Help, setting up avalon 1

[treckpique]

Hi All,
i have a little problem with my avalon 1.
i can't get into the webinterface.

I tried to change my laptop IP to 192.168.0.101 like the asic wiki describes.
and then open a webbrowser and type 192.168.0.100 but no luck.

i can't get into it.
also the usb unit does not have any lights lighting up (supposted to be a blue led? )

can somebody please help me out 

[1715380232]

1715380232

[1715380232]

1715380232

[1715380232]

1715380232

[frankenmint]

Hi All,
i have a little problem with my avalon 1.
i can't get into the webinterface.

I tried to change my laptop IP to 192.168.0.101 like the asic wiki describes.
and then open a webbrowser and type 192.168.0.100 but no luck.

i can't get into it.
also the usb unit does not have any lights lighting up (supposted to be a blue led? )

can somebody please help me out 

Its used so its likely set to their old settings.  Contact the seller and ask him for the subnet used, he may have changed it to 192.168.2.101. 

You said there are no lights at all?  When you turn the unit on, does it it make any noise, like a loud fan noise when first powering on?  If not, then you have a bigger issue (dead psu)

[treckpique]

Thxs for the reply,

The unit fans are working (starting mode 2 times fasten up and than a normal constant speed)
a green lamp next to the fans (on the front of the case) lights up,
a green led on the inside of the board is also lighting up.

thats about it..
my router displays thats there is nothing connected.
could it be that the TPLINK unit is broken down?
or did i missed something.