GPU hangs in random hours

[anakbaruza]

anyone know what happen ?
my Claymore 2 times restarting like this, and my Claymore can't run time over 24x7, even 24hours ony
I using SAPPHIRE RX580 nitro+ Special Edition 8GB
07:21:02:636   8b8   ETH - Total Speed: 157.359 Mh/s, Total Shares: 121, Rejected: 0, Time: 00:43
07:21:02:636   8b8   ETH: GPU0 0.000 Mh/s, GPU1 31.470 Mh/s, GPU2 31.441 Mh/s, GPU3 31.477 Mh/s, GPU4 31.483 Mh/s, GPU5 31.488 Mh/s
07:21:02:777   1898   em hbt: 16, fm hbt: 16,
07:21:02:777   1898   watchdog - thread 0 (gpu0), hb time 60438
07:21:02:777   1898   WATCHDOG: GPU 0 hangs in OpenCL call, exit
07:21:02:777   1898   watchdog - thread 1 (gpu0), hb time 60125
07:21:02:777   1898   WATCHDOG: GPU 0 hangs in OpenCL call, exit
07:21:02:777   1898   watchdog - thread 2 (gpu1), hb time 141
07:21:02:777   1898   watchdog - thread 3 (gpu1), hb time 141
07:21:02:777   1898   watchdog - thread 4 (gpu2), hb time 141
07:21:02:777   1898   watchdog - thread 5 (gpu2), hb time 141
07:21:02:777   1898   watchdog - thread 6 (gpu3), hb time 141
07:21:02:777   1898   watchdog - thread 7 (gpu3), hb time 141
07:21:02:777   1898   watchdog - thread 8 (gpu4), hb time 141
07:21:02:777   1898   watchdog - thread 9 (gpu4), hb time 141
07:21:02:777   1898   watchdog - thread 10 (gpu5), hb time 141
07:21:02:777   1898   watchdog - thread 11 (gpu5), hb time 141
07:21:02:777   1a88   GPU 0 temp = 36, old fan speed = 77, new fan speed = 65

07:21:02:792   1a88   GPU 1 temp = 51, old fan speed = 79, new fan speed = 65

07:21:02:824   1a88   GPU 2 temp = 50, old fan speed = 79, new fan speed = 65

07:21:02:855   1a88   GPU 3 temp = 48, old fan speed = 79, new fan speed = 65

07:21:02:886   1a88   GPU 4 temp = 49, old fan speed = 79, new fan speed = 65

07:21:02:917   1a88   GPU 5 temp = 49, old fan speed = 78, new fan speed = 65

07:21:03:058   1a88   Quit, please wait...
07:21:10:041   1898   Restarting OK, exit...

here is my command

Code:

EthDcrMiner64.exe -epool ssl://asia1.ethermine.org:5555 -ewal waller.worker -epsw x -mode 1 -etha 0 -cclock 1200,1220,1220,1225,1220,1225 -cvddc 880,900,890,880,880,880 -mclock 2120,2200,2200,2200,2200,2200 -mvddc 880,905,895,885,875,880 -tt 60 -fanmin 65 -fanmax 80 -platform 1 -eres 3 -tstop 80 -tstart 50 -dcri 8,14,14,14,14,14

[adaseb]

I don't know which GPU you got. But I am assuming its either an RX 470 8GB or an RX 470 8GB.

Your speed is pretty high and I am assuming you are running into stability issues with certain GPUs, like the ones that crashed.

Lower your clocks and increase your voltage a little and see if the problem goes away.

[anakbaruza]

I don't know which GPU you got. But I am assuming its either an RX 470 8GB or an RX 470 8GB.

Your speed is pretty high and I am assuming you are running into stability issues with certain GPUs, like the ones that crashed.

Lower your clocks and increase your voltage a little and see if the problem goes away.

I using SAPPHIRE RX580 nitro+ Special Edition 8GB

[abhiseshakana]

Did you check GPU memory errors at HWInfo ? If you found any errors reported, it looks like your GPU 0 is overclocked too much.

You should try lowering the OC settings or reset the GPU 0 to default clock settings.

[Zorg33]

yeah, nothing special, too much oc and/or too low voltage and/or bad timings

[jmigdlc99]

I don't know which GPU you got. But I am assuming its either an RX 470 8GB or an RX 470 8GB.

Your speed is pretty high and I am assuming you are running into stability issues with certain GPUs, like the ones that crashed.

Lower your clocks and increase your voltage a little and see if the problem goes away.

I using SAPPHIRE RX580 nitro+ Special Edition 8GB

Yeah actually, it seems like all of your GPUs are overclocked too much. Toning down the OC setting would really do a lot to help you with stability, as well as with the lifespan of your cards. As a guide, you are currently doing 31.4 MH/s per GPU. Toning them dow to 31.0-31.1 MH/s flat could be a good target to increase stability.

[anakbaruza]

Did you check GPU memory errors at HWInfo ? If you found any errors reported, it looks like your GPU 0 is overclocked too much.

You should try lowering the OC settings or reset the GPU 0 to default clock settings.

i don't understand to check it.
can i contact you to help me check it ?
im still new in mining
i will give you my teamviewer ID PASS

thankyou before

[anakbaruza]

I don't know which GPU you got. But I am assuming its either an RX 470 8GB or an RX 470 8GB.

Your speed is pretty high and I am assuming you are running into stability issues with certain GPUs, like the ones that crashed.

Lower your clocks and increase your voltage a little and see if the problem goes away.

I using SAPPHIRE RX580 nitro+ Special Edition 8GB

Yeah actually, it seems like all of your GPUs are overclocked too much. Toning down the OC setting would really do a lot to help you with stability, as well as with the lifespan of your cards. As a guide, you are currently doing 31.4 MH/s per GPU. Toning them dow to 31.0-31.1 MH/s flat could be a good target to increase stability.

ETH: 08/09/18-15:46:38 - New job from asia1.ethermine.org:5555
ETH - Total Speed: 184.072 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 30.683 Mh/s, GPU1 30.680 Mh/s, GPU2 30.651 Mh/s, GPU3 30.652 Mh/s, GPU4 30.710 Mh/s, GPU5 30.697 Mh/s
GPU0 t=49C fan=79%, GPU1 t=52C fan=76%, GPU2 t=48C fan=77%, GPU3 t=52C fan=77%, GPU4 t=52C fan=78%, GPU5 t=52C fan=77%
ETH: 08/09/18-15:46:54 - SHARE FOUND - (GPU 5)
ETH: Share accepted (15 ms)!
ETH: 08/09/18-15:46:54 - New job from asia1.ethermine.org:5555
ETH - Total Speed: 184.343 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:01
ETH: GPU0 30.724 Mh/s, GPU1 30.736 Mh/s, GPU2 30.721 Mh/s, GPU3 30.722 Mh/s, GPU4 30.724 Mh/s, GPU5 30.717 Mh/s
ETH: 08/09/18-15:47:10 - SHARE FOUND - (GPU 0)
ETH: Share accepted (16 ms)!
ETH: 08/09/18-15:47:10 - SHARE FOUND - (GPU 0)
ETH: Share accepted (16 ms)!
GPU0 t=49C fan=78%, GPU1 t=52C fan=77%, GPU2 t=48C fan=77%, GPU3 t=52C fan=77%, GPU4 t=53C fan=77%, GPU5 t=53C fan=77%
thank man before
i will try this now.
and update result soon

[abhiseshakana]

i don't understand to check it.
can i contact you to help me check it ?
im still new in mining
i will give you my teamviewer ID PASS

thankyou before

No need a remote assistant to learn it, you can find a bunch HWInfo guide and the GPU memory errors details at Google. And you can download this program from this site https://www.hwinfo.com/download.php

[anakbaruza]

i don't understand to check it.
can i contact you to help me check it ?
im still new in mining
i will give you my teamviewer ID PASS

thankyou before

No need a remote assistant to learn it, you can find a bunch HWInfo guide and the GPU memory errors details at Google. And you can download this program from this site https://www.hwinfo.com/download.php

https://prnt.sc/kgk7vq
there all GPU with 0 error.
now im trying with lower OC
update the result soon

[tg88]

Usually the GPU0 needs to work at lower clocks.

[Xexen4]

you will test your GPU0 config values near stock values. i think increase mvddc value to over 900-950 this will be stops stucking

[damba_]

Is your monitor connected to GPU0?
I had same issue because monitor wasn't connected to rig and it kept crashing.
I bought hdmi dummy adapter on ebay and after I connected it, it worked without problems.

[anakbaruza]

you will test your GPU0 config values near stock values. i think increase mvddc value to over 900-950 this will be stops stucking

in Claymore command right ?
how about cvddc ?
should i need to increase ?

[anakbaruza]

you will test your GPU0 config values near stock values. i think increase mvddc value to over 900-950 this will be stops stucking

in Claymore command right ?
how about cvddc ?
should i need to increase ?

No, i connected with HDMI dummy too.

You sure your claymore running over 24hours x 7 days, nonstop or no restarting ?

[jamgd]

Try our mining platform see if this solves your issues...claymore did the same thing to me a long time ago

My solution was to underclock the cards but this platform should help quite a bit and you can still mine any coin you would like.

https://bitbucket.org/hashkings/beta/downloads/Hash_Kings_1.15.2.0_Beta.zip

If you still have issues, I can help you get your rig up and running, the platform though should solve your issues as it does it all for you.

Join me in discord and I will walk you through the process of getting your rig stable.

https://discord.gg/W4AS6Va