All files" shown by the red arrow.

yeah did that still wont work,, is that the only way? does max think people can figure this crap out?

[XCASH]

I think someone needs to make bitcoin software much easier to use so everyone can use it.

As for the file you need to paste maxcoin.conf into the filename field, then click the dropdown list and change the file type to "all files". Then you click save.

[BitcoinSteve]

I think someone needs to make bitcoin software much easier to use so everyone can use it.

As for the file you need to paste maxcoin.conf into the filename field, then click the dropdown list and change the file type to "all files". Then you click save.

I wish someone could do a step by exact step.. donations still apply..

[XCASH]

Your computer may not be set to show file extensions. I am using windows 8, so it might look a bit different on another windows version. If you can find the folder options in your control panel you can disable the hide file extensions setting. The red arrow in the image shows where to click.

After that you can see all the file extensions, and if you slowly click a text file twice you can change the extension from .txt to .conf

[BitcoinSteve]

Your computer may not be set to show file extensions. I am using windows 8, so it might look a bit different on another windows version. If you can find the folder options in your control panel you can disable the hide file extensions setting. The red arrow in the image shows where to click.

After that you can see all the file extensions, and if you slowly click a text file twice you can change the extension from .txt to .conf

wait will the wallet work on windows 8?  can I just try redownloading it on my laptop instead?

[XCASH]

It works on my windows 8 laptop. It should work on yours. Just make sure you save the wallet.dat file from each wallet with any money in. If you lose the wallet.dat file there is no way to get your money back. I think I might have just lost one of mine and it's a downer.

[BitcoinSteve]

It works on my windows 8 laptop. It should work on yours. Just make sure you save the wallet.dat file from each wallet with any money in. If you lose the wallet.dat file there is no way to get your money back. I think I might have just lost one of mine and it's a downer.

I mean without doing the config file shit? just download the wallet and open it?

[XCASH]

I'm not sure about that. It works without the config shit for some coins, but not for others. I haven't tried max yet, but you could give it a go.

[BitcoinSteve]

I'm not sure about that. It works without the config shit for some coins, but not for others. I haven't tried max yet, but you could give it a go.

ok thanks

[jngwj2002]

In the same folder as the .conf replace your peers.dat with this peers.dat www.cryptosextoys.com/maxcoin/peers.zip

Make sure to give it some time to sync! It takes ages...................And I mean ages to start syncing.

THANKS for your job!THANKS!

[anhloriot]

my wallet has stopped working after created file conf, pls help

[BitcoinSteve]

my wallet has stopped working after created file conf, pls help

u sucketh