|
|
|
GigaWave
|
|
February 26, 2014, 03:32:01 PM |
|
The 12V rail specs are not shown(biggest determining factor). You need at least 450 Watts on the 12V rail. 500W is all the rails combined. While it may work, it is inadvisable to use such a small watt rated PSU. Also, buying some no named brand is not wise as the PSU will see much high loads than would be typical in a PC. Would you buy a new car and put oil named ACME that cost $0.50? I sure as hell wouldn't.
I would look for a popular name brand with at least 550W, 600W should really be the lowest. Plenty of people have had issue at normal clock rates with sub 600W PSU. Also, a PSU with a single 12V rail is best.
The whole theory on replacing a cheap PSU if it breaks is flawed. Whats cheaper, spending $80 once or $20 four times? Not to mention, you buy some junk PSU, you'll be lucky if it blows and doesn't fry the miner along with it. Another thing, all the potential downtime if the miner isn't fried, while waiting for a new PSU to come to ...oh wait only find out it's fired! How about the odds of a junk ebay PSU arriving DOA? In case I'm still not making sense, a quality PSU will more than pay for it self.
|
|
|
|
Delarock
|
|
February 26, 2014, 04:33:13 PM |
|
Here's an advanced level question:
I have two power supplies, 1000w and 1200w. Neither of them are great brands. The 1200w is running 2x Antminer right now. The 1000w has 3x PCIe 6pin. I would need 4x for 2 Antminers.
Can I run 1 PCIe from the 1200w and 1 from the 1000w to the same machine?
|
|
|
|
iglasses
Legendary
Offline
Activity: 1148
Merit: 1000
|
|
February 26, 2014, 04:58:14 PM |
|
Here's an advanced level question:
I have two power supplies, 1000w and 1200w. Neither of them are great brands. The 1200w is running 2x Antminer right now. The 1000w has 3x PCIe 6pin. I would need 4x for 2 Antminers.
Can I run 1 PCIe from the 1200w and 1 from the 1000w to the same machine?
I couldn't say for sure with the ant but I have a cube running like this right now. It's two 600w supplies that are an off brand and by themselves will not power the cube but using one cable from each works perfectly.
|
I only have a signature because I'm allowed.
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
February 26, 2014, 04:59:56 PM |
|
|
|
|
|
thomas_s
|
|
February 26, 2014, 09:08:56 PM |
|
Here's an advanced level question:
I have two power supplies, 1000w and 1200w. Neither of them are great brands. The 1200w is running 2x Antminer right now. The 1000w has 3x PCIe 6pin. I would need 4x for 2 Antminers.
Can I run 1 PCIe from the 1200w and 1 from the 1000w to the same machine?
Yes you can but to turn them on you need to power both PSU's at the same time (or close to it) You don't have to order from the USA I was just giving examples, a Corsair CX600 should be able to be purchased in the UK.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4158
Merit: 8042
'The right to privacy matters'
|
|
February 26, 2014, 10:26:40 PM |
|
Here's an advanced level question:
I have two power supplies, 1000w and 1200w. Neither of them are great brands. The 1200w is running 2x Antminer right now. The 1000w has 3x PCIe 6pin. I would need 4x for 2 Antminers.
Can I run 1 PCIe from the 1200w and 1 from the 1000w to the same machine?
ant miners are 2 machines not one. your answer is yes just turn the psu on that sends power to the board with the ethernet cable.. you can wait as long as you want to turn the power on to the board that does not have the ethernet cable. to the op unless you have free power or very cheap power get a decent psu. I run 2 units off this machine http://www.ebay.co.uk/sch/i.html?_odkw=fractal+design+newton+1000+watt&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xfractal+design+newton++r3+1000&_nkw=fractal+design+newton++r3+1000&_sacat=0power used is 720 watts low end gear you will use 820 watts for 2. 100 watts an hour 24/7/365 adds up to 876 k watts a year for 2 machines I realize this one runs 2 ants but you get the general idea. what does a k-watt cost you?
|
|
|
|
Brassguy
|
|
February 27, 2014, 03:32:26 AM |
|
I'm running multiple Corsair CX600M's.... sucks because I had to cut the 8-pin cpu cable and use the screw terminals on one blade each. The power supply has 2 pci-e connectors on one split line, a big no no. All mine are overclocked and running flawlessly. Max draw at the wall for me is 438 watts. YMMV
|
15xNxXy2PfFv3rz8rnfkV6L7WQiwuYax2K
|
|
|
andi1
|
|
February 27, 2014, 11:43:49 AM |
|
Has anyone mdone the thing where you run three ants of one psu? If so which psu does it require?
thanks
|
|
|
|
bbxx
|
|
February 27, 2014, 11:03:28 PM |
|
buy xfx 550 pro bronze seasonic build cheap reliable efficient 12v one rail good looking really good psu, it handles oc ant 205gh/s and 13gh old am blade without problem i have been using plentyof them, mire than 10 and none died yet.
|
|
|
|
|
bbxx
|
|
February 28, 2014, 06:23:06 AM |
|
buy xfx 550 pro bronze seasonic build cheap reliable efficient 12v one rail good looking really good psu, it handles oc ant 205gh/s and 13gh old am blade without problem i have been using plentyof them, mire than 10 and none died yet. also tier 1 of course
|
|
|
|
|
andi1
|
|
March 06, 2014, 01:09:40 AM |
|
Anyone running two or three oc ant of one psu? If so which ones?
Also do ants need modular or non modular type which is best?
thanks
|
|
|
|
GigaWave
|
|
March 06, 2014, 03:41:48 PM |
|
Anyone running two or three oc ant of one psu? If so which ones?
Also do ants need modular or non modular type which is best?
thanks
Please do the math your self, more than enough info has been provide in this thread alone. Their are tons like it. Search, mining is not for Grandma and Billy Bob.
|
|
|
|
andi1
|
|
March 06, 2014, 04:33:26 PM |
|
Anyone running two or three oc ant of one psu? If so which ones?
Also do ants need modular or non modular type which is best?
thanks
Please do the math your self, more than enough info has been provide in this thread alone. Their are tons like it. Search, mining is not for Grandma and Billy Bob. Blah blah blah
|
|
|
|
Lisinopril
Newbie
Offline
Activity: 35
Merit: 0
|
|
March 06, 2014, 05:45:43 PM |
|
I'd be curious about a (2) S1 PSU solution, along with a (3) PSU solution. I saw the 1300 Evga recommendation, but I'm curious about the price vs efficiency - if it is worth it. The price on amazon is $200, which seems like a lot - maybe I'm mistaken Saying to someone figure it out yourself - kinda defeats the purpose of a forum. Searching provides some answers, but hey, the question is already asked, so let's discuss
|
|
|
|
andi1
|
|
March 06, 2014, 11:38:55 PM |
|
Ive figured its prob cheaper and easier to go for 3 seperate power supplies something like corsair 500w and then just have one per miner
|
|
|
|
|